Fully Built Predator 224cc Mini Bike Top Speed & Street Ride

[@andrewwasson6153]

That 224 is so quick! Really like the lesson on equalizing the crank case and valve cover pressure. Love these mini bike videos!

[@RedBeardsGarage]

Glad you liked it!

[@tristanmcnabb2741]

🌟👍😃

[@shatteredreality87]

@Andrew Wasson - I agree %100, the main reason I watch Red Beards Garage is because of one simple fact. I learn tons of small details about building engines that are very important but other channels never tell you this information. Red Beard does not leave out anything, you get the smallest of details and that is what has helped me the most. With just what knowledge I've learned from this channel alone I've been able to cut down my build times significantly, while creating a better finished product in the process. So thank you Red Beard and my son and I really enjoy watching your videos.

[@gregsteele9002]

Me too, my Motovox mbx-10 pukes out oil at 31mph with the governor ziptied. Gotta carry an old-timey pocket flask full of oil on long rides. Now I know how to solve that, I think!

[@HunterStud-gw1fo]

@@RedBeardsGarage can you build me one ? I want the fastest one you can . I freaken love this .

[@shatteredreality87]

@Red Beard's Garage - The main reason I watch your channel is because of one simple fact. I learn tons of small details about building engines that are very important. For some reason all of the other channels will never tell you this information. It is almost like they purposely leave it out because they don't want you to be able to build anything or repair it yourself! Red Beard does not leave out anything, you get the smallest of details and that is what has helped me the most. With just what knowledge I've learned from Red Beard and this channel I've been able to cut down my build times significantly, while creating a better finished product in the process. So thank you Red Beard. Also my son and I really enjoy watching your videos, it's kind of like our Father and Son bond time. He is just getting to the age to enjoy engine builds and such so we watch every video together. Thank you for bringing us this great Channel and amazing Content!!

[@scottwilliams6257]

I like how it doesn't sound like a struggling lawn mower👍

[@RedBeardsGarage]

😎

[@Fukuimold]

Real people… real content! Zero fake click bait! Please don’t stop keeping it Real ! Appreciate you all

[@RedBeardsGarage]

Thanks for the encouragement!

[@82lube]

Definitely one of the BEST shows on KZbin

[@abels_04]

Back in the day me and my uncle would cruise our minibikes at 50mph down the road stock blue greyhound engines with governor bypassed and headers. Think my top speed was 57 and he could get his to 61. I had manco thunderbird with 38t rear sprocket his was a firehawk straight chained.

[@rayarthur586]

Just bein acouple of big kid's. Ain't nothing wrong with that. Always enjoy your videos. Thanks

[@acurarl9929]

I like the ballooning tire. It’s like and overdrive gear. That dont hurt you down low as it only kicks in at top speed

[@onoffservo]

I finally want one. I need a mini bike in my life. That's it, that's what missing...

[@RedBeardsGarage]

For sure! 🚲

[@dontmakememad6759]

Poor man’s motorcycle

[@greggthompson7]

This makes me feel like mini bike Monday is full on back….after the new shop has been built amongst tons of other work. Thanks for the info man.

[@RedBeardsGarage]

We've really enjoyed working on this series!

[@ashleyyoung4467]

I agree all the fun is building the bikes I have a Baja warrior I put a 110cc engine on about 4 years ago made it street legal i am still riding it when I don’t have it apart adding new stuff fixing what needs to be fixed

[@TheMdavis07]

Enjoyed the explanation of your breather setup. And yes your explanation of the one way valve made perfect sense. I like that you address the drain back as well. cheers. Love how you approach your engine builds. Cheers mate from northern ky.

[@RedBeardsGarage]

Glad it was helpful!

[@Kyle-v1d]

im working on rebuilding my jiang dong jf200 196cc for the TrailMaster mb200 with no money and patching and making homemade sketchy parts of whatever i can find and right now its broke down again and i had to pull the motor apart completely and with watching your videos it has been very helpful to me cause im not bad with fixing motors but ive got alot going on in my life right now and working with my hands helps clear my head and your videos have giving me alot of insperation plus we have the same nickname REDBEARD.

[@mindovermatter3988]

For future reference you can use mag wheel cleaner on any aluminum surfaces and we'll clean it up very well. Especially porous casted blocks that tend to hold in a lot of that extra grime. So again try out some mag wheel cleaner

[@acurarl9929]

Totally makes sense. 100%. The breathing and check valve ect. Great explanation.

