Tap to unmute

Epson ET 2750 - How To Clean Printhead - Printer Error Solved

  Рет қаралды 301,491

The Printer Guy

The Printer Guy

Күн бұрын

Пікірлер: 477
@BestPrinters
@BestPrinters 4 ай бұрын
Expedited Printer Support 👉 geni.us/BPChannelMember Printer Cleaning Kit - Get Yours Now & SAVE $! [CLICK THIS LINK] 👉 geni.us/wArXsZT Epson 502 Remanufactured INK [SAVE $] 👉 geni.us/O9Y0hO Epson Maintenance Box (Must Be Changed Routinely) 👉 geni.us/Z9yi
@junalvarado2806
@junalvarado2806 Жыл бұрын
These directions are so clear and simple to follow. After: 3 nozzle checks, 2 print-head cleanings, and 1 power cleaning --- my printer works again. Thank you so much for filming such clear instructions and for selling a reliable cleaning kit product.
@BestPrinters
@BestPrinters Жыл бұрын
Great to hear!
@popsshops
@popsshops 4 жыл бұрын
You say the cause of clogged nozzle is usually due to running the ink tank too low. For me that's not the case and I suspect my issue is infrequent use with ink drying in the nozzle tips. Do you agree?
@JohnSmith-un9fy
@JohnSmith-un9fy 4 жыл бұрын
This guy is just trying to sell ink and kits. Generally the head can dry out a bit or cheap ink can cause this issue as well.
@AKbushswatter
@AKbushswatter 4 жыл бұрын
Yes, my infrequent use causes the ink head to dry out, power cleaning usually works, but this may work if it doesn't.
@jeremyp8501
@jeremyp8501 3 жыл бұрын
@@JohnSmith-un9fy exactly lol 99 times out of 100 power cleaning works and even if it doesn't you can easily make your own fluid with a tiny bit of research.
@JackkBurtonn
@JackkBurtonn 3 жыл бұрын
@@jeremyp8501 so my et2750 doesnt have the power clean option so whats the way you guys power clean? Cause ill yake a tooth brush and some rubbing alcohol and scrub a dub lol
@veganriajones3812
@veganriajones3812 3 жыл бұрын
@@JackkBurtonn press the question mark and power button until the power cleaning option comes on
@drawingitout4673
@drawingitout4673 Жыл бұрын
This worked perfectly! My printer was basically printing blank pages. After using the kit, then doing 2 nozzle cleanings, and 1 power cleaning it worked. I was going to give up after nozzle cleanings but the power cleaning made the big difference. Thank you.
@pinkisenvy
@pinkisenvy 10 ай бұрын
4 years later and this was still very helpful!! !Thank you!!!
@BestPrinters
@BestPrinters 10 ай бұрын
Great to hear!
@amyleduccameron
@amyleduccameron 10 ай бұрын
THANK YOU! For me it was just about the first part of the video, with interrupting the nozzle check and then placing a paper towel to collect all the excess ink! Everything is clean now, and saved me a lot of frustration😌🙏🏻
@BestPrinters
@BestPrinters 10 ай бұрын
Glad it helped!
@TheClimbingNinja
@TheClimbingNinja 4 жыл бұрын
These directions were perfect! My magenta hadn't been working right for months and the cyan kept missing lines after performing the head cleaning and running a nozzle check. Using this product and following the directions in the video worked like a charm! Just make sure you do the power cleaning after cleaning the printer heads with the cleaning solution and run another nozzle check to ensure everything is printing properly.
@Jenn2004kuz
@Jenn2004kuz 4 жыл бұрын
Im having the same problems with magenta and cyan! Im going to try this!
@BestPrinters
@BestPrinters 2 жыл бұрын
Awesome! Yes it is important after using the cleaning kit, geni.us/wArXsZT , too run a power cleaning so that the ink is pushed into the system.
@AgreeWeCanDisagree
@AgreeWeCanDisagree Жыл бұрын
Mine just started with the magenta so I’m going to try this as well.
@loribishop6530
@loribishop6530 2 жыл бұрын
Thank-goodness for you and KZbin!! I tried other suggestions prior to buying the Printhead Cleaning Kit and Power Cleaning (which many said not to do). NOTHING worked until I did BOTH the Printhead Cleaning AND the POWER CLEANING! Everything is back to normal!! THANK YOU SO MUCH for your video!!
@BestPrinters
@BestPrinters 2 жыл бұрын
You are so welcome!!!!
@nblanchard1667
@nblanchard1667 10 ай бұрын
Same here. I was hitting a brick wall until using both to clear a blockage in the Black nozzle and Power Cleaning my way back to clear print.
@darronfick9894
@darronfick9894 4 жыл бұрын
Finally got around to using this product on the Cyan printhead. This did the trick. In my case the ink levels were still 2/3 full. I think it might be a good idea to print in full color periodically just to keep things moving.
@hurstma59
@hurstma59 4 жыл бұрын
My color ink wells are over 1/2 full.
@quatrax8691
@quatrax8691 4 жыл бұрын
You just need to do a Power clean. Hold the on/off button and the "?" Button. This guy is only trying to sell his stuff while it can easily be fixed
@BestPrinters
@BestPrinters 2 жыл бұрын
Absolutely, I am glad it worked for you!
@bowill2179
@bowill2179 2 жыл бұрын
@@quatrax8691 Did a power clean still doesn't work
@Sheltieshangrila
@Sheltieshangrila 2 жыл бұрын
@@quatrax8691 I did 2 power cleanings in addition to at least 5 print head cleanings and my black still wouldn't work until I used this product. While there's other cleaners on the market, his kit is set up for easy & immediate use. And with Amazon Prime, you can get it delivered same day. Your negative comment is completely undeserving b/c power cleanings don't work for everyone, as per lots of other comments on here.
