No video

refurbished: vintage Mulitplex ASK 18 model airplane

  Рет қаралды 3,707

Hilmar Lange

Hilmar Lange

3 жыл бұрын

Nach einer Grunderneuerung insbesondere des Rumpfes sieht meine kleine 1,50-m-ASK-18 von Multiplex aus dem Jahre 1996 wieder aus wie frisch aus dem Karton gepellt.
Viele Jahre lag sie unbeachtet im Keller, und jetzt darf sie wieder zum Spielen raus, nachdem ich ihr zusätzlich einen BL-Antrieb in die Nase verpflanzt habe.
Die Flugeigenschaften sind mit dem alten Jedelsky-Flügel sehr angenehm, wobei das Modell nur über Höhe und Seite gesteuert wird. Was für ein schöner kleiner Oldie!
Die Musik habe ich über Cubase 10.5 mit einem Korg Wavestate Synthesizer eingespielt. Drumsounds stammen aus dem Wavestate sowie aus der Cubase-Library, und das E-Piano ist ein betagtes Technics PX-55.
-------------------------------------------------------------------------------
I refurbished my old Multiplex ASK-18 from the year 1996. Especially the fuselage needed a complete workover, but now it looks like freshly peeled out of the box.
The 1,50-m-glider airplane had been lying around unregardedly for so many years, and now it finally gets to play outside again. Therefore, I installed a 60-g-BL outrunner and a modern RC. The ASK flies very nice and smooth with its old Jedelsky-profiled balsa wing. What a joyful vintage airplane!
I recorded the music using cubase 10.5 and a Korg Wavestate synthesizer. Drumsounds are from Wavestate too, and from cubase library. The electric piano is a vintage Technics PX-55.

