4 Methods to Fix Stuck at Preparing Automatic Repair Black Screen issue in Windows 10/11

[@trainwrecka]

So, I’m stuck at a black screen and the solution is to use Windows to fix it? What even is this solution.

[@RecoveritDataRecoverySoftware]

Hi there, thank you for your question! If you're referring to a MAC machine then I would try reset your NVRAM/Pram by turning off your mac and when you turn it on immediately press the Option + Command + P + R. keys and keep holding it until you hear the startup sound or the mac logo then release the keys and let the MAC boot hopefully that helps. If that doesn't work id recommend taking it to the apple store to see if they can help with your issue.

[@dolph123454321]

You've basically just said how you don't know how to fix the issue you're describing in the title of the video. This guy said nothing about Mac. Whats wrong with this video: Question: how do i fix my computer that's stuck on "Preparing Automatic Repair" and thus won't load into Windows. Solution: load into Windows ??? I mean c'mon. Change the title that actually describes what you're trying to solve. As for my case, I'm stuck loading the boot media. Suggestion: stop regurgitating what is written all over the internet and find a way to fix the issue described in the title

[@nonkosi8021]

How do I fix my Samsung laptop stuck on "Preparing automatic repair" I've tried to press power button for few seconds, and power it back on. Still same problem persists

[@ALOMA-nj5kn]

Hello i have an isssue its still blackscreen i cant into safe mode cause when i boot up my pc it shows nothing on the screens and my mouse and keyboard don’t light up its just the pc that has lights

[@austenchulan4669]

Same. Mine is lenovo ideapad 3

[@stiven355]

My laptop keeps booting up into preparing automatic repair and it wont boot up normally anymore. I tried every option in repair mode and nothing seems to work. I can't even reset my laptop it just says "couldn't reset your pc no changes were made" it's crazy how they have all these troubleshoot options just for them not to work

[@RecoveritDataRecoverySoftware]

Hi there, thank you for your question! I would recommend trying to boot from a Windows installation media like a USB drive and then choose “Repair your computer” > “Troubleshoot” > “Command Prompt" and run the following commands:"chkdsk /f /r C:", "sfc /scannow" then restart your laptop and check if the issue persists.

[@epochxanimations]

My pc just ignores me and never leave this preparing automatic repair 😭😂

[@VeraltKaru]

How i do fix... Where after i just turn it on... It just loads Preparing Automatic Repair then after it's just black screen?

[@RecoveritDataRecoverySoftware]

Hi there, thank you for your question! I would recommend using a bootable USB drive to try and run your automatic repair and hopefully allow you to scan and repair you computer.

[@xamplegaming9236]

@@RecoveritDataRecoverySoftwarewhat is bootable usb isn’t getting through either

[@artemis2027]

My issue im having is the pc is booting up but then sfter the windows logo appears saying "preparing automjc repair" it just goes back and stays there until i restart. I cant get to the windows troubleshoot screen since i need a password i have never had.

[@RecoveritDataRecoverySoftware]

Hi there, thank you for your question! If you tried all the steps in the video I would recommend trying to make a bootable USB drive to try to run the automatic repair and hopefully solve your issue.

[@trainwrecka]

I left Windows for Mac back in the XP days. I came back a year ago and it has been an absolute nightmare of bugs and issues. Hours of troubleshooting videos in this single year. 20+ on Mac and I’m not sure I watched one.

[@rianDgy]

to everyone who got stuck at this try to unplug your gpu first and see if your motherboard has its own vga output, plug in your monitor cable to that output and viola, you can see the repair screen after the windows fixed you can use your gpu again it works for me

[@SushiSniperX]

I have a question I tried the instructions you said and after every time it restarts it just keeps saying auto magic repair then it’s a black screen the it starts over I think I might take a if a shop to have it fixed but would it be expensive do you know

[@RecoveritDataRecoverySoftware]

Hi there, thank you for your question! I would recommend calling a pc repair shop and asking for a quote it's hard to tell what the price will be since it can vary.