@roxymccue1820
@roxymccue1820 2 жыл бұрын
I followed your tutorial to the T. It was informative and precise. When I was finished, I ran a head cleaning and nozzle check and my magenta lines were still missing. I read the comments down below and learned about Power Cleaning. So I did that. I'm not sure if it was the Power Cleaning that brought back the magenta lines or a combination of both methods, but I got all my colors back.
@BestPrinters
@BestPrinters 2 жыл бұрын
Great job!
@aneetabrown5814
@aneetabrown5814 3 жыл бұрын
I was getting white vertical lines through some of my text and followed Janice Carter's suggestion of a power cleaning. It worked! Thank you Janice. Good video.
@BestPrinters
@BestPrinters 2 жыл бұрын
Sorry I wasn’t able to get to you message. Please create a new comment with the same question if you still need a response. Thank you!
@emilysilver5369
@emilysilver5369 2 ай бұрын
Hi again, finally updating you on a separate comment per your request. I left wet (water) paper towels in the printer overnight as you suggested. It didn't loosen the black print head that I was struggling with, but I noticed a lot of blue ink on the paper towels in the morning. So I successfully flushed the blue, magenta, and yellow print heads. By the time I tackled black again, it had had a little soak time from the cleaning solution. I was able to push the syringe through and clean the black. It splattered all over me and the wall in the process, but it finally cleared. Unfortunately when I turned on the printer again I heard a pop and smelled a burning smell, and the display had an error message. My husband said it's time to just replace it😬
@BestPrinters
@BestPrinters 2 ай бұрын
So sorry to hear that, did you by chance allow 24 hour waiting. Before powering on after doing the cleaning?
@emilysilver5369
@emilysilver5369 2 ай бұрын
@@BestPrinters No I didn't.
@Kateandmykimmytheguineapig
@Kateandmykimmytheguineapig Жыл бұрын
Hi! Thanks for your video. I have a question; my 2760 doesn’t feed up the ink from the tank through the tube to the cartridge. I have full tank of ink but my cartridge is empty. How can I fix this issue?? Help me please
@K.G-u6r
@K.G-u6r 2 ай бұрын
I just used a cleaning solution to do this! I have an Epson ET-2800. Do I still need to do a print head cleaning on the printer after? Only my yellow is coming out now 🥴 before using the solution, all the colors were working but the nozzle check wasn’t good!
@BestPrinters
@BestPrinters 2 ай бұрын
Yes definitely
@donny2929
@donny2929 2 жыл бұрын
Perfect. Tried head cleaning and power cleaning but didn't work. My yellow was dead. Cleaned yellow, did test print and perfect. Blue had lines so did same to it....perfect. THANKS.
@BestPrinters
@BestPrinters 2 жыл бұрын
Awesome!
@sheepsfoot2
@sheepsfoot2 4 ай бұрын
Had to do this half doz times and several power cleans finally all 4 ink nozzles are unclogged and working 👍thankyou Brandon !
@BestPrinters
@BestPrinters 4 ай бұрын
Great to hear!
@sinisass
@sinisass Жыл бұрын
Thanks for the video. I have a question a friend lent me this printer but I can't lower the upper door, where is the release button?
@BestPrinters
@BestPrinters Жыл бұрын
You have to push it up before it unlocks and comes down.
@riyoun1
@riyoun1 4 жыл бұрын
This worked for me and I was happy with the purchase rather than buying a new printer at $300. I put in some suggestions for some things I learned and put them in my Amazon review for the product.
@BestPrinters
@BestPrinters 2 жыл бұрын
Awesome, thank you!
@coltonjohnson1681
@coltonjohnson1681 Жыл бұрын
Hi, what should I do if I have A LOT of resistance in the black color? I continued to run the fluid through the others just fine! Thank you for your help.
@coltonjohnson1681
@coltonjohnson1681 Жыл бұрын
Also, my towel keeps collecting black ink? But lots of resistance from the top part where I put the fluid in
@BestPrinters
@BestPrinters Жыл бұрын
Warm up the cleaning fluid before application.
@exquisitecandy2684
@exquisitecandy2684 3 ай бұрын
Hey Printer Guy- thank you. 😍Also, someone complained that you were only trying to sell printer kits. 4/5 rating(50 kits sold last 30 days) and 5,751 reviews so I wanted to call BS on that! Also hoping to let you know that when I click the kit link I get an error. If I click ok the page loads. Perhaps because I am in Canada. I am following you now. Appreciate you.
@BestPrinters
@BestPrinters 3 ай бұрын
Thank you for the info in this comment, I appreciate you!
@exquisitecandy2684
@exquisitecandy2684 3 ай бұрын
@@BestPrinters you saved my printer with the information on your videos. If things had really dried out, I would have happily purchased a kit. I did the cleaning etc a few times and it is perfect now. It sat too long.
@alioops8241
@alioops8241 2 ай бұрын
Hi I followed your instructions and now the 2 colours I cleaned dont print at all. What do you suggest?
@georgemob1
@georgemob1 5 күн бұрын
hi thanks for your video, i had a blank paper printing and after cleaning nozzles and power cleaning process it started printing but there are still lines shown in printing in other colours except black - @the printer guy: could you please help & advise ... thanks
@emilysilver5369
@emilysilver5369 4 ай бұрын
Hi, I'm using your kit and started with the black, as you did in your video, but I can't push the solution through even though I heated the solution on the stovetop in a glass jar placed in a waterbath, 3 separate times in succession. I'm exerting a lot of pressure trying to push the syringe, but it won't budge. Thanks.
