How to Wire Electric Start on a Go Kart & Other Small Engines

[@enjoiboy385]

Can you make a video about installing the actual starter to something like a predator 212 that doesn’t come with one?

[@christopher33277]

This. Please

[@jg1746]

This comment needs to blow Up, I support this one whole heartedly

[@LightGesture]

Yeah, exactly what im thinking

[@danieldelarosa8806]

I lost focus all I could think about was did he have 🥞pancakes or 🧇waffles

[@lorenmeyer5290]

Great video! Very helpful! Thanks!

[@chrisperry1756]

Am I able to convert a non electric start to an electric start?

[@mre741]

Can you draw a diagram???????

[@peterburns1004]

Hey RBG Im a qualified mechanic....... I noticed that your not referring to open and closed circuits properly.......A open circuit is NOT a complete circuit and a closed circuit is a completed circuit....... Great video love your work.

[@davidalderman5496]

That was driving me crazy!!

[@RoundBoyRanch]

Ya, I was grinding my teeth over that....

[@charleslittle458]

Had most other terminology correct

[@yobentley7274]

yeah. drove my crazy too.

[@Jbro824]

Drove me nuts to listen to the wrong terminology.

[@ProbeGT2]

This is, i think, your most extensive tutorial. Everything is well explained, simplified and organized. Great job!

[@trentonjoziah1092]

instablaster.

[@username-mk8gf]

I used to think those cars that die at every complete stop were stupid, until I was told no, that's the best hybrid system you could have, because the engine doesn't have to be engineered to idle and the power requirement is easily met with regenerative braking, and because the starter motor is already reduced, you don't need a first gear. I wonder if these starter motors are capable of such a thing too, because you could potentially have a two speed transmission. I always enjoyed taking off with the starter motor in my neon.

[@andrewmasonwerdna]

9:12 pull the connection to check it, don't just assume, also soldering tips should be coated with pre melted wire before soldering helps penetration. I don't think I've cleaned it once, decade old gun never seen a wire brush, original tip, just the tip.

[@christopher33277]

Finally someone properly explains everything professionally! This is perfect timing as I'm adding that exact motor to my kart with head lights, electric start and charging coils. Thank you!

[@royalwilson6640]

Thank you for the time you spent to help us beginners.Thank you, you are appreciated..seriously

[@RedBeardsGarage]

We really appreciate you for supporting us. We couldn't do this without you. Also your welcome!

[@ericrobinson9340]

Can you clarify the purpose of the bottle of maple syrup in the background at around 4:30?

[@RedBeardsGarage]

Lol my son was eating waffles and hanging out in the garage that morning. I never noticed that.

[@jonpardue]

A fuse in the Yellow "always hot" wire would be a good addition. Good video.

[@justinchildress1453]

U could just use push button start

[@Tampaboys]

This was a very detailed video bud great job I really appreciate all the knowledge always have trouble with the wiring systems

[@bastianpaul2538]

Hi my name's bats and I am wondering if you know anything about electric start on the Tecumseh Inn 6.0 horsepower Yerf-Dog go kart if you know please let me know and thank you

[@tonesdrones7395]

Hey red I put 2 coils for charging my battery because I want to run turn signals and brake lights and a radio! Can I run all this off of my coils with a rectifier? And how many ac volts come off those coils?? Thank you! And by the way I love your videos keep up your good work friend!!

[@bobsbarnworkshop]

I bought a 440 this spring for my go kart and I just took the switch module off the engine and extended the wires. I found that the rectifier diode for the charging coil was inside the module. Not that you can’t move it back to the engine but be aware it’s there !

[@notajp]

On a lawnmower, L would be for lights, M is magneto. BTW, I don’t understand why you don’t follow convention and use red for battery hot. I generally use yellow for lights/accessories. Have built many wiring harnesses and that’s the way I’ve always done and seen it done.

