Refilling Ink for T502 Eco-Tank Printer ET-2750, ET-2650, ET-4750, ET-3750, ET-7700

There is an "Auto-Stop" bottle and a regular refill bottle.
As for the original shaped bottles, you can just fit it inside the correct direction and let the ink drain on its own to fill the printer until it stops or reaches close to the top. (1:30)
Some earlier and older models will just have an open plug and you can just pour the ink inside. The newer models have a nipple that will have to feed ink slowly into the tube. This will be done with a bottle or a syringe if necessary. (2:30) and (3:00)
You will want to go to reset the ink levels and can access (4:37) :
Maintenance --- Reset Ink Levels -- Select Colors -- Diamond Key for Confirmation
This will prevent the printer from telling you to refill the ink levels .
See the links here for where I got these inks :
Epson T502 Eco-Tank ET Auto-Stop Ink Bottles (Epson only) :
www.amazon.com...
Regular Ink Bottles (Canon/Epson Compatible) :
www.amazon.com...
Great part for the regular ink bottles, it can be used for both Canon and Epson printers.
Canon GI-290 Megatank Auto-Stop Ink Bottles (Canon only) :
www.amazon.com...

[@JustNow42]

ET-2750 is a really nice printer, remember when the ink is more than half way used, to print, say each week, a sheet with all colors so the ink does not go dry). The software however is apparently made by 4 year old children without any experience in programming ( is child labor really legal?) , you can find on KZbin how to start your printer when it goes haywire.

[@inepetersen802]

What do I do if I inadvertantly let the blank ink fall below the the lowest line? My 502 bottle will not drain to fill it up.

[@hipupipisakula3498]

Can you rifil the bottle with that ink then rifil the printer with that???

[@robertbutler8004]

Why would you not use a small funnel?

[@TweakedSystems]

what is the difference between 502 and the T502 ink bottles

[@karengz03]

Mine never goes down . It looks empty all the time

[@carolyn_r]

do you have an amazon link with the ET type bottle applicator?

[@emerson9431]

Is this ink sublimation ink as well??

[@nicwilson58]

Bzzzzzzzt. Wrong. It does have ink level indicator on the printer and also in the driver and mobile apps

[@johneley3828]

What a plonker, tipping ink all over the place. If you really want to use up some ink, just use a syringe and squirt it into a proper bottle at the bottom, stick some tape over hole, and just use right amount. This plonker will flood your printer

[@TweakedSystems]

This is why I only use the EPSON Brand

[@VG-rj8pn]

Are you going to show putting the ink in it or you going to keep talking about the goddamn printer

[@Sulfen]

Damn lol learn to use the fast forward option