[@yumihikokitsuragi1377]

Hi, i still have the issue. when i start my pc it shows the motherboards brand and below it the Preparing automatic repair. The issue is that the little dots do not make a full circle before it shuts down by itself. I have tried placing another ssd from an old laptop but it still did the same thing. Have you ever encountered this?

[@RecoveritDataRecoverySoftware]

Hi there, thank you for your question! If you tried the steps in the video and nothing worked I would recommend trying to reset the CMOS battery in the motherboard. If none of that works I would recommend taking it to a professional for further assistance.

[@yumihikokitsuragi1377]

@@RecoveritDataRecoverySoftware Thank you so much for taking the time to respond to my question.

[@ragesservises6989]

You ever figure out the problem ?

[@ragesservises6989]

?

[@notorious_amature9665]

Same problem

[@TheOriginalJenafire]

So what option when you can't even get into safe mode?

[@RecoveritDataRecoverySoftware]

Hi there, thank you for your question! I would recommend downloading windows onto a USB Drive and then using the bootable USB drive to run your safe mode on your device.

[@xamplegaming9236]

@@RecoveritDataRecoverySoftwarewhat if safe mode can’t be accessed EVEN through a usb with windows on it… I know it’s working usb bc my sons oc works fine with it

[@oguzhandogan151]

I have black screen and my mouse and keyboard doesnt work after reboot , how can i fix it?

[@RecoveritDataRecoverySoftware]

Hi there, thank you for your question! First ensure all connections are secure. Try power cycling by shutting down, unplugging, waiting 30 seconds, and restarting. Boot into Safe Mode by pressing F8 (or Shift + F8) during startup to check if a driver issue is causing the problem. Disconnect unnecessary USB devices or external drives that might be conflicting, and try connecting to a different monitor or using another display cable. If comfortable, reset your BIOS/UEFI to default settings by entering the BIOS (usually F2, DEL, or F10) and saving the changes. As a last resort, use a Windows installation USB/DVD to access the Startup Repair tool in the Troubleshoot > Advanced Options menu.

[@Fmg-yw5qi]

Hate this video so much 😢

[@jeseemuba2722]

Man ive stuck in the screen showing diagnosing your pc for 2 days, and ive tried to restart multiple times

[@RecoveritDataRecoverySoftware]

Hi there, thank you for your question! I would recommend trying to hard reset your pc by unplugging all the power cables or remove the battery from a laptop then leave the pc off for a few minutes so all temporary cache can be cleared then trying turning it back on. If your PC still gets stuck, consider using the EaseUS Partition Master Professional. This tool allows you to create a bootable USB and repair problematic Windows. It scans for missing or corrupted system files needed for booting and replaces or repairs them.

[@jeseemuba2722]

@@RecoveritDataRecoverySoftware thanku for your reply, tried it many time still not working 🥲

[@light_switch___8920]

​@@RecoveritDataRecoverySoftwareI've tried that along with other things and nothing works

[@13air-k3y]

Idk if u r gonna reply but my problem is when is start my pc the motherboarf logo apears and then it get stuck I cant even enter the bios and I have already tried hard reset by pluggimg the cable on and off again and again but I cant enter the blue screen where it says the advance option it let me one time and I rest my pc but it takes me back to the logo screen now nothing is working 😢😢😢 Help me pls its a new build and I cant even turn it on now from the last 1 week

[@RecoveritDataRecoverySoftware]

Hi there, thank you for your question! I recommend checking all the components inside your computer to ensure they're plugged in correctly, especially the RAM. If the problem persists, try removing the CMOS battery from the motherboard. If that doesn't work, I recommend taking it to a professional for further assistance.

[@vortexlt738]

I disabled my laptops keyboard(via making it install a wrong keyboard file(as in this case a samsung one while my laptop is asus), and ever since, it just says this automatic repair or is on the turning on loading screen infinitely. I did enable it back to the correct one in safe mode, yet still nothing is working...