[@duckyybabyy5]

UPDATE:1 year and still cranks within the first 2-3 pulls. Probably will buy another when this one finally does bite the dust kzbin.infoUgkx43QMbQqu67IZadu9ou8Sg1BdrunMRNqX . No issues at all. Very happy with it.UPDATE: After 6 months of use and over 70 uses I would still highly recommend this pressure washer. It does vibrate a decent amount but never had it “walk” like others have mentioned. No oil leaks, still seems to run like the day I bought it. Still cranks within 2-3 pulls every time. Very happy with my purchase!Have used it about a dozen times now. Plenty of power, cranks up on 1-2 pulls every time. My only complaint would be I wish it was a little taller to make it easier to walk with it (hits my ankles a lot) and that the two hose connections were a little further apart but it hasn’t caused me any issues. Seems to run a good 1-1/2-2 hrs on a full tank, overall a well built machine and definitely worth the money in my opinion.

[@callofdutymobilegameplaywi7217]

About to do this myself only problem is I am running a high compression build 223cc wildcat with forged rod +0.50 etc I am scared it won’t have the UMPH to even turn it over … I’ve read on some forums some people say high compression builds don’t work with electric start setups at all period … ummm…hmm any advice ?

[@geoffreyallen9687]

Hey redbeard I have a Colman 200uex. My plan is to put a tilitson 220 on it w/ electrical start. Will the same circuit work for that app? / And a side note pretty for me I've had some problems with ordering the things I need I'm hoping that this is not one of my selfish wims so I'm leaving it in God's hands. Keep up the good work!!!

[@armandcalunia7036]

Hey BEARDS that's cool explanation.... please WE ARE EXCITED TO WATCH HOW to do the set up of connection charging the Battery.. you have the Best explanation 5 star thumbs up

[@scottyockman7716]

Good video ! Is this switch also applicable for use with the predator 670? I have a vegas carts switch that I am having trouble with . Thank you

[@justlive56]

This video was posted at a perfect time. I'm about to swap the stock motor off my xtk go kart to a 16hp duromax and didn't want to lose the electric start.

[@reeseman4408]

I know this is an old video, but I have an issue with one of these dmax 440s 8n a golf cart. It doesn't shut off with the key switch, anyone got any ideas? I extended the keys wires to to the golf cart dashboard. I've searched and found a few ppl have this issue but no definitive fix...m

[@kwatt-engineer796]

Jst a slight refinement to corrosion on the wire. The copper cladding is very thin. It is there to compensate for the fact that bare aluminum will corrode immediately. The problem is that aluminum is sacrificial to the copper. The aluminum will corrode leaving the thin plating behind . Functionally the whole wire corrodes. The plating is likely not even visible

[@bryduhbikeguy]

I never remember to buy Heat Shrink,so I use my Permatex rubber gasket stuff and seal so no water gets into the wires,etc.No corrosion after 2 years still.

[@zeebull]

With an iwiss ratcheting terminal crimp, you can skip the soldering so long as you use the correct die for the terminal. Saves a lot of time. www.amazon.com/dp/B00Y7M7SG6/ref=cm_sw_r_cp_apa_fab_TgkFFb7NAW867

[@53slim89]

Looked at the Vegas switch on their website, has no info on how it's pinned, I'm sure you would do a bunch of us a favor if you could pin that switch as well...

[@MultiBassman55]

I am looking at a Predator 300series engine for my golf cart and I would love to hook up a electric start…show us how please!

[@carlossolano5003]

Do you have an idea on how to wire it to an existing harness ! I have a Chinese buggy with a Honda gx motor on it ! I’m getting an electric starter kit and would like it to start with the original key ! Any help would be appreciated

[@krissadams7259]

I enjoy video , way better most but it been nice if you would of shown your self connecting wires to switch that way even if ya don’t understand it all, this way you would feel secure it was 100% correct

[@mre741]

You showed us how to make the connection s but didn't explain very well what to actually connect to what.....

[@BankboiMulah704]

Awesome

[@michaelamykels6605]

I have an old snow thrower that has electric start but the way they get power is by plugging into a cord and the push start is on that box is that a voltage converter changing it from 120vac to 12vdc

[@mre741]

The way he trys to explain it is confusing.. why not just this goes here and then after explain what each is. .. yeah you definitely made this more complicated than it needed to be..

