Frameless Door Jamb Solution | EZ Concepts EzyJamb

Installing EZ Concepts hidden door jamb system. Perfect for creating seamless clean lines, and eliminating the need for trims/casing around the door frame.
Trim-less is all the rage right now. We probably don’t need to tell you that, but it’s true. Eliminating trims (casings, baseboards etc.) can transform your home into an ultra modern, minimalist, stylish space that looks as though you spent a fortune on interior designers, decorators and stylists. Client after client requesting interior doors and windows without casing might not SEEM like a big deal, but as an installer, let us tell you… it is. That’s why we’ve been on the lookout for an elegant solution to a major construction dilemma; how to transition from drywall to a door/window in a way that both functions well, looks great, and lasts forever (or at least a really long time).
Enter ‪@ezconcept‬ . They’ve created an all-in-one solution to all of these problems, in a straightforward, easy to install kit- the EzyJamb. Made from galvanized steel, their jambs are designed to be integrated seamlessly into the existing drywall. Simply connect the three jamb pieces, align them properly then add screws, tape and a few coats of drywall compound. Done! When installed correctly, using the RocYork hinges offered on their site, the door will sit perfectly flush with the walls, and is capable of opening to full 180º (a nice little bonus).
For more information on the EzyJamb or any of EZ concepts products (as well as more detailed specs and installation guides) check them out here 👇
ezconcept.com/...
🚨 Looking for more from the Refresh guys? Don’t forget to subscribe to our channel 👉 / @refreshhomeimprovements or follow the links below for more DIY-friendly home renovation tips, as well as tons of satisfying, easy to watch videos on our other social media pages!
www.instagram....
www.tiktok.com...
/ refreshhomeimprovement...
www.refreshhome...

[@Khurr]

Bro…in the process of reaching the edge after 15 years of dealing with shitty to mediocre contractors. I finally blew a lid (in the middle of a project now) and decided to always show appreciation for a contractor who has finesse and clearly cares about their craft and the material to achieve great final results. This was awesome to watch, learn, and appreciate t your process. Thanks for sharing cos caring and skillful craftsmen are rare today. Much appreciated.

[@RefreshHomeImprovements]

👊😉

[@Contemplative_extrovert]

I love the clean look of frameles openings. Especially deep set windows.

[@c50ge]

Pica-Dry pencil! I have used one for the last year. Will never use any other pencils . Also purchased white”leads” for when I fabricate metal.

[@RefreshHomeImprovements]

Thanks for sharing!

[@armangrigoryan979]

Hi great video just wanted to see if you have done an install but with a 1” reveal between the floor and the wall for a modern look?

[@RefreshHomeImprovements]

We haven’t, but we love that idea 👍❤️

[@DumbCarGuy]

I did notice that there aren't any provisions for a strike plate to be mounted to the jamb for a door handle. I can see this working with just bars for handles as long as it doesn't require a locking mechanism. So if you do a lock, do you just have to add an external mounting lock like for a bathroom or bedroom

[@PatrimonyPainting]

Great video! Does anyone know what is this "all in one " door jamb concept that doesn't have traditional "door stop " called ?

[@forwox]

I have installed frameless door already in apartment and door is mounted. Do I need to remove the door better to do the compounding, sanding, painting the wall?

[@bmolley]

I want to know one thing, did you gave issues getting the outer hinge screw to hit something solid? Meaning was that screw into the drywall and not the stud?

[@welkinator]

I watched this but how do you get one? I tried the web site but that's for contractors. I have a hallway "french" door (two doors - close in the middle) that I would like hidden hinges on.

[@RefreshHomeImprovements]

It can be tricky, we understand. Reach out to them and they’ll find you a supplier👍

[@mayrarodrigues6913]

Is it possible to do it without those steel structures. I don’t have it where I live but I want those doors so badly.

[@sensequest]

i just took off my trim and taped and mudded the edge of the drywall over to the door frame

[@weiwang1967]

What is the wall is not even and some part (let's say bottom part for example) needs to be stacked 1/4 or 1/2 inch?