@BestPrinters
@BestPrinters 4 ай бұрын
If you have used warmed up solution and it's still not budging, try leaving the syringe and silicone tubing attached to the nozzle and make the towel on the bottom moist and leave overnight. This may allow for things to loosen up for you to ultimately push solution through please respond in a separate comment if you have an update or would like to respond so I can be notified.
@billbaran1133
@billbaran1133 5 жыл бұрын
After using the cleaning solution. I ran through a "power cleaning". After the power cleaning everything works well. The cleaning solution worked well but I needed that final step.
@BestPrinters
@BestPrinters 5 жыл бұрын
Yes I just came to the same conclusion and added it to the description. Thank you for sharing.
@mariavarela1218
@mariavarela1218 2 жыл бұрын
Awesome video. Purchased the cleaning kit just ran the nozzle check and flushed the heads out. The color segments are not printing still. Only the black color. Any other suggestions?
@BestPrinters
@BestPrinters 2 жыл бұрын
You will need to run a power cleaning after running the kit.
@mariavarela1218
@mariavarela1218 2 жыл бұрын
:( I have an error message that I cannot bypass after I completed the cleaning kit instructions.
@neeceywithak5334
@neeceywithak5334 3 жыл бұрын
Thank you! This was very thorough and easy to watch. Others I’ve watched gave too much info. You were straight to the point. Ordering my kit today and I’m hoping this work.
@BestPrinters
@BestPrinters 2 жыл бұрын
Awesome and thanks for subscribing!
@juntjoonunya9216
@juntjoonunya9216 2 жыл бұрын
This usually works and has already for CM&Y but not K. I've run a couple ounces at least of isopropyl alcohol through to some paper towel underneath and it's still not printing but showing full ink on a new cartridge. Sounds like the printhead dead no? Or do I just keep going a few more rounds?
@BestPrinters
@BestPrinters 2 жыл бұрын
Keep on doing the cleaning a few more times and make sure you the power cleaning once you are done with the kit.
@TheApricotAgency
@TheApricotAgency 3 ай бұрын
My magenta doesn’t seem to be working…. But my 502 is also getting low. I k kw you’re selling a product and all but looking for an honest answer: maintain or replace? Do I buy more ink and flush clean the head or just buy a newer unit? Is there any maintenance to be done on the waste box?
@patappleby4832
@patappleby4832 2 жыл бұрын
Purchased your Cleaning Kit, it worked like a dream. Don't forget to do the power cleaning. Thanks
@nicholasnook-shelton1844
@nicholasnook-shelton1844 2 ай бұрын
Epson ET-2750 printer purchased 2021. Issues with printing. The instructions say to fill the ink, however the tank is indicating they are quite full. The colours work then don't work. We have tried flushing the print head - not a lot of luck. The black worked magnificently. The red was working then when a picture was printed there was no red. Could there be an issue with the ink? Could we add something to the ink in the tank? Not really sure what we can do. Have you any advice or further trouble shooting, please.
@fam.hubmer497
@fam.hubmer497 2 жыл бұрын
Sorry, I have a chestion, when the cleaning is finished the ink how it come to the printer head ? Because when I cleaning there is then cleaning water in the tube and no ink, when I am finished.
@BestPrinters
@BestPrinters 2 жыл бұрын
When you do a power cleaning it pushes all the ink into the system.
@fam.hubmer497
@fam.hubmer497 2 жыл бұрын
@@BestPrinters Thank you
@marykaupiko2223
@marykaupiko2223 5 ай бұрын
Can I use the cleaning kit for sublimation printing?
@federicozheng803
@federicozheng803 2 жыл бұрын
Hi! I did the steps from the video and also power-cleaned the printer. However, I noticed how all colors were used except for black while power cleaning. Does this mean there's an issue with my black ink in the ink tank? Also the inks have been there for at least 9 months, what should I do? THANK YOUU
@BestPrinters
@BestPrinters 2 жыл бұрын
Not necessarily, repeat the process until all the colors return though.
@ponymovie
@ponymovie 4 жыл бұрын
Worked perfectly, this is the second time in about a year that I used your cleaning kit. Thanks!
@BestPrinters
@BestPrinters 4 жыл бұрын
Glad to hear it worked for you!
@duanewilson3390
@duanewilson3390 4 жыл бұрын
I did this and I made 200 copies and my black ink isn't coming out
@ponymovie
@ponymovie 4 жыл бұрын
@@duanewilson3390 There was another suggestion to turn the printer off when not using it. Helps to keep from drying the ink out. After I used the kit and started turning the printer off...have had the best results doing that.
@abianeconciertos2319
@abianeconciertos2319 3 жыл бұрын
2nd time?! I hope this doesn’t become a regular occurrence.
@propsandpop
@propsandpop 7 ай бұрын
Now that the cartridge is empty how long does it to draw ink from the reservoir? Right now my black and cyan are blank
@BestPrinters
@BestPrinters 7 ай бұрын
it may need to go through a few manual cleaning cycles through the system before it's back to normal
@ummismail7229
@ummismail7229 7 ай бұрын
Hi there, is it normal that after doing your procedure my printer is printing blank sheets?? can you advise? Thanks!
@BestPrinters
@BestPrinters 7 ай бұрын
That is very normal after doing a power cleaning it will come back to standard printing
@blessedhomeschoolmess
@blessedhomeschoolmess 2 жыл бұрын
What if when you did your maintenance checks and literally no ink prints ? I was getting vertical lines prior and at times just blotches on the paper. Would I use the same method?