[@robertreaux8057]

So why the yellow 12v constant hooked up with the red 4ga from the battery what’s the purpose someone learn me lol

[@gabegibbs7898]

what if i dont have a soldering iron, i dont know anything about engines and im trying to figure out how to put electric start on predator 420. do i need to buy soldering iron.

[@mrshiloblack]

Good stuff. I would tin the battery cable wire prior to dipping it in connector though. Your creating a cold solder joint with your method. Also, a wet sponge is excellent for cleaning the solder iron after each use.

[@MrGrey-dx5sb]

Wow you really don't like your brother-in-law first 3 minutes tells the truth LOL

[@tylardixon3208]

So if I was to add light I would use the accessory spot on the ignition as my power source instead of going all the way to the battery?

[@TheClintmeister]

UUUUHHHHH!!!!! Why is there "syrup" in the shop?? You hiding some "special" Hot Rod "stuff" from us??

[@TheClintmeister]

I use "flux" before soldering to get the area super clean before soldering. I have used a "cigar lighter" as a solder iron, the focused flame works good.

[@MrDizzle715]

I know this is 2yrs old but what’s with the syrup in the background?

[@t-bone1890]

put the bigger batter in your Milwaukee soldering gun, and it works much better

[@74elsinore]

are you canadian? whats up with the bottle of maple syrup on the tool box? rotgfl

[@tylardixon3208]

Wired my sons go kart up and my hot wire started smoking that is connected to the starter. Any ideas?

[@ryandensley7688]

K on a tillotson 212 how do you regulate the power to the ignition oil?

[@tuckerbuzzell1882]

I got a 168f 6hp diesel engine how would I put electric start on it

[@Lfrperformance]

Ugh!!! Now I gotta spend some money on this stuff lol!

[@janynz0negonzalesvargas144]

Why !!! I’m building 1000w monstermoto/megamoto stage 1-212cc predator swap and I bought it 3 months ago and never ride it because of buy and adding just when I think I’m done a new expense shows up so I feel the same way u do .. btw wife YT acc

[@Damiantjuh]

is it possible to add a electric starter to a 2 stroke bike wich has standard only a kick-start?

[@nateboyd1758]

Will this also work for the HF predator 459cc ?

[@RealManSkills]

Thanks for a great tutorial. I am now going to buy a bunch of stuff! Do you think that I would need a bottle of syrup for the shop? God Bless Brother!

[@anthonytriolo3643]

If you show the diag. While you explain it it is better .

[@kylewhalley3573]

Any chance you can help identify where the coil kill switch is on my engine

[@ronaldmontenegro559]

What gauge wire was used on the switch and also how can I add a push start button

[@coreykennedy1st643]

I did everything the same way on my go kart but where to i hook up the charging coil wires at I NEED HELP I JUST HAVE NEW CHARGING COILS WITH REGULAR WIRES AND I NEED IT TO CHARGE MY BATTERY

[@coreykennedy1st643]

PLEASE I NEED HELPP

[@davidgriggers5677]

Is that a bottle of syrup behind you!!!?????

[@atomicdrop2788]

Does anyone know what size battery i should use?

[@aeranstroup5976]

Can I do this on a 319cc 8hp briggs and Stratton?

[@mongoosealltime7670]

I am wanting to make something with a Clinton engine will this work on it to?

[@jwalkerftw]

Does this apply for the tillotson 212 as well?

[@bearwood5547]

What do i need for like a ct200u-ex mini bike

[@Mustang086]

Love the video but do you think you could make a video with an electric start and charging system. I've been trying flip back and forth between your two videos on the topics to create a wiring diagram but it's been kind of difficult and tedious. I think you could help a lot of people out with a video combining the two systems.

[@nou755]

This is precisely what I've been trying to figure out, any insight on what you did?

[@HunterShelton-w3i]

Hey man I know this is super old video but I am hoping you will see this and be able to help me out. I have a yerfdog gy6 150CC and I can adapt this video to my wiring to install the John Deer ignition switch. Is there anyway you can do a video on that or get in contact with me to figure it out.