[@tomortale2333]

THIS GUY IS SMART.,...KNOWS HIS ONIONS... AMAZING...

[@smokin27271]

I would really like to see the 460cc Predator motor in one of these bikes if it wouldn't take too many mods to the frame.

[@JoeSmith-xq8sz]

no way it would ever work!

[@smokin27271]

@@JoeSmith-xq8sz, Challenge excepted.

[@edgeofdarkness6132]

It should fit. Strip down the stock muffler and airbox and youll see. Haven't done it yet but at least with my frame, ct200u, would totally fit in there without the engine spacer

[@smokin27271]

@@edgeofdarkness6132 That's very cool. I'm hoping it will fit in a Trailmaster Hurricane 200X with aftermarket exhaust and carb. I also think with this frame the rear center bar on the frame will need to be modded/bent around the head/valve cover.

[@KuntalGhosh]

Toyota makes 300hp out of 3cyl 1.5l engine, So 500cc per 100hp or 1cylinder per 100hp. I know math doesn't work like that but. With enough mod a 500cc honda gx engine should be able to get 50-60hp i hope. They are making 25hp out of 5hp engine. So they should be able to make 60hp out of 12hp engine!.

[@sahibdipsandhu]

proud to be one of the early viewers to this masterpiece

[@bradleyj.fortner2203]

I dented a motorcycle gas tank once. I closed a trashbag in the filler cap to seal it, opened the petcock and pressed an air compressor nozzle to it. The tank swole up like a balloon and popped that dent right out.

[@chuckb9867]

That must be a good one when it works

[@bradleyj.fortner2203]

@@chuckb9867 It worked for me, and it doesn't hurt anything to try it.

[@chuckb9867]

@@bradleyj.fortner2203 thanks for the tip never heard of it

[@leonardarola]

You live you learn. Or you brake your back. Thanks for the ride.

[@bigmikeyc83]

This channel is great 👍 its like trailer park hotrods . Its unique because most ppl that want more power buy bigger better bikes,wheeler, exc but not everyone has the money for that and wants to upgrade their lil stuff cause its fun 😉

[@JVScustoms]

I completely agree with you on building these is half the fun, I’d say the building is more like 75% of the fun for myself. I just did a full build on a 224 and love that thing! Great video brother, stay safe

[@davegrossi7166]

Red Beard Rocks!!!! Thanks for all the info brother!!!

[@-Swervo]

this will be the first give away i enter for sure. I have a stock coleman so that engine would be a blessing and a half. fingers crossed 🤞

[@TwistedIntentions79]

Love seeing your new vids pop up

[@ezmac622]

You're fans in Rockwood love your channel! We also love the mini bike content!

[@RedBeardsGarage]

Awesome! Thank you!

[@tabdougherty8549]

I dig it good stuff !! Ghost engine from harbor fright turned me on to your channel

[@randylenart9674]

Good to see people playing around with this stuff have fun and be safe

[@lambolvr12]

Was waiting for this! I love your videos man, keep it up!

[@RedBeardsGarage]

Thanks! Will do!

[@jacobkress5382]

Plan on building mine this summer 💪

[@notimegarage8632]

You ever think about designing/making a custom air box location like how a dirt bike would be? Just think it would look sleek and help keep the carb clean

[@jesseshelby4383]

Don't forget about me when you give away Lonnies old engine. I'd take good care of it. 👍

[@jaredbudzinski8434]

Have you tried changing the timing of the engines with advancement keys? There may be some more power on the table if you take the timing from 24* ish up to 32. There may be some built in timing to the billet flywheels. That would be a good question for GPS.

[@jaredbudzinski8434]

GPS has 32 degrees of timing built into their flywheels.

[@ChrisJRSpro]

I love this. Idk how I haven’t found this channel before.

[@Dlokey4315]

Freaking awesome! Love the see the rebuild Red. Great show I'll to watch more. ✌️😎🤘

[@duggiebadd2804]

I own a Coleman Axis m200 224 crank start predator modified tops at 58. She's a beast

[@brennangorley7627]

Hey man great vid but really curious whens the 999cc duro video comin out?

[@teddysmith457]

You build some awesome toys

[@RedBeardsGarage]

Thank you 🤗

[@jesseshelby4383]

That thing is sick.💪🏼

[@jnkfishing9274]

Hey red beard ever used a wiseco forged piston in a 212 I'm currently building a stage 4 plus and was wandering if there is one that will work with the stock rod length

[@CODOutdoors]

Beatiful and powerful engines! Great job guys!