@NancyFerguson-i2s
@NancyFerguson-i2s Жыл бұрын
UPDATE: I did a "power cleaning" and that fixed my problem. I probably didn't need to order and perform the cleaning with the Printhead Cleaning Kit. Followed directions after ordering the cleaner. It's the magenta that is causing my problems. Ran multiple head cleaning and nozzle check after cleaning, still no magenta showing up on the nozzle check printout. Any suggestions?
@BestPrinters
@BestPrinters Жыл бұрын
Make sure Magenta is totally full and run another power cleaning.
@kathaleenbrewer9559
@kathaleenbrewer9559 2 жыл бұрын
I have the Epson ET-2720 and the top glass does not lift up so I can't get to the print nozzles. All the colors stopped working. Is there any way to fix this printer?
@BestPrinters
@BestPrinters 2 жыл бұрын
Yes you will need to remove the screws around the glass scanner to reach the printhead.
@dianarobles5926
@dianarobles5926 10 ай бұрын
Hello, I've replaced the ink and cleaned the ink cartridges and printhead. I did the nozzle check, print head cleaning and power cleaning and nothing has worked. The horizontal printing isn't working well and when I print out the sheet all the segments are spaced apart none touch at all or overlap. Idk what else to try. If you can please put some input on what else i can do. Thank you.
@BestPrinters
@BestPrinters 9 ай бұрын
You will need to repeat the cleaning process again and you may need to also warm up the fluid over boiling water, and reapply warmed up solution.
@JamesRitter-q5u
@JamesRitter-q5u 11 ай бұрын
Followed the instructions. The next day tried to run the nozzel check but suddenly the printer went off and I can't get it back on - seem like it died. Pulled plug and replaced but still nothing. Although I took steps to make sure it was dry, not sure if it shorted due to the solution? Anything I can do to save the printer or is it a goner?
@BestPrinters
@BestPrinters 11 ай бұрын
If you didnt allow 24 hours to dry it may have shorted. Now you should wait another 24 hours before trying to power on again.
@JamesRitter-q5u
@JamesRitter-q5u 11 ай бұрын
The printer still won't turn on. I appreciate you offering a solution to fix the ink blockage but you should be more clear that this could also completely brick your printer. Although it has been proven to work, perhaps this isn't the best approach for trying to fix given failure results in hundreds of dollars wasted.@@BestPrinters
@marthabernal1098
@marthabernal1098 2 жыл бұрын
Where can I buy a extra empty cartridge for my ink. The pink cartridge nozzle broke right were the tube connects
@BestPrinters
@BestPrinters 2 жыл бұрын
You will have to look up the replacement part. Maybe on eBay.
@Sheltieshangrila
@Sheltieshangrila 2 жыл бұрын
Just purchased the cleaning kit. So thankful it's available for same day delivery via Prime. Hoping this works because my ET-2750 is only 4 years old and I've only printed 189 times with it according to the print counter. I've done a print head cleaning at least 5 times now along with 2 power cleanings but the black will still only print with a very faint outline of fonts. It won't print at all on a nozzle check or alignment. I've spent way too much time on it now so this is my final attempt at fixing it before I throw in the towel and buy a new printer, which won't be an Epson.
@BestPrinters
@BestPrinters 2 жыл бұрын
Best of luck, please feel free to reach out via Amazon messaging if you have any questions or concerns.
@Sheltieshangrila
@Sheltieshangrila 2 жыл бұрын
@@BestPrinters I just finished and it worked like a charm! The only nit I have is the instructions could have been a little better... such as what all the accessories are for and the best way to heat & fill the syringe (ie: heat a mug of water in microwave for 1 minute then let bottle sit in mug for a few minutes & then to fill the syringe, feed plastic tubing into bottle to suck up fluid). Fortunately I rescue squirrels so am familiar with syringe feeding & food warming, but people who aren't might have issues, especially if they're elderly. I'm very happy with the results and your video gave excellent guidance. Just gave you a 5-star rating on Amazon. Thanks so much!
@BestPrinters
@BestPrinters 2 жыл бұрын
Thank for that feedback! I am glad you were able to manage and get your printhead cleaned. Also thank you for the review, that really helps! Have a great day!
@Sheltieshangrila
@Sheltieshangrila 2 жыл бұрын
@@BestPrinters FYI that I just sent you a support question via Amazon regarding an issue that developed...
@christinabigelow7970
@christinabigelow7970 2 жыл бұрын
Hi Best Printers, Have you ever used this product with an Epson ET-2550-? I am able to clean printer head but not the lines.. and I may need more color ink but I have black and only need black at this time. Can you help? Thank you... or should I just save time and buy an HP jet printer? TY
@BestPrinters
@BestPrinters 2 жыл бұрын
SO the printhead is the only thing you really need to clean. After doing the cleaning run a power cleaning. You should have full quality once you complete those two things.
@hayleygomes3844
@hayleygomes3844 2 жыл бұрын
After following the first steps and taking the screw off, I then had to put it all back because it wasn't forewarned that we had to buy a kit to follow it. Might be helpful to have had this warning early on!
@BestPrinters
@BestPrinters 2 жыл бұрын
Ok, thank you for your feedback.
@DarEyezKnight
@DarEyezKnight Жыл бұрын
i did used print head cleaning but needle still hard to press and not full yet. Looks like under hole blocks?
@BestPrinters
@BestPrinters Жыл бұрын
If you remove the plastic cartridges you can clean the nozzles directly.
@weijiechin5483
@weijiechin5483 2 жыл бұрын
Hi, great video! I bought the solution and follow what you have thought. The black ink went well however I face a lot of resistance with the color inks even after flushing it twice on the yellow one, don’t have enough solution to flush twice for the other 2 colors. Ithe colors still did not come out on after nozzle check Appreciate advise. Thanks
@BestPrinters
@BestPrinters 2 жыл бұрын
Hi, just run power cleaning until the color returns.
