Redcat Kaiju Upgrade! SwayBar Install and Test!

[@vincevargas7892]

Cool videos on the Kaiju...reading the comments also. 👍 Videos on Redcat are always a must watch for me on this channel. Very informative

[@RoadsideRC]

Thanks Vince!

[@rcadventures1056]

I have two kaiju ext and I love them!!!

[@RoadsideRC]

They are good trucks!

[@rccarsandmusic2641]

Swaybars are great

[@RoadsideRC]

For sure!

[@jdpaslRC]

Nice upgrades bro.

[@RoadsideRC]

Thanks!

[@ConditionZero76]

I'm sure you probably already did this but if not, extend your shocks out left & right as far as they can go on the last holes that'll help a good bit... 👍🏼

[@RoadsideRC]

Yes! Already done!

[@GarageLifeRC]

I have sways on the way. I think they will change it a lot

[@RoadsideRC]

Typically, the swaybars really help. It was hard for me to say for sure in this test.

[@billyb5057]

its better but of course you look for perfection know you will make it so much improved *fully watched 👍Au👍thumbs up*

[@RoadsideRC]

Thank you so much - working on it!

[@KurtsRCs]

I think you are right if you got a thicker bar it would help a lot more didn't seem to do much the way it was

[@RoadsideRC]

Yep - that is what I think I need to do. Might steal the one from my Kraton.

[@ThatSwedishGuy]

Yes the sway bar might be a tad bit thin, but when you installed them, did you have free movement of the sway bar? It should not bind at all at the mount on the diff case. If it binds there they will not work. Where the sway bar attaches to the arms you should be able to adjust the tention of the sway bar. A sway bar works by twisting it self, Hemse we call them torsion bar on our 1/1 Cars, if it binds at the diff case the sway bar is simply just gonna work as an extra spring for the suspension as no movement is transferred to the other side. Hope it helps, look up Adam drakes video on how sway bar works. ATB /Per Team Corally Bashers

[@RoadsideRC]

Thanks for the tip! You can't tell on the video, but yes - you could see the sway bar twisting from side to side...just not strong enough to do much! I see you are from Team Corrally - I haven't picked up one of those vehicles yet. I keep looking - they have peaked my interest for sure!

[@ThatSwedishGuy]

@@RoadsideRC your welcome, I'm not from team corally. I just run the Facebook group "team corally bashers" feel free to join as there loads of info in there about updates and such

[@d.smithim8306]

Are you supposed to compress the suspension when you final tighten the sway bar mounts ?? I had read somewhere awhile back that was how they were supposed to be mounted to get the full improvement from them ? Idk

[@RoadsideRC]

Good question! I guess it can make sense. I will try it!

[@GreatLakesRC]

Hex extenders would definitely help 👍

[@RoadsideRC]

I have them - I just get nervous putting all of that extra strain on the suspension.

[@gillian9178]

Simply make some new thicker sway bars with piano wire from the hobby store, you can make a selection using different wire gauges & dead cheap to do.

[@RoadsideRC]

You and I are thinking alike!!!

[@jaceSHO]

mark it with a marker before you try to line it up and any thicker bar wont fit in the spot where its supposed to go in the middle. Its already the perfect size for that gap.

[@RoadsideRC]

Great tip - thanks!

[@rcadventures1056]

I put them on with the hex wider and works a lot better

[@RoadsideRC]

That makes sense.

[@rcadventures1056]

@@RoadsideRC hey I need some help programming my esc on my kaiju ext

[@old-rcplane-phart]

Is this Kaiju 6s ready like the v1 was? (My v1 was best on 5s!👍). Thabks! 👍

[@RoadsideRC]

Yes it is! 6S out of the box!

[@RcNickster709]

Seems that's a few fixes for this now, to get it to run the way you want it. Sounds like you still need to upgrade. Not really making me feel like this would be that good of a rig to get, seeing the issues with the control arms and now the Sway bar inadequacy. Well done Troy. Thanks for sharing

[@RoadsideRC]

Ahh - don't take it negative. Redcat has said they are fixing the control arm issue now. This is me just showing an easy upgrade - that just didn't help as much as I had hoped. This is a very solid truck!

[@Naginc]

@@RoadsideRC Are you being paid or receiving any compensation or free stuff from Redcat?

[@RoadsideRC]

Nope - nothing at all. All of this is on my own dime.

[@RcNickster709]

@@RoadsideRC No No... When buying this rig. The issues you are dealing with, are in fact going to have to be dealt with though. That is al I am saying.. ;) Personally I appreciate the heads up.. :)

[@paulclancy2404]

Nice im on the fence about getting kaju , its hard to me to beat performance and value of arrmas since im well invested in the brand

[@RoadsideRC]

I enjoy trying different vehicles and designs. This truck has been really solid for me (except for the rear upper control arm - but we know Redcat is fixing it). This truck really is a good value - $150 cheaper than the Kraton 6S! Have fun with your Arrmas - I know I enjoy mine. :) If you think of branching out, this could be a good option!

[@toddcharlebois838]

He said to put the sway bar over the driveshaft but when the suspension travels the driveshafts rub on the sway bar, is that normal?

[@RoadsideRC]

After multiple batteries through it. No issues.

[@andrataylor6070]

My redcat machete wobble bad side to side in the back at hight speed.. do i need to put the 6s sway bar on my 4s? I have the Proline belted monster tires on it?

[@RoadsideRC]

That is unusual. I think this is usually due to the tires or gyro. But the Redcat does not come with a gyro installed. I would try different tires.

[@stormycannon8904]

I think it’s a bit under strength I agree with you heavier gauge would be better.😎

[@RoadsideRC]

Yeah, I think so.