[@RedBeardsGarage]

Thank you very much!

[@roypatterson9910]

My Coleman CT200U-EX has the factory sprocket on the rear, and I have a TORQUE CONVERTER with the juggernaut, I have the Tillotson 225cc Performance Engine with a 24mm flat-side Mikuni carburetor and I get up to 59 mph, and if I change the sprocket, then I know I could hit over 60, but that would just slow down the take off some.

[@sammylisasmith2104]

Your confession thought me that I looked at that video and it helped me be a better person

[@treypeavler3451]

I was wondering since I’m gonna buy a billet aluminum side cover since I’m gonna have two ports going in and one of them going out to a pulse pump if I still need a one-way Barb

[@11spitdms]

Have you considered getting one of the x pro full suspension mini bikes off of Amazon? Seems to be a less expensive mb200

[@donniecothern9842]

Red you guys are kicking ass love the vids thanks !!!!

[@raynagy7660]

Enjoy the show watch it all the time great content!!!

[@RedBeardsGarage]

Thanks for the support! 💯

[@denmar355]

Seems to me the cheapest and easiest way to have a decent setup is the zip-tie on the Governor spring, 18lb valve springs, and a 58-60 tooth sprocket. Love your videos. I’m not far from you. Maryville. Stay safe. God bless.

[@johnconroy9555]

Those two are really quick.would love to see the 80cc two stroke put onboard a trailmaster that would rip. ..john Australia..😎😎

[@dylanpassmore8186]

So awesome. I’m excited to see what is done with these! I hope you read this, I have a micro sprint, it has an old Yamaha xs400 motor 5 speed. Thinking about putting a predator on it due to the xs keeps breaking. Worth it to give up the gears for a reliable predator?

[@thedude7726]

Yes with a cvt

[@safetyfirstintexas]

kzbin.info/www/bejne/bqDVcqWbp5iChMU do this with a gas motor and intermediate shaft.

[@kerbygator]

Rode mini bikes all my childhood and I never even thought about wearing a helmet. It never occurred to me. I'm lucky I made it.

[@peterchristlieb]

Man, I love the Jackshaft mounted torque converter on that thing

[@MrMr-tr6sk]

Should do another little bit on crankcase venting, pretty interesting

[@chadbraunwart2651]

Honda ruckus tires work for street tires on them

[@WoLFSkYBLuE69]

Damn I wish my CT200EX was that quick. Good work guys that's Great!

[@CainSample]

Hell Yeah Red Beard 🔥🤙

[@nathanieljohannes9434]

Awesome work man love your channel! You guys know if anyone has ever built a 13hp briggs and Stratton vanguard single cylinder. I have one on my chopper build I'm making and wanna do upgrades but can't really find much info on it! Thanks have a blessed day

[@johnny22single99]

ABSOLUTELY-----> OUTSTANDING!!!!!!!!!!. 🙂

[@CJLeTeff]

It would be awesome to see the top speed run done with street tires! 🤘🏻🤘🏻🎉🎉🎉🎉🎉🎉👍👍

[@denimjez]

I know the video is old, but you can breathe new life into your plastics with a heat gun or torch. It's isn't perfect, but close enough. The dent in the gas tank could also be persuaded with an aor compressor. Drain fuel, seal tank, add air. Start small. 30psi is a good starting point. Slowly add from there. Use a wood block with some leather attached to the impact area to knock down any high spots. Sometimes its best to repair over replace. Especially items that get the snot beat out of it. A boys toys are expensive enough.

[@rong4189]

Well shoot, I was hoping you guys would do a few rips around the Dollar General for old times sake, get the manager to come out and yell at you and all! 😂

[@matthewhasentufel6874]

Wow! A fellow Tennessean!!

[@NubsWithGuns]

@12:40 Is that why there is a mix of fuel water and oil all over inside my airbox? For a stock engine my bike does some messed up crap. I did swap on a non epa carb, maybe Im trying to push too much through it and it needs some tinkering? Idk .

[@fakename9024]

How bad are they without the rear shocks?

[@AmericanaWoods]

Dang those things are fast.

[@roymorrison833]

Really enjoyed your work

[@mikesbarn1858]

In my state Shell and BP don’t put alcohol in their premium gas. Check your states requirements. My stuff runs great on it and I can leave fuel in them all winter (not recommended) with few if any problems.

[@BigBulletsFly]

Hello, didn’t find the check valve in description. Where did you source that from? Thanks, years of knowledge from your page.