[@RecoveritDataRecoverySoftware]

Hi there, thank you for your question! If you believe its because u installed the wrong keyboard file try rolling back the driver by using windows key + R then type "devmgmt.msc" and press enter. click on the keyboard device and select delete driver and then try update it afterwards. Try running a SFC scan by using command prompt and then type "sfc /scannow" and press enter.

[@aequoreal_hehe]

So here's my problem.. i had two monitors attached to my pc.. i removed one and now use only one monitor.. its an acer monitor.. the day i removed it at night.. the next day it was working fine in the day.. bjt im the evening i tried to turn it on then it was stuck on windows loading screen.. i force shut down it.. restarted again few times.. then the preparing automatic repair screen came.. and after that no diagnosing your pc is showing up.. its stuck on a black screen with a slightly bigger cursor.. this has been happening agin and again.. i cannot get to the blue screen where it shows select options.. i also tried removing and putting my ram back in because i thought it may be loose .. but nothing happened Please help meee😢

[@RecoveritDataRecoverySoftware]

Hi there, thank you for your question! I would recommend trying to use a bootable USB drive with windows installed and see if you can get into windows to try run some diagnostic tools as it seems its probably more of an issue with the internal components of your computer.

[@D0wnButN0t0ut]

I hate to be the bearer of bad news, but I had this same issue and at least in my case it turned out to be a failed CPU 😪 good luck out there...

[@charlesmckenna712]

I've got no problems must be doing it right thank you for your talk Me

[@ChrisXedits11]

I’ve been trying to fix for 2 days I’ve tried everything and it’s just not working 😢

[@RecoveritDataRecoverySoftware]

Hi there, Could you please elaborate on your issue when did it start happening what solutions have you tried? We're glad to help.

[@ChrisXedits11]

@NaZia_bts_army_O.T.7 i manged to get it fixed. you need to buy a fresh new ssd and then redownload windows

[@maxercreater6620]

My laptop can't even enter safe mode and my keyboard can't press anything it kept beint stuck on Preparing Automatic Repair

[@RecoveritDataRecoverySoftware]

Hi there, thank you for your question! I would try power cycling the device by holding the power button until it shuts off, then restart. You can also try interrupt the boot process by turning off the laptop during startup three times to force entry into the Windows Recovery Environment. You can also try using an external USB keyboard in case the built-in one isn't responding. If that doesn't work, create a bootable Windows USB drive on another computer, boot from it, and select "Repair your computer" instead of installing Windows. Once in recovery mode, go to "Troubleshoot" > "Advanced Options" > "Startup Settings" to access Safe Mode. Additionally, you can run a disk check by using the command chkdsk /f /r from the recovery command prompt to check for errors.

[@maxercreater6620]

@@RecoveritDataRecoverySoftware thanks it works now

[@precisionxhost4147]

I have the black screen and it says hard disk not found what do I do

[@RecoveritDataRecoverySoftware]

Hi there, If your external hard disk is not showing up in disk management, it's possible that there is an issue with the connection between the hard disk and your computer. Here are some steps you can take to troubleshoot the issue: Check the cable and connections. Check if the hard disk is spinning up. Check if the hard disk is recognized on another computer. Check the power supply. Try data recovery software. Download Recoverit here: bit.ly/3ZoowNK If none of these steps work, it's possible that the hard disk has failed and may need to be replaced.

[@MRmaloo7395]

Hello when i try to do bootrec /footfix its shows access denied

[@RecoveritDataRecoverySoftware]

Hi there, thank you for your question! Make sure to run it with Administrative privileges this should fix the issue.

[@arminafghani]

Buddy I was using my PC as usual and one day while turning it on it was much taking longer than usual(mine usually booted within 5-6 seconds but even if I had it running for 30 minutes it didn't boot). Then I hit the restart button but this time it showed preparing automatic repair and then after a while it took me to a black screen with only my mouse pointer. I'm scared bro, this pc costed me a lot. 😭😭

[@RecoveritDataRecoverySoftware]

Hi there, thank you for your question! Could you provide me with any more information on why you think this issue occurred did you download any new software or do anything different from the norm? I would recommend creating a bootable USB drive and trying to run windows from that and then attempting to repair your computer using the USB.