@harmonydawnretreatcentre349
@harmonydawnretreatcentre349 Жыл бұрын
Help- my printer head does not move like yours. Turned off it is to the very right of the printer and I feel it will break if I force it. I got the screw out but it wont open up. How to move it to the middle? I have tried to turn it on and see if i can get it to stop in the middle but it always goes to the right. Any tips would help.
@BestPrinters
@BestPrinters Жыл бұрын
Print anything and while it is printing unplug the printer. I know it sounds crazy but I have done it with no problems many many times. Its the best way to get it done.
@harmonydawnretreatcentre349
@harmonydawnretreatcentre349 Жыл бұрын
@@BestPrinters i wondered about that. will try right now. Thx for the tip will let you know..
@harmonydawnretreatcentre349
@harmonydawnretreatcentre349 Жыл бұрын
Hi, i was able to clean it out as per video and it still doesnt print magenta. Any ideas?
@marvelousrazwa
@marvelousrazwa 2 жыл бұрын
Hey I got a question…I accidentally set up my brand new ET2750 I load couple of the inks and I forgot to load up the black and the yellow… but I filled them afterwards, but it doesn’t give me an options to charge the black and the yellow… eventhough I reset the ink the black and the yellow still not printing or showing… what should I do ??
@BestPrinters
@BestPrinters 2 жыл бұрын
In the settings there should be an option to charge the ink after set up.
@medusa569
@medusa569 3 жыл бұрын
How did you get the top lid to flip all the way back for access?? Mine doesn't go back that far.
@dillorado
@dillorado 3 жыл бұрын
Keep pushing it back gently. It gets stuck a bit.
@medusa569
@medusa569 3 жыл бұрын
@@dillorado I\ll give it a try again...I would up just taking the top off from the left side
@loricordeiro9549
@loricordeiro9549 6 ай бұрын
How long does it take to have all your colors print?
@BestPrinters
@BestPrinters 6 ай бұрын
It really depends.
@petertran5419
@petertran5419 Жыл бұрын
I cannot push the syringe down. The pressure build up in the ink tank is not allowing it. In other words I can't push any fluid through. What do I need to do l?
@BestPrinters
@BestPrinters 10 ай бұрын
Warm up the cleaning solution.
@lydiabutler606
@lydiabutler606 5 ай бұрын
If everything is coming out just a blue color will I need 4 kits to clear out the each color.
@BestPrinters
@BestPrinters 5 ай бұрын
That's normal. You only need one kit maybe one additional if you need more solution.
@manpreetsinghlic
@manpreetsinghlic 2 жыл бұрын
Hey. So i did this now its not sucking any new ink from tank. What after the video how will the ink return in the cartridge head as its all flushed with clean solution
@BestPrinters
@BestPrinters 2 жыл бұрын
Use the power cleaning function.
@TimSupovitz
@TimSupovitz Ай бұрын
Thank you for making life a little bit easier...
@BestPrinters
@BestPrinters Ай бұрын
Any time!
@paulagonzalez7264
@paulagonzalez7264 2 жыл бұрын
Directions were great followed them to the T. But I am now having issues with the one that I cleaned. The cartridge will not refill again. Any tips on correcting that?
@BestPrinters
@BestPrinters 2 жыл бұрын
Yes run a power cleaning after using the kit.
@andracollett5088
@andracollett5088 2 жыл бұрын
started out yellow and cyan not working. used the kit and nothing prints, used the kit again the next day and black and magenta print but very faint. My tanks are all full and never below half. Any other suggestions?
@BestPrinters
@BestPrinters 2 жыл бұрын
Yes, run a power cleaning always after using the kit.
@andracollett5088
@andracollett5088 2 жыл бұрын
Tried that and only black prints. All ink is full
@paigemcdonald2063
@paigemcdonald2063 5 жыл бұрын
Can you tell me how to get the printer to go through the initialization process again where it will charge the ink?
@JonBrahh
@JonBrahh 4 жыл бұрын
Amen, havent been able to find this info for months...
@BestPrinters
@BestPrinters 2 жыл бұрын
Yes run a power cleaning.
@rbrutout58
@rbrutout58 Жыл бұрын
Hey buddy, I flushed all of my print heads and did all the steps you recommended but it is barely printing the colors, they are real light. At least the black used to work but now it barely prints too. Can you tell me what I did wrong? Thanks!
@BestPrinters
@BestPrinters Жыл бұрын
Ok, so now you need to run a power cleaning and you should be all set.
@rbrutout58
@rbrutout58 Жыл бұрын
Thank you brother, my printer works like new! You saved me $150.@@BestPrinters
@qjarman7753
@qjarman7753 Жыл бұрын
Hi… thanks for posting this. I followed your tutorial and it work great except now my prints and very feint/wishy washy… like the ink has been diluted… any advice please 🙏
@BestPrinters
@BestPrinters Жыл бұрын
Repeat the process with the kit and also run a power cleaning.
@Labrow76
@Labrow76 Жыл бұрын
Will this work with sublimation ink also?
@BestPrinters
@BestPrinters Жыл бұрын
Absolutely.
@Shanie1126
@Shanie1126 6 ай бұрын
I just ordered the cleaning kit because two of my colours are not coming out well and one not at all. I was just wondering should I fill my ink before cleaning? My ink levels are half full or more on all. I have done head cleaning and a power clean and left off for 24hrs then I did it again but still not working, hence why I ordered your cleaner. Please advise I just want to know if it would be best to fill ink first. Thanks
@uniefresh420
@uniefresh420 2 жыл бұрын
I had a black clip fall off when I was putting the paper towel on and was curious if you had a pic or video so I can put it back on thank you
@paulabodkin244
@paulabodkin244 Жыл бұрын
I had filled the ink wells and then found that the colours were faint. By flushing/cleaning as per your video do i lose all the ink that was in the wells?