Пікірлер: 22
@HolzundLack
@HolzundLack 10 ай бұрын
Schick und echt retro. Aus der Serie ist mir der Motorspatz noch bekannt.
@Depronator5
@Depronator5 3 жыл бұрын
Wunderschön dein Modell und das Video ich bin jetzt 75 Jahre alt und noch immer begeistert wenn ich so was sehe!
@rcpowres
@rcpowres 3 жыл бұрын
Einfach schön der Flieger! Wirkt wie entspanntes Fliegen!!!! Und dann am Ende so richtig ne Bremsspur gezogen. Wie damals als man noch Kind war...passt historisch zum Flieger 😄
@stephanbre
@stephanbre 3 жыл бұрын
Einfach schön gemacht, Modell und Video. Gratuliere!
@RCSoaringDiaries
@RCSoaringDiaries 3 жыл бұрын
Lovely job on the refurb 👍 There's something special about these old vintage models. Enjoyed the story you told in the video too.
@Rundumsfliegen
@Rundumsfliegen 3 жыл бұрын
Wow. Ich bin begeistert. Was ein schöner Flieger, und dazu noch passende Musik - top!
@Uncle_Bob.
@Uncle_Bob. 3 жыл бұрын
Wish I were there... Thanx 4 the video.
@Flug0815
@Flug0815 3 жыл бұрын
Perfekt umgesetzter Neuaufbau 👍🏻 Ich habe noch einen Multiplex Motorspatz (ebenfalls Jedelsky) im Keller liegen. Den werde ich demnächst auch mal zum Leben erwecken 😊. Das Modell war damals einfach zu schwer mit seinem Speed 400 Getriebeantrieb und den NC Zellen.
@opcom100
@opcom100 3 жыл бұрын
Da bekomm ich richtig Lust meinen alten Airfish mal wieder zu reaktivieren
@rohlmannflieger
@rohlmannflieger 3 жыл бұрын
Ich liebte den Airfish.
@juebest
@juebest 3 жыл бұрын
Einfach klasse... und Musik kann der Mann auch noch 👍😉
@alexherrera3918
@alexherrera3918 3 жыл бұрын
Pretty plane and with simple airfoil flies real nice. I was under the impression that you always need a zbend in the control rods....it was wrong. Thanks for sharing!!
@HilmarLange
@HilmarLange 3 жыл бұрын
As long as there's some sideways-tension in the wire to keep the L-bend into their ruder arms, there's no problem wit this kind of link. Of course it is just a solution for lightweight models, where the forces are low. If you don't need it to be taken apart, just add a little drop of UHU por all over the joint. It will stay flexible and doesn't disturb the movement - the dried glue even eleminates the slightest play between the rod and the hole. If needed, you can peel away the glue at any time and take the rod out with no effort.
@luizcarlosmatias2022
@luizcarlosmatias2022 2 жыл бұрын
parabéns irmao muito show!
@michaelhirschauer5322
@michaelhirschauer5322 3 жыл бұрын
das war auch mein Lieblingsmodell am Hang, früher war alles so wunderbar unkompliziert.
@NorbertWigbels
@NorbertWigbels 3 жыл бұрын
Super-schöne Präsentation. Das Modell von Multiplex kannte ich gar nicht; lag aber auch zwischen meiner ersten und zweiten Modellbauphase. UND mit dem Rad zum Segelfliegen: Mache ich auch am allerliebsten:-)
@ronirc
@ronirc 3 жыл бұрын
Very gooood
@rohlmannflieger
@rohlmannflieger 3 жыл бұрын
Jedelsky bester Mann.
@rohlmannflieger
@rohlmannflieger 3 жыл бұрын
Abgesehen von Dick Kline...
@HilmarLange
@HilmarLange 3 жыл бұрын
Gerade noch gerettet! 😁
@robin1831
@robin1831 3 жыл бұрын
👍👍👍
@oberst_krass
@oberst_krass 3 жыл бұрын
Ja, die Klassiker..... .....zeigen uns immer, dass früher Vieles anders war.... ....und dann merkt man, dass man das Wort "früher" benutzt und stellt fest, dass man auch schon ein paar Jahre auf dem Buckel hat. Aber egal, oder?
Massive 16 Foot Rubber Band Powered Airplane
14:03
Think Flight
Рет қаралды 2,1 МЛН
The secret about biplanes | The reason why they don't fly anymore
6:46
Logo Matching Challenge with Alfredo Larin Family! 👍
00:36
BigSchool
Рет қаралды 6 МЛН
👨‍🔧📐
00:43
Kan Andrey
Рет қаралды 9 МЛН
Why Is He Unhappy…?
00:26
Alan Chikin Chow
Рет қаралды 100 МЛН
Советы на всё лето 4 @postworkllc
00:23
История одного вокалиста
Рет қаралды 5 МЛН
Inter-Ex 2021
30:49
Hilmar Lange
Рет қаралды 7 М.
So gelingt der Einstieg - Modellfliegen lernen 2024 - Teil 1
18:02
Stick Life - RC Adventures
Рет қаралды 3,4 М.
Fliegen an einem Freitag im Juli...
5:18
Wolfeye80
Рет қаралды 1,3 М.
Bills lovely UMS 9 cyl radial 115cc
5:15
David Mulcahy
Рет қаралды 1,2 МЛН
Vergurkter Erstflug! Ist das noch zu reparieren?
14:59
Hilmar Lange
Рет қаралды 19 М.
Can You Forge Tungsten?
16:14
Alec Steele
Рет қаралды 1,1 МЛН
Fred Rash's electric circle plane
5:59
joshuawfinn
Рет қаралды 4,2 МЛН
Mein Thermik-Elektrosegler: Holz-Raus!
4:51
Hilmar Lange
Рет қаралды 9 М.
Flywheel Trebuchet
9:09
Tom Stanton
Рет қаралды 4,8 МЛН
Giant RC Rocket Plane
19:46
ProjectAir
Рет қаралды 396 М.
Logo Matching Challenge with Alfredo Larin Family! 👍
00:36
BigSchool
Рет қаралды 6 МЛН