On the servo saver, which way do I turn to tighten my servo saver? Cuz I might be doing it wrong. My tires won't turn all the way to the left n right. Need help please
@soulrebelrc63412 жыл бұрын
It tightens to the right or clockwise. If the servo saver is worn out it will have trouble turning. Could be a bad servo. Make sure the steer dual rate is turned all the way up
@jimmyv17532 жыл бұрын
How do you get the pins out of the front upper arm. The A-frame shaped piece broke and have access to it but the pin is stuck in there and there is no access to push it out from the other side
@soulrebelrc63412 жыл бұрын
I looked on mine and there's a hole you should be able to use a pick tool and push it out. If the hole isn't there then try removing the pin set screw and use a pick tool or something that fits in the set screw hole and try walking it out till you get enough to grab onto with pliers. Hopefully this helps
@jimmyv17532 жыл бұрын
@@soulrebelrc6341 thank you. I got it. That is exactly what I was trying to do. With as little tear down as possible. I ended up cutting the remaining V shape and with the outer edge it came out. Thanks for offering some advice I appreciate it.
@brianalexis93632 жыл бұрын
Where do you buy the upgrades for steering
@soulrebelrc63412 жыл бұрын
BRS hobbies
@emmanuelvargas8662 жыл бұрын
Hey do you recommend this over the team associate mt8
@soulrebelrc63412 жыл бұрын
I don't own a MT8 so I can't really make that comparison. Sorry I can't help.
@winstonoso58213 жыл бұрын
Do you know if I should fill the shock oil all the way up or 2,3 cm from the top? I'm not sure...
@soulrebelrc63413 жыл бұрын
Just below the top, about 2 or 3mm, so the oil level would be just below the bladder when screwed on. You shouldn't get any oil coming out when u screw it down. If you overfill even by one drop it won't push in all the way in. If not enough oil it won't rebound all the way when pushed in. Make oil adjustments one drop at a time , until it rebounds how you want .
@winstonoso58213 жыл бұрын
Ey thanks man! Ur way worked for my kaiju shocks. Now I know how much oil to put n my shocks. Ur a great help. I appreciate it!👍🙂
@soulrebelrc63413 жыл бұрын
@@winstonoso5821 no problem sir , you're welcome 👍
@jimmyv17532 жыл бұрын
If you fill to the top it’ll just spill out when you cap it. Get as much as you can keep in there.
@mariopuzo45093 жыл бұрын
Man turning like that with my stock one. S***....shed be tumbling.. luckily mine doesn't turn at all atm so i don't need to worry bout' that
@blzsmh83 жыл бұрын
What kind of ramps are those
@soulrebelrc63413 жыл бұрын
home made , I kept adjusting and modifying until i was happy with the launch