@BestPrinters
@BestPrinters Жыл бұрын
Yes
@shaunatower3864
@shaunatower3864 2 жыл бұрын
Hoping you get this and have an Idea...Bought your solution and flushed everything. Everything flowing well and even pulled ink back into the print head cartridges. All colors are not printing at all!! It's like its not pulling the ink out of the tanks. There is ink from tank to nozzle but not to paper.....any ideas?
@BestPrinters
@BestPrinters 2 жыл бұрын
Now you will need to run a power cleaning. That will push the ink back into the system.
@TahoeKellys
@TahoeKellys Жыл бұрын
What is in the fluid, please? Is that something we can replace ourselves?
@islandaloha
@islandaloha Жыл бұрын
How did you center the printhead? When you power off the printer, the print head automatically moves to the right hand side and the printer locks it there.
@w0lf27
@w0lf27 2 жыл бұрын
So i left mine in the closet for 2 years, Pulled it out used this cleaning solution. IT fixed all colors except black. The cartridge that the tube pushes the ink into will not fill and print. I have checked the tube it is not clogged. Any thoughts?
@BestPrinters
@BestPrinters 2 жыл бұрын
You can also remove the cartridge and clean the nozzle at the bottom of the printhead. That should do it. Please refer to this updated video, kzbin.info/www/bejne/q3-TkHyeiLGprNk
@w0lf27
@w0lf27 2 жыл бұрын
@@BestPrinters Its no longer clogged, its not sucking ink from the ink bay. and i know thats not clogged cause i used the syringe to and pushed air and it bubbled the ink.
@w0lf27
@w0lf27 2 жыл бұрын
i can put the ink bottle in the top and squeeze and Ink will flow but thats it and still wont print or pull ink from the ink bay
@fablejournals4142
@fablejournals4142 Жыл бұрын
Have you changed your cleaning kit? I clicked on the direct link in your video and was taken to Amazon which showed Best Printers cleaning kit. I was sent a generic version with parts that clearly do not fit each other.
@BestPrinters
@BestPrinters Жыл бұрын
All the parts fit.
@fablejournals4142
@fablejournals4142 Жыл бұрын
@Best Printers I may not have made myself clear. The kit I was sent did not say anywhere on it Best Printers. There was only one adapter that definitely did not fit the tube (it was way too small). I'm wondering if your original kit has been changed? Amazon claimed it was the correct kit. Looking back at the transaction, even though I clicked on the link provided here (it did take me to Best Printers kit) it was not Amazon or Best Printers who sent it. There was a 3rd party. I'm trying to figure out if this is supposed to be the kit you are selling or if the issue is on Amazon's side. I've ordered 2 and sent back 2. They do not resemble the kit you describe in your video or on your website.
@jessicaleroy1296
@jessicaleroy1296 4 ай бұрын
Hey, am I supposed to do a power clean or something after doing this because now that I have flushed the blue, I’m getting no blue at all :/
@kentdavis7787
@kentdavis7787 2 жыл бұрын
after going through this procedure, none of the colors work, the tanks have never been below 3/4 full. wondering if the clog is somewhere before the cartridge
@BestPrinters
@BestPrinters 2 жыл бұрын
It is more likely in the actual printhead.
@kentdavis7787
@kentdavis7787 2 жыл бұрын
@@BestPrinters so do you think I should run more solvent through the cartridges or the actual printhead? I was wondering too if a clog in the cartridge wasnt allowing for ink to by siphoned into the cartridge, I ordered new cartridges to see if that would help.
@sueannreeder6231
@sueannreeder6231 3 жыл бұрын
I have an issue in that my black ink will simply not go into the reservoir! It's been fine before, now I turn it upside down & it will not drip into the tank. I have the Epson ET-2750. Any help will be appreciated, thanks!!
@BestPrinters
@BestPrinters 2 жыл бұрын
Run a power cleaning.
@livingmytruth90
@livingmytruth90 2 жыл бұрын
Great tutorial! my only question is- once you're finished, do you run a nozzle check or do you need to clean the printer head after? Like what's the follow up afterwards? TIA
@BestPrinters
@BestPrinters 2 жыл бұрын
Yes you will need to run a printhead cleaning until the color returns.
@livingmytruth90
@livingmytruth90 2 жыл бұрын
@@BestPrinters ok thanks so much! Im waiting for the kit. Fingers crossed it works! 🤞
@b.d.enflooence92
@b.d.enflooence92 2 жыл бұрын
how do you keep the lid from coming back down?
@BestPrinters
@BestPrinters 2 жыл бұрын
It should do it automatically if not put a pen or something similar to wedge it open.
@b.d.enflooence92
@b.d.enflooence92 2 жыл бұрын
@@BestPrinters I got it. I was worried about lifting too far(didn't want to break it). But you hit a point of resistance, then just lift a little farther and it locked itself in an open position. Used the kit you have, and after a power cleaning it works fine again. Thanks for the help with your video
@paulrice801
@paulrice801 4 жыл бұрын
My ET 2750 has lost all colour (test page only shows the black...zero on colour)... is it likely all 3 have gone at the same time, or possibly another issue?
@tattoomike84
@tattoomike84 3 жыл бұрын
Did u ever figure this out? I have the same issue rit now
@paulrice801
@paulrice801 3 жыл бұрын
@@tattoomike84 Hi Mike - See Janice Carter's reply below.. took two goes for me, but did work after the second attempt and has been fine since.....
