RedBull Racing F1 2019

[@julietafernandez6326]

Que pegamento usas? Que hoja ocupas?

[@NusratSaba-hs1wu]

Where did u found the print outs of the first 2 papers?

[@engineergaming4295]

Can you do the new Red Bull RB16 b for the 2021 season?

[@monicaalvarez8414]

Para comprar las plantillas, como hago. Precio y modelos que tenés. Mil gracias.

[@Naksu1410]

Where can we get the prints for this?? Plss tell. 😅😅

[@marlonsimpon4856]

Req Redbull 2022 f1 please

[@fardeensaifi3001]

Please make more videos on F1 ,on defferent teams

[@30zn96]

We plan to produce variously. Thank you for your interest.

[@5what519]

I spilled water on that papercraft

[@YeshCrafty]

Ouch thats sad

[@xavieragostini9523]

Beautifull ❤🏎 pure art is a dream built f1 car

[@CesarBarros-uv3vb]

Como fazer um f1

[@eclipse889]

thank you it was so helpful I really apricate it

[@fandi3dofficial712]

link download is not found!

[@nijagamingvn]

I only see the rb16b version

[@jeet.bhavsar]

How are you able to stick different parts without the tabs? Are you using a separate strip of paper underneath the joints?

[@chandanasri7404]

Yes he stuck the paper onto some sort of chart, and used loctite glue, he mentioned in the description. Also tabs only for when ur using glue stick, or Elmer’s glue.

[@TonhaoMastersBR]

Beautiful work, friend! What kid of glue do you use?? Thanks in advance!

[@alejandrocruz6552]

Congratulations, a very good quality job

[@30zn96]

It is a three-piece model. Anyone can get good results if they work patiently.

[@engineergaming4295]

How do you get the rear wing to be so strong, considering that it’s held on by a small thin piece of paper

[@jatz_myg]

with opaline paper

[@DiegoSilva-dg3oe]

How do you handle instant glue? What tool do you use to remove it from the tube and use it on the model?

[@Youthuba]

How do you apply this glue? Mine just doesn't just fit into places like in the video

[@insanyiyen44]

Can I put the papers on the cardboard?

[@lbig]

Nice work!. What kind of glue are you using? And what are those reinforcements on the underside at 6:56?

[@nicolascardenas563]

loctite 401

[@30zn96]

All the adhesive surfaces are cut off and working. Since the one-sided and the one-sided are attached, there is no difference in the paper level. For models with many curves, a small piece of paper is cut to reinforce the seam. The difference in thickness of the paper can be eliminated by using the adhesive side on both sides. It doesn't matter what paper you use at this time. The gray color used as the background is an interior film.

[@wagnercoutinho7]

Hi, link broken ...

[@chandanasri7404]

Yes, the link won’t work anymore. You have to go to other websites.

[@sebaseortiz]

Excelente!!! pero como haces para pegar asi sobre bordes bordes??? sin las solapas

[@jesushernandez2948]

Kola loka !! Pero de igual manera hay que tener buenas manos, cosas que nomás no jajaja

[@martinkrivan4400]

Líbilo by se mi u takových videí, kdyby zde byl uveden autor modelu, měřítko modelu a kde, nebo jak byl model pořízený. Jinak stavba povedená.

[@chandanasri7404]

There’s no author, I mean, it’s made by Honda racing, and based off the Formula 1 car Red Bull RB15, scale is around 1:16, where and how? Where: your printer. How: using ink and paper.

[@groundedgaming]

This is literally why I will not do papercraft. Not because of the work it produces, I love that, but the off camera precision cutting, then the glueing??? And also, it’s pretty small and yeah… Way too difficult for me. But that also means, more respect for you.

[@christiandimas705]

how much glue to use to do it so easily????🤒

[@30zn96]

We do not recommend using a lot of adhesive. It is a type that only slightly absorbs the adhesive with the cotton and cotton glued together. The time for the instant glue to harden is very short, so a little skill is required. It is recommended to use a pointed needle or similar.

[@adauridavid7760]

Very good. What printer used?

[@Alexjr0005]

Show parabéns

[@khadijahadnan7888]

Absolutely amazing

[@aldrinjerome6755]

amazing job!! can you make the rb16 model or the at01

[@masterhybrid16]

AT101 is so hard

[@30zn96]

It is difficult to find out if a drawing of a paper model exists. Sorry.

[@aldrinjerome6755]

@@30zn96 it's ok but pls make more formula 1 models

[@chemav1887]

Podrías hacer el ferrari f40 o el lamborghini countach

[@everythingaviation7945]

I tried to build one but I gave up lol

[@javierzarate3102]

Modelo 2019 y 2021 trae las mismas piezas ??

[@brandonmichelmonreal7069]

Que pegamento usan?

[@chaselim4713]

Was this quite challenging to make? I want to make it but I don’t wanna jump into it as i don’t know if this is something for an intermediate creator, I’ve had a bit of experience but I’m still not sure, do you think it’ll be a bit complicated? Great job btw, keep up the good work!

[@fardeensaifi3001]

How can we join it

[@MSDJHERO]

You can download the template on the official RedBull site. Just google RedBull papercraft template.

[@30zn96]

The car is a bit difficult. However, I think it is possible. You can make it while checking where the parts are glued. Place the paper on the palm or finger and press the curved part to pass. Other than that, you don't need any difficult skills.

[@LomaT97Cool]

did you use A4 or A3 paper for printing ? Thank you for answer

[@prasadgorde]

A4

[@devjanilopa]

Love u bro

[@cruzdavidlares3569]

Hey buddy, you look great, I want to put it together, but what glue you're putting it together with

[@masterhybrid16]

I would recommend fevicol

[@30zn96]

I use Loctite 401.

[@thebaguettecompany]

@@masterhybrid16 no don't do that....

[@masterhybrid16]

@@thebaguettecompany yes I've learned my lesson 😐

[@fardeensaifi3001]

❤️ amazing

[@fardeensaifi3001]

How can I paste it

[@30zn96]

It is a method in which the instantaneous adhesive is slightly poured into the part with the end face and the end face attached.

[@30zn96]

kzbin.info/www/bejne/nmWxpHd5q5imfZo

[@ricardomuhl7455]

I love your job, congratulations. I know it may sound boring, but it would be really cool if you ever did an Eva of Evangelion

[@30zn96]

I will make sure to make Eva Unit 1 and upload it. After going through two or three models. What I'm worried about is that the joints are fixed... The model is standing halfway without being pretty. I am contemplating what posture to make and how to fix the joints.

[@ricardomuhl7455]

@@30zn96 I wish you good luck with that, and I look forward to it

[@strikersynceditz]

Where to get this

[@malabikabora2199]

This looks easier than the Mercedes

[@30zn96]

There are few drawings, and it can be easy. Curved representation can be a bit tricky.

[@malabikabora2199]

You are the best!

[@malabikabora2199]

Do you know Hrishikesh Kakati? Who commented on the Mercedes video?

[@fardeensaifi3001]

What type of paper you use and where can I find it.

[@30zn96]

It can be any type of paper. 120 grams is enough.

[@ignaciopacheco9638]

👏🏻👏🏻👏🏻

[@tmycrmona167]

tutorial