[@rianDgy]

try this bro tunplug your gpu first and see if your motherboard has its own vga output, plug in your monitor cable to that output and viola, you can see the repair screen after the windows fixed you can use your gpu again it works for me

[@xamplegaming9236]

@@rianDgywhat if no on board graphics?

[@rianDgy]

@@xamplegaming9236 i dunno, i think the last thing you can do is reinstall the windows or borrow someone's GPU just to show that damn repair screen

[@xamplegaming9236]

@@rianDgy I took the gpu out of my sons pc it’s doing the same thing I’m in the process of testing every single part on the damn thing. Pulling my hair out

[@BrokenEgg348]

Hey, what do i do if i dont have startup settings?

[@RecoveritDataRecoverySoftware]

Hi there, thank you for your question! Press the windows key + R Then type "msconfig" and hit enter then go to the boot section check the safe boot option and confirm then you should be able safe boot.

[@BrokenEgg348]

​@@RecoveritDataRecoverySoftware i kinda cant type nothing, only in command prompt i can type. Im stuck in advanced options and every time i reset my computer it says choose your keyboard layout. After that it says choose an option. I only have troubleshoot and turn off your power. After i click troubleshoot i have startup repair, command prompt, uninstall updates, UEFI firmware settings, system restore, and system image recovery. I may have deleted something off my computer that got me trapped in this loop where the startup repair or system restore doesnt work. I really need help.

[@SlapManTV]

hi my pc is at that part that its loading preparing automatc repair but it aint windows its tuf gaming😢

[@RecoveritDataRecoverySoftware]

Hi there, thank you for your question! If you tried all the steps in the video I would recommend taking it to a professional for further assistance.

[@RuseRour]

I’ve been stuck on the automatic repair screen for 2 days I can’t get my laptop onto the blue screen with the options on it

[@RecoveritDataRecoverySoftware]

Hi there, thank you for your question! Try run system repair tools, such as chkdsk and sfc, to check and repair any missing or corrupted system files. You can do this by booting from a Windows installation media (such as a DVD or a USB flash drive) and choosing “Repair your computer” from the first screen. Then, select “Troubleshoot” > “Advanced options” > “Command Prompt”. In the command prompt, type chkdsk /f /r and press Enter to run the chkdsk tool.

[@uzodinmafortune4995]

Same here what do I do? 😢

[@jaydeedutoit]

Did you get it fixed

[@RuseRour]

@@jaydeedutoit nope

[@aayushkumartarai9653]

I am strucking at diagnosing your pc forever everytime

[@RecoveritDataRecoverySoftware]

Hi there, thank you for your question! Can you provide me with some more information on your issue and ill be happy to assist.

[@marevildeonila]

Stuck until preparing automatic repair only and black screen

[@RecoveritDataRecoverySoftware]

Hi there, thank you for your question! I would recommend try disabling Automatic Repair using a Windows installation media by accessing Command Prompt and typing bcdedit /set {default} recoveryenabled No. You can also run a disk check (chkdsk C: /f /r) via Command Prompt to detect file system errors. If you have a restore point, try performing a System Restore through Advanced Startup Options. Additionally, disconnect any external devices to rule out hardware interference, and check for faulty RAM by removing one stick or running Windows Memory Diagnostic. Lastly, you can replace boot files using bootrec commands in Command Prompt. If none of these methods work, hardware issues like a failing hard drive or graphics card may be the cause.

[@XOX174]

I have an issue for windows 11 I was curious about the "diagnostic startup" In msconfig and when i ran it it showed a black screen how do i fix this?