[@HunterShelton-w3i]

Excuse me “cannot adapt”

[@EPsanddrags]

I wanna see how u can hook up a rpm tach on one of these motors

[@leemer1]

Its easy if you use one of them rectangular garden tractor style digital tach/hour meters. Its one wire and the end gets wrapped around the spark plug wire at the boot about 6 times.

[@sanantoniocowboy82]

I see a golf cart limo canopy!!!! I cant wait to see that next video.

[@timelson6659]

I saw that too. I seached the comments first to see if anyone else saw it! Good Eye!

[@REAL_LIFE]

Hey Redbeard idk if you will see this but could you tell me if the tq converter from a predator 212 will bolt to a Duromax 212?

[@bigedd91]

great job explaining things. thanks

[@TheWilliammccormick]

You had me at rosin, again

[@fatbuddycat]

RBG, can you guys do a video on the basic tools and welder needed to get started? I'm relocating my steering wheel and while I'm waiting for my rear axle I want to try welding it together myself. I have a Chicago Flux125 and a 100 amp AC stick that can only handle 3/32 6013 and burns through everything with 6011 before it sets a good bead. What would anyone who reads this do??

[@rylandpriceg3211]

I'm trying to buy a 713 Duramax for my project but I cant figure out how to add something to the cart on Duromax.com

[@RedBeardsGarage]

generatorfactoryoutlet.com

[@JamesHarris-lu2cm]

What about charging the battery?

[@mikesmotoshop]

Getting continuity with the beep is closed circuit not open. An open circuit would have no continuity. But good tutorial I say M is Magneto which would be the coil like u said.

[@romansmetak9212]

mr. red beard, i have a question, which elect start kit fits the predator 212cc hemi, i just bought a new one and i was thinking of installing this on my motor, its on a 3 wheel bicycle along with said motor Ive seen a bunch of kits for hondas the one im interested in is on eBay its the Honda GX390 13HP GX340 11HP Electric Start Kit Flywheel Starter Motor kit, has flywheel starter key set etc. iM sure you're familiar with em is there any special tricks im going to run into? would appreciate any advice or e help u can provide LOVE YER STUFF MAN ITS REALLY COOL!

[@TheSkoto1]

I see you work on these a lot and just recently bought one for my old tuff built tractor. I shorted one of the cheap wires out moving the control box about 3 feet. It smoked the wire that has 2 wires in it and another. now no mater where I put that wire it won't cut off with the switch. Starts and runs great but won't shut off with the switch. I could just use another switch to ground it out but was wondering what it cooked besides the wire, 5 wires coming off the engine but only 4 in the switch box. Any idea. Yeah and i should have removed the fricking battery wire but got in a hurry, It is the stock wiring that came with the engine.

[@DannyKezar]

I love your channel bro, however your coming is all wrong brother. When crimped properly and with the correct tool, that connection would be just as strong as the solder. The open barrel crimp is a two party crimp and requires a certain crimper. Hit me up, I sell these components myself and can get you all set up. Keep up the great videos though bud.

[@socialmediaego]

@redbeard’sgarage hey will all this work for a Massimo Mb200 pull start engine ?

[@Midlifecrisismods]

Rbg, Thank you for the clear and concise guide on this. I've been following a lot of your performance and dino videos on the predator 212 and stuff to do with go karts. I purchased two 3 am systems to put on mine since it said in your video it would come with just one if it had one on my clone. Also, I'm using the non-heavy 212 and I ordered port and polished valves, a performance head and a 224 mirkani flathead carburetor as well as a straight true axle, upgraded tires and brakes. I forgot how fun go-karts really are and as a 41-year-old your videos are super duper helpful. Keep them coming

[@mtbsobe]

Hows the quality of a stock setup for these engines? It will not be on a gokart just a log splitter turning a 22pgm hydraulic pump. Thanks

[@PatTheBaker855]

Would the Vegas key switch work as a kill switch for the mb200 mini bike? It would be nice to have because i always worry about my bike when i run into a gas station and thinking someone could just walk up and start the bike and drive away with it

[@DarkCornerGarage]

Use an electric heat gun for the heat shrink. No overheating or burning issues then. Heatshrink, not flameshrink.