@BestPrinters
@BestPrinters 2 жыл бұрын
Yes that can happen, use the method in this video to fix that.
@samanthacarney283
@samanthacarney283 Жыл бұрын
I cleaned my rosin et 2750 and error message came up reading the 031006. Are you familiar with this
@BestPrinters
@BestPrinters Жыл бұрын
Try resetting the printer.
@irenegill4573
@irenegill4573 2 ай бұрын
I have an Epson WF-2750. I have tried cleaning the nozzles multiple times, all I get are faint magenta lines and low ink warnings even though I have replaced ALL the inks with new. I am so frustrated. Will this work with my printer (if it works)?? I looked at the product on Amazon, I don't see my printer listed. :(
@biggestbattles
@biggestbattles 2 жыл бұрын
Thanks! I used your kit to clean all four colors. I thought the printer was toast. A little messy though, so be sure to use latex gloves. At first the printer wouldn't print at all, but after leaving it sitting for 24 hours, the printing miraculously started to work (faintly), but two print head cleaning cycles from the Epson printer interface cleared everything up and it's all good!
@BestPrinters
@BestPrinters 2 жыл бұрын
Great to hear!
@cherylwalker5620
@cherylwalker5620 4 жыл бұрын
Nothing clogged but when I print an image it has like these lines through the picture. What is the cause of that? Any suggestions
@cherylwalker5620
@cherylwalker5620 4 жыл бұрын
Also mind you this is a brand new printer
@roslynthomas8871
@roslynthomas8871 4 жыл бұрын
Mine is doing the same thing. Tried this and I still have lines...
@cherylwalker5620
@cherylwalker5620 4 жыл бұрын
Trying to understand why. But everytime I do a cleaing from the maintenance button it stops until about like the 4th or 5th print then I have to do that all over again🤔🤦‍♀️
@BestPrinters
@BestPrinters 2 жыл бұрын
Try using the method in this video.
@sar8349
@sar8349 Жыл бұрын
How do I lift the top to get to the printhead?
@BestPrinters
@BestPrinters Жыл бұрын
Tabs on the sides
@YEGOuellet
@YEGOuellet 3 жыл бұрын
Cleaning went well. I cleaned all the four inks. Although it started to work with anemic results, as I printed, the ink almost completely disappeared. It seems that the ink is not coming to the print head. What can I do to fix this? Tks
@BestPrinters
@BestPrinters 2 жыл бұрын
Hermes, is correct.
@kathycastrataro1685
@kathycastrataro1685 9 ай бұрын
I was getting the colors but no black printing. I tried head cleaning and it didn't help. I tried using the kit to flush the black, and when pushing slowly on the syringe, the tube popped off and I got black ink everywhere. Any other suggestions?
@BestPrinters
@BestPrinters 9 ай бұрын
You will need to warm up the solution and reapply. Gently steady pressure will eventually allow for the blockage to break and you'll be able to clean the printhead.
@AliceRitchie-n8y
@AliceRitchie-n8y Жыл бұрын
Will the cleaning kit work with an Epson 2720. Also my problem seems to have occurred when I overfilled the magneta and now I can only print back or pink. Any suggestions?
@BestPrinters
@BestPrinters Жыл бұрын
The cleaner should help.
@psuehiro
@psuehiro Жыл бұрын
so I hoped to be successful like those below. Seems I am not so lucky. My printer had the yellow segments broken, and after a few power cleans the yellow was completely gone. I did the nozzle clean (yellow only). Ran 3 nozzle checks and two power cleans. Some prints came out with splotches of yellow or black on the paper and still no yellow segment. During the 3rd power clean my printer shut off. When restarted the display shows "E-01, Printer error. Contact Epson Support. Non-printing features are available. 031006" and then "turn off"...Can you please advise? I will attempt to contact support for next steps.
@psuehiro
@psuehiro Жыл бұрын
also my printer smells funny...almost like a burning smell.
@BestPrinters
@BestPrinters Жыл бұрын
It seems that the printer may be taking the cleaning poorly. I would suggest, getting a technician involved and let it sit powered off for 48 hours.
@elizabethjackson8333
@elizabethjackson8333 4 жыл бұрын
I have this model of printer, and it just started printing heavy on the 'magenta'. After performing the 'clean print head' function, it would print only black. So I took your advice and bought the cleaning kit. Everything went smoothly, the fluid flowed through easily and any clogged ink flushed out. Yet although there is plenty of ink, it doesn't print at all! The error message "Non-printing available. Contact Epson" Odd way to phrase it....I would have thought, "Printing not available". Now I'm stuck. Any advice? How do I get a refund on the cleaning kit, since it's made matters worse?!
@BestPrinters
@BestPrinters 4 жыл бұрын
Hi Elizabeth, so one thing you can try is running something called a power cleaning after using the kit. Do that a few times as required. If this does not work please message Best Printers via Amazon and I will provide you with a refund.
@elizabethjackson8333
@elizabethjackson8333 4 жыл бұрын
Elizabeth Jackson I did a couple of things; I ran the power cleaning as suggested and although the test print showed in the print queue, it still didn't print. The error message returned: Contact Epson Support (although 'cos of COVID, they aren't answering). So I reinstalled the drivers and tried changing the ports (changed them back). No luck unfortunately. Diagnostics say there's nothing wrong, but I can't get anything to print at all. The printer is useless :-(
@lissaw1334
@lissaw1334 Жыл бұрын
I did this cleaning with this product and now have the same error message and a smoky smell to boot
@saidagarcia75
@saidagarcia75 Жыл бұрын
Help please with my epson et-2750. My cayan is printing green. I've done head cleaning & power clean. What els can I do
@guillermosilva5089
@guillermosilva5089 4 жыл бұрын
Can I change the ink to sublimation ink on this epson
@BestPrinters
@BestPrinters 2 жыл бұрын
Yes, but you have to flush out the old ink.
