Redcat Gen 8 V2 Hex upgrade / Club5 / 8mm Brass Hex / Wider Offset Wheel

  Рет қаралды 4,103

Bobby England

Bobby England

Күн бұрын

Пікірлер: 15
@bukidman83
@bukidman83 3 жыл бұрын
Just a heads up, with wider hexes you will no longer be able to use the plastic lug caps. It takes up too much of the shaft. Also if you go wider than 8 or 9 mm, you will run out of threads and will need a steel shaft extender. You can get an even wider offset and look. Most 12 or 15 mm come with them in the pack but are slightly more expensive.
@comeandtakeit5709
@comeandtakeit5709 3 жыл бұрын
We’re you able to use the caps here with the 8 mm?
@bukidman83
@bukidman83 3 жыл бұрын
@@comeandtakeit5709 unfortunately not... you run out of threads and can't get the caps on. If you buy a kid with shaft extensions you can. The 11mm kit has extentions.
@mwfrost3427
@mwfrost3427 3 жыл бұрын
Get a set of nice metal beadlocks 😉
@gabrielguadarrama8701
@gabrielguadarrama8701 3 жыл бұрын
You can also try swapping out wheels and tires. Well that’s a must on this truck. Cheap aluminum beadlocks actually have an offsets that pushes the wheels slightly outward clearing this issue. And you won’t need a center cap and will not run out of threads
@mr.sinister1279
@mr.sinister1279 3 жыл бұрын
Widening the wheel base may also make it rub on the inside corner of the wheel well on full turns.. I kno I did the 8mm upgrade on my trx4 n it rubs..
@HBFTimmahh
@HBFTimmahh 3 жыл бұрын
I went with the +6 Treal Brass Hexes myself.
@comeandtakeit5709
@comeandtakeit5709 3 жыл бұрын
I don’t understand how you pulled it off so easy. I tried like hell to get mine off my axe edition earlier I even used pliers. They wouldn’t budge.
@bukidman83
@bukidman83 3 жыл бұрын
Yeah, they were actually pretty tight. I had to pry slightly. I had pulled the hex off previously to make it easier for the video. Still struggled with the camera.
@tofadeisastart
@tofadeisastart 2 жыл бұрын
Will these work on the Gen 7 pro?
@bukidman83
@bukidman83 2 жыл бұрын
I'm not sure. I think so. If the Gen 7 has 12mm wheel hexes they should work. Gen 7 is straight axle, not portals, but that shouldn't make a difference.
@Enzo100311
@Enzo100311 3 жыл бұрын
Hey i seen you on FB...you guna be a KZbin guy now? Whats your favorite mod so far
@bukidman83
@bukidman83 3 жыл бұрын
I'm everywhere! Haha. I personally think adding some weight down low has made the biggest difference. Weighted wheels and brass. Greatly improves crawling.
@Enzo100311
@Enzo100311 3 жыл бұрын
@@bukidman83 same here, brass and good tires and 2 stage foams transformed my rig!
@KingMrBigE
@KingMrBigE 2 жыл бұрын
Dude... invest in a tripod.
Huge Improvement | Cheap Brass and Aluminum Axle Upgrade on Redcat Gen 8 V2
12:16
Free upgrades Redcat gen8
8:48
DirtyRC
Рет қаралды 6 М.
啊?就这么水灵灵的穿上了?
00:18
一航1
Рет қаралды 61 МЛН
黑的奸计得逞 #古风
00:24
Black and white double fury
Рет қаралды 19 МЛН
إخفاء الطعام سرًا تحت الطاولة للتناول لاحقًا 😏🍽️
00:28
حرف إبداعية للمنزل في 5 دقائق
Рет қаралды 81 МЛН
🕊️Valera🕊️
00:34
DO$HIK
Рет қаралды 8 МЛН
RedCat Gen 8 Will 2.2 Tires Fit It?
8:34
Driftomaniacs
Рет қаралды 22 М.
Front wheel Alignment   Toe In :Out
21:04
D3Sshooter
Рет қаралды 462 М.
Is Toyota Quality Going Down? Here's the Truth.
22:31
The Car Care Nut
Рет қаралды 330 М.
HUGE Test 11 Tires! Best Crawler Tires for Trail? Gen 8 V2
20:38
Fixing the Redcat Ascent shocks
9:10
1Tenth Scale RC
Рет қаралды 8 М.
Redcat Gen8 // 10.7lbs // 4-link swap // 1.9 XL's
19:41
J-Steele RC
Рет қаралды 12 М.
啊?就这么水灵灵的穿上了?
00:18
一航1
Рет қаралды 61 МЛН