[@berrysbs6624]

hey redbeard i wanted to ask u a little bit about the 212 i got and the build i want to do i have about 200$ and an already upgraded 212 with a torque convertor an exhaust a air filter and jet kit and now im looking to make a little more power, i put together a cart on go power sports with a stage 2 cam 18 lb valve springs and i was either gonna get a off brand mikuni or just an assortment of jets to get the flow right but i was told by a friend to upgrade my rod too and im stuck between a carb or a billet rod and i really am not even sure if my engine will run after installing what i want i just need a little guidence on my build if u could please and thank you

[@uncletoddsgarage]

Great video! Thanks! But is that Maple Syrup behind you on the bench???

[@captaincaveman5766]

Great video. Dreading making a wiring harness for my Owosso BDI Explorer. I can't even work an ohm meter yet. Any chance for a "remote choke" video. Moving the choke up on the "dash"

[@TheWilliammccormick]

awesome video!!!!! I'm trying to install a cheap amazon rpm/mph digital display. Having issues getting a good place to read the rpm. Not sure if the wrap the wire technique works with the setup i have.. that said i'm assuming grounding everything out is probably going to be my answer. The 212cc reads if i connect to the spark plug bare wire, but it wont start. no starter just pull start. The tach goes up when i pull the chord. so that gets me some answers.... just gotta find out why its not allowing it to start.

[@kolbeybowen90]

Link to the next video?

[@tunechilee6052]

This is a very detailed and well explained tutorial!! I wasn’t looking for this video but I’m glad I found it. My uncle just brought my son an old go kart and I’m just trying to figure out how the choke works. I have no business doing anything you explained in the video but after some more research I have you to come back to if we ever decide to mod it. You got yourself a new subscriber!!

[@MegaKencam]

I'm looking forward to the charging system video. Please add suggestions for troubleshooting issues. I added a 2nd coil and a rectifier to my 420 and it will not charge my battery.

[@theoriginal300wsm]

Hey RGB I’ve got a few questions for you, is there anyway I can message you to pick your brain about a few things?

[@thedivinehammerswoodworks1895]

I see you are using that Milwaukee M12 soldering iron, I have seen nothing but reviews for it melting the collar or the heating element breaking in them, how long have you had yours? I am a Mechanic and I have the M12 ratchets so I was looking at this for working under dashes but if it melts or the elements fail, it will do me no good.

[@jonmartin5344]

Appreciate the video brother, my 5 boys are wanting to rebuild the old family go-kart, found an on sale electric starter, this video was great!

[@WHITECOBRA90]

So I just purchased a 7 horsepower Duramax I did a pretty good motor you think

[@janynz0negonzalesvargas144]

Q: so all I need is the starter and battery wires and a key / push start switch not the whole 212 predator starter kit ? Can anyone help me..

[@ronaldcurtis7909]

When you say "open" in reference to the switch, I believe you actually mean "closed" in order the current will flow

[@MrCarmelo1959]

Hi I liked this really informative I’m doing this to convert a battery gulf cart to a gas motor but it’s not key start engine. Until I follow your steps awesome thanks. But I need to learn to mount a starter kit to my engine from start to finish. Do have a video showing these steps thanks and yes I subscribed to your channel thanks

[@Jesse_Jessie_James]

That's the same vice's i use at work they come in handy. My daughter was like Daddy he has my go cart.. I busted out laughing and said he sure does. My oldest goes ur go cart is in the garage silly. She run's in there and se's it. The go cart is the same has her's. But has a 8 HP Brigg's and Stratton motor.

[@masonjordan4184]

Where can I buy the 670 performance build but with all the mods on it

[@Nativeborn2285]

still waiting on the other videos. i recently picked up a mini bike that has a honda gx160 with electric start and a headlight/taillight. im having to re-do everything cause the previous owner made a mess of it all.

[@bridgelund]

I've been wanting to make my mini bike Key (Electric) Start, thanks for the info

[@johnpoole7816]

Is that pancake syrup on the table @6 min. into the video, now we know why the karts are so sweet. You guys are great,love the videos, been a fan from the start. God has blessed you guys .