[@RecoveritDataRecoverySoftware]

Hi there, thank you for your question! I would recommend trying to boot into Safe Mode by forcing a shutdown and restarting three times to enter Automatic Repair mode, then navigate to Advanced options > Troubleshoot > Startup Settings > Restart and press F4 for Safe Mode. Once in Safe Mode, open the Run dialog with Win + R, type msconfig, and select Normal startup under the General tab, then restart your PC. Alternatively, you can reset the display by pressing Windows + Ctrl + Shift + B, or connect an external monitor to check if the display works.

[@XOX174]

@@RecoveritDataRecoverySoftware i tried safe mode it doesn't work

[@XOX174]

@@RecoveritDataRecoverySoftware ctrl+shift+b doesnt work too

[@XOX174]

@@RecoveritDataRecoverySoftware all i can do is open my UEFI firmware settings

[@similoluwabankole5088]

Thank you, you're a life saver

[@Nitesh0.5]

Sir my laptop showing only black screen please help 😢😢❤

[@RecoveritDataRecoverySoftware]

Hi there, thank you for your question! If you have tried all the steps in the video I would recommend trying to use a different cable are there any specific issues or things you can tell me about that might have caused your problem?

[@sartic]

The shift f8 dont work

[@RecoveritDataRecoverySoftware]

Hi there, thank you for your question! I would recommend you try accessing safe mode from Windows by going to Settings (Windows + I), selecting Update & Security, then Recovery, and choosing Restart now under Advanced startup. Once your PC restarts, go to Troubleshoot > Advanced options > Startup Settings, then restart again and press F4 for Safe Mode. Alternatively, you can force the system into Automatic Repair mode by interrupting the boot process three times by holding the power button, then on the fourth boot, select Advanced Options to access safe mode.

[@HardGame334]

Nice shairing. Thanks ..... but i got window startup repair error .i try all mathod to solve , recovery image .comannd (add cod" bootrec"etc all.i have no usb .or cd .driver ..... how can i fix this error.plz must reply .is there any solution 4 me ... 😢 i have window 7.....if u habe any video about it paste the link please ....i search but not got any video.😢👍

[@RecoveritDataRecoverySoftware]

Hi there, thank you for your question! This can happen when there is a problem with the master boot record or the WINLOAD.EXE file. One option is to use the Startup Repair tool, which is part of the Windows Recovery Environment (WinRE) you need to turn your computer on and off three times. While booting, make sure you turn off the computer when you see the Windows logo. After the third interruption, Windows 10 will boot into diagnostics mode. Click Advanced options when the recovery screen appears. Click Troubleshoot. Click Advanced options. Then, click Startup Repair.

[@jasonisboss8531]

My computer isn’t loading in

[@RecoveritDataRecoverySoftware]

Hi there, thank you for your question! Can you provide me with some more information about your issue?

[@guitaraddicted10]

How to do in victus HP laptop

[@RecoveritDataRecoverySoftware]

Hi there, thank you for your question! The steps mentioned in the video should still work for your laptop.

[@mahirm7543]

Ur puka puniki in solutions iam from Brehempur

[@stephengisbourne7941]

All these so called fixes just do not work, what is the point listening to all these problem solvers and pressing all these damn buttons, for it to bring up stuff that is not shown on videos

[@RecoveritDataRecoverySoftware]

Hi there, thank you for your question! I would recommend trying to disable Automatic Repair by using a Windows installation media and running bcdedit /set {default} recoveryenabled no in the Command Prompt. Next, perform a System File Check (SFC) and DISM scan to repair corrupted system files by running sfc /scannow and DISM /Online /Cleanup-Image /RestoreHealth. Additionally, check for disk errors with chkdsk /r /f C: and disable Fast Startup through the Control Panel if you're able to access Safe Mode. A System Restore might help if a recent change caused the issue. Lastly, check your hardware, such as testing your RAM or running diagnostics on your HDD/SSD. If none of these methods work, a Windows reinstallation may be necessary.

[@stephengisbourne7941]

@RecoveritDataRecoverySoftware I went into that, and the only letter I had was 0, no g,r or anything that one video I'd seen showed me