[@chuckb9867]

Great video I just wish you showed where those vent hoses go to the block up close

[@jamest.5001]

I want to build a swing arm for my china scoot, and put one of these on it,. I already got a extra front rim to bolt a sprocket to, being the rear has the brake drum and no bearings, that's what you need, a set if 10". Or 12" maybe 13" scooter rims and tires, well a set of front rims, The 80 cc big bore just ain't enough, being 6'5" and over 300, I need more power, A 224 with ported head, cut it for about 200psi compression, it should make plenty, I'd want to keep the revs down a bit, and keep it quiet, to sneak around as a 50cc scooter, use a stock motorcycle muffler maybe!...

[@hankburton2043]

Ah Donnie is a drag racer love your vid

[@deepbludude4697]

We are all gonna be riding these pretty soon cuz gas is outa control.....

[@RealestateKingThe1]

I have a fully built 224 also and with a mikuni carb and performance exaust and a max torque clutch with some internal upgrades as well I’m hitting 74 mph

[@nathanielfisher4269]

You can use 14" wheels and 14" scooter tires. They'll fit in the swingarm, and forks. However you will have to make hubs for the wheels.

[@joneserupinsmoke9161]

Damn bro that 224 is sweet

[@trucker2b]

Faqin nice az hell ... Big bark for a mini ... Sound mean as a twin

[@bubbasteele2991]

Oh yeah. I want the Engine. For my 13 year old twins their mini bike About to get. A refresh new Tires& Seat Coming. From GPS this week. RBG Code oh Yeah Baby. JC IS my savior too

[@officialaveryking2001]

Is the pcv valve and tubes in this video for oil blow by better than your oil catch can video?

[@farrismoore7524]

that 224 in the best SHE RIPS 😧

[@EJ-74]

Leaving your kick stand down can absolutely ruin your day 😆 Good looking out by the fella at the gas station. 🔥 Thing runs pretty dang good. 🔥

[@MountainEagle77]

What was the cost of the 224 build?

[@randystull1502]

Whatever happened to the Harley powered monster you were building

[@RedBeardsGarage]

It's still in NC.

[@sahsal1x569]

hey, what bike is it in 2:44 as i have an engine but want a bike the same size as the one showed in the video to install my engine onto thanks

[@BruceLyeg]

Have you tried scooter tires? or even scooter wheels and tires. Lots of 50cc scooters out there

[@Foebaned]

Shout out on the Placebo effect, caught that haha

[@lloydbaker7099]

Love the videos

[@Durfboard]

I would really like to know where he got that phone mount at 24:19

[@garylichtenstein943]

I have a 24mm mikuni that you used in the 224cc super build but the bolt pattern on the mikuni is the not the same as the mounting studs on the engine. How did you get the mikuni mounted to the engine

[@dustinh4175]

Im a novice motorized bicycle enthusiest and im starting to get minibike curious. Im wondering if a two stroke 250 motor would fit into one of those frames.

[@braydenlowe2024]

You should visit the Coleman powersports headquarters in Tempe Arizona!!

[@chrischris3222]

Once again you are da man RB how about a link for the check valve

[@deanmartineau4300]

Have you they about putting in EF? That would be cool to see

[@jenniferspharjenn42]

You guys are just kick ass cool and everything you guys do is fun and cool 😎

[@Singh_1989]

Can you give me a link for the fuel tank on the blue and black bike? That would be very much appreciated

[@RedBeardsGarage]

a.co/3cwRNOR

[@bodeine454]

Please excuse my ignorance here if you will but my understanding of these engines is that they're racing engines I believe, similar to the new racing engine that HF is now offering, not sure. My question is are these engines better suited for high rpm racing rather than low speed torque for messing around in the dirt and hill climbing or do they have enough low end grunt to out perform a stock Predator 212 say on a go kart or mini bike in the woods? That's what I like to do, play in the woods and climb hills, not as interested in top speed necessarily.

[@clintonjohnston2970]

Aren't Kenda road go tires belted

[@faolan571]

You ever broke a juggernaut? I had the bell on mine crack on the flats that lock it to the inner pulley. Gps is replacing it though

[@brycehill6678]

now I'm scared. I just built one of these exactly how you did, except it's going into a bicycle. I ran a predator 212 for about a year now. yeah I just wasn't scared enough when I started lol

[@dominicolson3574]

What app do you use for speed?

[@RedBeardsGarage]

Digi Hub

[@samtarariverasanchez59]

Is this Setup More of a Racing Mod or would it work in a gokart as well for torque!