[@RefreshHomeImprovements]

To be completely honest, we wouldn’t recommend installing a system like this on a wall/frame that is severely out of plumb. The fact that there is no casing means that you have very little room for error, or to hide imperfections when it’s finished. Hope that helps

[@talkingshadow]

Could this be installed on brick walls?

[@Steven-xy8rg]

Looks like this would work fine in a new framing application with drywall for my bosses want me to put one in an existing old house with plaster and lath and wainscot on the other side looks like I'm in for a real challenge

[@sergiyomelayenko1497]

Can you install it on metal studs in condo?

[@RefreshHomeImprovements]

This particular model requires the hinges to be routed into the framing which would be difficult with metal studs (not impossible though). Aside from that, we dont see any reason it wouldn’t 🤔. It might be worth reaching out to EZ concepts and asking which of their products they would recommend for your situation before purchasing anything (they’re not cheap, so you’d want to be sure 👍). Hope that helps

[@xiaoliu9160]

Really nice, thanks so much for sharing! Are you guys located in Los Angeles?

[@RefreshHomeImprovements]

No we are in Toronto👍

[@bobbysharifan4327]

How would this system work with flush baseboard installation?

[@RefreshHomeImprovements]

It’s very complicated, but it can work with some creativity and hard work👍

[@armangrigoryan979]

Did you install after flooring or before flooring ?

[@italiadyer8841]

How much it cost to only install a door like that one a dayaris door?

[@RefreshHomeImprovements]

This would be expensive 👍

[@skindawg3615]

WOW nice this guys. ive done similar but with plaster.

[@RefreshHomeImprovements]

Very cool!

[@stelios709]

Great product, but outrageously priced here in the UK.

[@RefreshHomeImprovements]

They certainly aren’t inexpensive here either- but it is a great product 🤷

[@taylorwaguespack6218]

What brand door was used?

[@RefreshHomeImprovements]

Just a generic solid core slab door from Brenlo here in Toronto

[@sterlingsimmons953]

How much does the frame cost ?

[@greentimberoman9258]

These are only applicable for drywall?

[@miles5600]

is what exactly?

[@RefreshHomeImprovements]

No, not necessarily!

[@misteebrowning7481]

What does the door look like on the other side?

[@RefreshHomeImprovements]

It depends how you finish your walls- but for simplicity’s sake, it looks exactly the same as the front, with a slightly deeper jamb 👍

[@sandrashand1498]

Can we get them in New Zealand

[@PlayerPhill]

Does it come with built-in door stop? If not, I'm out!!

[@RefreshHomeImprovements]

Yes, it’s all apart of the jamb👍

[@chriss31]

How much for the whole kit? Like door, hinges, jam?

[@RefreshHomeImprovements]

It’s hard to say because there are a LOT of variables that can change the price dramatically (thats why they don’t list price and ask that you request a quote from them). We can tell you that it’s not cheap 😂.

[@stretchinghabits]

Found it!

[@RefreshHomeImprovements]

👍

[@Saint-lw7mh]

But…how does a hinge work!!lol

[@tylersierra25]

Let’s see what yall can do with French doors

[@greghight954]

Funny how all the minimalist designs require more money and more skill to do.

[@RefreshHomeImprovements]

😂👍

[@greghight954]

@@RefreshHomeImprovements at least most of them can be changed easy enough with trim when it goes out of style.

[@chippysteve4524]

Hi. 21st century here. Somebody didn't get the memo. Perhaps the only way to make a doorframe less sustainable would be to make it out of whale bones and cobalt and ship it from Australia.Definitely a step in the wrong direction. Quite amusing that the opening was sized to fit a standard door size but then had to trim and refinish the door anyway because the metal gimmickry had not been taken into account. It is a good way to force people into buying OTT hinges at crazy prices.

[@jodyleigh8258]

Painting metal jambs? Nope

[@salmangino2230]

How can a true carpenter work with gloves, I have been a carpenter for over 50 yrs , real woodworkers do not wear gloves

[@europeanbrows]

love the personality in this tutorial. 🫶🏼 ty for being informative and entertaining.

[@RefreshHomeImprovements]

You are so welcome!

[@jaysongz5191]

How much did the door frame cost?

[@RefreshHomeImprovements]

They aren’t cheap. This was given to us as promo for the video, so we can’t really say