@vispibyramji8262
@vispibyramji8262 2 жыл бұрын
After following the video my printer has now stopped working. It's giving me an error message saying 'Contact Espon Support. Non printing features are available'. Any suggestions?
@BestPrinters
@BestPrinters 2 жыл бұрын
Try reseting the code, by powering off unplugging and leaving of for a minute. Then power it back on.
@magsmorgan2914
@magsmorgan2914 4 жыл бұрын
I just used this after having dry printer heads and it worked perfectly.
@duanewilson3390
@duanewilson3390 4 жыл бұрын
I did this and I so far printed 200 pieces of paper and I still don't have any black ink coming out
@magsmorgan2914
@magsmorgan2914 4 жыл бұрын
Well, most recently, I’ve had printer problems and tried to clean again but can’t get the colors to print. I’m buying a new printer and not the Epson
@BestPrinters
@BestPrinters 2 жыл бұрын
I am so glad to hear that!
@brianfindsall
@brianfindsall 2 жыл бұрын
where does all this fluid go ? does,nt it flood the bottom of the printer unit.
@BestPrinters
@BestPrinters 2 жыл бұрын
It is soaked up by the paper towel you place at the bottom.
@JustNow42
@JustNow42 Жыл бұрын
Many ET-2750 has a software fault that prevent the operation of power cleaning ( and normal start) , I found that just tilting the printer in all directions , one after the other, up to about 60-70 degrees had an excellent cleaning effect. The printer became as good as new. Epson suggest to get the software fixed but it is too expensive my service center says.
@muffyclarkgill6642
@muffyclarkgill6642 Жыл бұрын
I flushed the tanks as per your instructions. I had a hard time putting the printer back together again. I tried to do a nozzle check again. Now I keep getting this message saying scanner error and invalid. Turn off computer. Can you help me please?
@BestPrinters
@BestPrinters Жыл бұрын
You need to reset the printer. Start off by leaving it unplugged for 24 hrs.
@Marc1618
@Marc1618 4 ай бұрын
What if after i used the cleaning solution then power cleaned, then head cleaned, then nozzle checked and no ink came out, and then after trying again for a nozzle clean it gave me an error message, and now every time i turn it on it just goes straight to error message. Do i have to wait 12 hours before it does something? Maybe another power clean might help? Just dunno how to get around the error msg now
@khalidsyed5028
@khalidsyed5028 2 жыл бұрын
Hi, I just saw your video. A very good attempt to help people. I want to ask you if you could help me fix my printer problem please. It is printing haphazardly in portions of the page.
@BestPrinters
@BestPrinters 2 жыл бұрын
Hi! Yes you will need to do this cleaning.
@coachjedijason
@coachjedijason 2 жыл бұрын
Are you no longer selling this kit. It shows unavailable on Amazon.
@BestPrinters
@BestPrinters 2 жыл бұрын
Thanks for letting me know, here is the new link: geni.us/wArXsZT
@montsinya
@montsinya 2 жыл бұрын
It did work for me. It went from not printing at all to printing perfectly well, but I had to do a power clean.
@BestPrinters
@BestPrinters 2 жыл бұрын
Glad to hear that!
@brandonm4319
@brandonm4319 2 жыл бұрын
How do i charge the cartridge since its been emptied of ink and full of the cleaning solution?
@BestPrinters
@BestPrinters 2 жыл бұрын
Run a power cleaning.
@blkicemike4857
@blkicemike4857 2 жыл бұрын
When I do nozzle check ,. The page is blank,.. the tanks have ink in them all 3/4way full,..
@BestPrinters
@BestPrinters 2 жыл бұрын
This method should help then.
@blkicemike4857
@blkicemike4857 2 жыл бұрын
@@BestPrinters I flushed the printer head,. Also checked all the lines ink flows thru ,all the removable tanks on top print head seemed to not be getting ink so I primed them,. STILL NOTHING, BLANK PAGE,. Any suggestions?? Occasionally was getting faint pics when I'd print but after flushing ,. Now getting blank page! I may have totally phuaqt'up my printer??
@SashaSky-l8x
@SashaSky-l8x Жыл бұрын
What happens if you can't push the cleaning solution through, even gently?
@BestPrinters
@BestPrinters Жыл бұрын
Then you will need to warm up the solution.
@PepsiManX360
@PepsiManX360 2 жыл бұрын
I ordered one of these kits from Amazon, but sadly FedEx lost it in transit (as usual). Hopefully they find it and send it to me for my older Brother printer.
@BestPrinters
@BestPrinters 2 жыл бұрын
Hey man message me directly, click on Best Printers on my listing page and I will get you a replacement.
Sigma Kid Mistake #funny #sigma
00:17
CRAZY GREAPA
Рет қаралды 30 МЛН
It’s all not real
00:15
V.A. show / Магика
Рет қаралды 20 МЛН
Epson WF 2750 - Won’t print black- printer error fixed
10:57
The Printer Guy
Рет қаралды 206 М.
Print Head Clogs   What to do!
17:21
Jose Rodriguez Photo Printing Techie
Рет қаралды 839 М.
EPSON ecoTank / Manual cleaning injectors  *4K
5:00
Javiery70
Рет қаралды 1,4 МЛН
Epson ET 2720 Printhead Cleaning & Repairing For Clogged Ink !!
10:48
Copy Print Scan
Рет қаралды 33 М.
Printer Ink, It's a SCAM
6:17
Fstoppers
Рет қаралды 8 МЛН