you have said that after merging, both previous regions are now one region. But after that you compare both of previous regions separately with their neighbor regions. How it is possible as considering them as single, but dealing them as separate...
@pratikian4 жыл бұрын
You are right that is a mistake that I have done. Once the region is merged you should compare it with the whole region. Thank you so much for pointing it out.
@lancelofjohn69952 жыл бұрын
@@pratikian Hello ,does it mean if we compare the fourth part ,we have to use the combination of first, second ,third part as a whole region. Then we use the max ,min value in whole region composed of the first, second, third part to compare with the fourth part to get the difference between whole region and the fourth part. In the end by using threshold to identify if the fourth region belongs to whole region composed of the first, second, third part.
@GateHalder5 ай бұрын
still the answer is same no need to be angry
@Udta_Parinda.5 жыл бұрын
After two hours i have my exam and you saved me!!!! Thanks a lot!!!!
@pratikian5 жыл бұрын
Most welcome ... 😊👍 and all the very best ..👍
@imanesamiry1114 Жыл бұрын
Thanks a lot. For this method, we also choose a number that is in the middle of the range, here the range is 0 to 7, so we can choose 3 or 4? because if we choose the maximum and minimum from a different region than the one you've chosen, we may get a different threshold!
@RaunakGupta-t2v4 ай бұрын
nice broo
@josemiranda23404 жыл бұрын
Que maquina, ojala mi profesor lo hubiese explicado así
@pratikian4 жыл бұрын
muchas gracias
@gangadharshaktiman86067 жыл бұрын
Pratik plz solve an example of opening and closing where the seed element in the structural element has zero
@pratikian7 жыл бұрын
I have solved the dilation and erosion examples with the structuring elements having seed points zero the same concept is to be applied for opening and closing
@d47-mithilnaik165 ай бұрын
Ye Quad tree representation kya hota hai ???Kisiko pata hai kya ??
@husseinsaad93484 жыл бұрын
Thank you!
@JayaKumar-mw8nd6 ай бұрын
Thanks bro very helpful
@mithunchandrasaha4033 жыл бұрын
Nice Explanation.Sir
@karthiksg29765 жыл бұрын
Very good explanation
@pratikian5 жыл бұрын
Thank you so much ..😊👍
@lachulachus66234 жыл бұрын
during merging if still there are regions which don't satisfy threshold condition no need to consider it during merging right???
@pratikian4 жыл бұрын
Right
@bhartjeet67055 жыл бұрын
Nyc video 👍
@pratikian5 жыл бұрын
+Bhart Jeet thank you ..😊
@pratikian5 жыл бұрын
+Bhart Jeet thank you ..😊
@meriemmeriem62545 ай бұрын
thankx 👏
@atmaprakashsingh82816 жыл бұрын
Please post some video on grey level dialation n erosion using example.
@pratikian6 жыл бұрын
+ATMA PRAKASH SINGH kzbin.info/www/bejne/gJTPlYFto7qcsNE Start watching from 39.21 mins
@atmaprakashsingh82816 жыл бұрын
A=(1,4,5,7,2,1,8,9,2,1,6) n structuring element B=(1,4,6) then how to find out A dilation B .please provide the solution.
@lachulachus66234 жыл бұрын
if a region have 4 pixels and it won't satisfy threshold condition during region splitting what is the further procedure used??
@pratikian4 жыл бұрын
So in practical cases it is rare to find such a case , either we can twig the threshold in such cases to get the required segmentation, also in some algorithms there is a limit to the splitting, say atleast some n pixels should be there in the segment.
@chandbasha66085 жыл бұрын
Hi is Region merge and split is same as STATISTICAL REGION MERGING if not please let me know
@pratikian5 жыл бұрын
+chand basha they are 2 different things in statistical region merging we first select a threshold and directly start merging the neighbouring pixels ... Whereas in region split and merge we first split the images according to the threshold and then start merging
@chandbasha66085 жыл бұрын
Thanks Jain for your valuable inputs can u please explain it with an example.
@pratikian5 жыл бұрын
@@chandbasha6608 a good example is given on wikipidia Check it out en.m.wikipedia.org/wiki/Statistical_region_merging
@gangadharshaktiman86067 жыл бұрын
Plzz give an example with image consisting of 1,0
@gangadharshaktiman86067 жыл бұрын
For region split and merge
@pratikian7 жыл бұрын
for 1s and 0s the concept remains the same, only here the threshold is what you need to change, split the image into 4 parts if a region consists of all 1s or all 0s then leave it as it is if this is not the case split it further after all the splitting done you should have regions with only one or zeros in it, then merge all the adjecent regions which have 1 or 0 and you get your ans
@gangadharshaktiman86067 жыл бұрын
Thanks Pratik
@pratikian7 жыл бұрын
most welcome
@gadarimaheshwari6984 Жыл бұрын
How to took those numbers in order
@pratikian Жыл бұрын
Sorry, I didnt get your question
@thetrainoflife83273 жыл бұрын
Thank you bhai ❤
@MISKATAKAMVENKATASAIHARSHITH4 жыл бұрын
Should the matrix be even matrix like 8,8 or 10,10 like wise
@MISKATAKAMVENKATASAIHARSHITH4 жыл бұрын
Or it could be like any type of matrix
@pratikian4 жыл бұрын
@@MISKATAKAMVENKATASAIHARSHITH if the matrix is odd then like say 11x11 then you could split into cells of 5 and 6
@business-hy3lb6 жыл бұрын
If u take 2 regions for merging . U take max - min of one region with another . Forward and reverse . What if one condition satisfies and the other dosent ? Will it merge ?
@pratikian6 жыл бұрын
There are very less chances that that will happen
@vinayaksharma-ys3ip2 жыл бұрын
Thanks bro!!
@shortsclip95575 жыл бұрын
thanks worthfull watching
@pratikian5 жыл бұрын
+shubham kumar thank you so much ..😊
@pranavvenkatesan97126 жыл бұрын
bro what if the image does not have equal dimention? like your image has 8x8 dimension what should we do if we have an image with 8x9?
@pratikian6 жыл бұрын
Then you can consider unequal split Means a split of 4 and 5 for 8 by 9
@pranavvenkatesan97126 жыл бұрын
@@pratikian while merging, consider 3 regions'a,b,c' ; what if 'b' satisfies the threshold condition with 'a' but not with 'c'? should i consider b in the final region or not?
@pratikian6 жыл бұрын
@@pranavvenkatesan9712 then a and b will merge to form 1 region and c becomes other region
@pranavvenkatesan97126 жыл бұрын
@@pratikian but c somehow merges with 'a' through other regions present in the image
@pratikian6 жыл бұрын
@@pranavvenkatesan9712 then a b and c all will merge Remember merging only happens with the neighbouring regions Suppose A B C are 3 regions and threshold of a and c is same still because B is there in between merging wont happen
@shif13654 жыл бұрын
Thank you so much ...sir
@priyalakshmi70646 жыл бұрын
hello pratik, will you be able to check the code for splitmerge? Ain't able to implement it.I may send you a mail.
@pratikian6 жыл бұрын
yea sure
@shirishakaleru74425 жыл бұрын
Thank you so much sir
@saumyatiwari10035 жыл бұрын
Thank you so much
@supriya32095 жыл бұрын
Thankyou so much !
@pratikian5 жыл бұрын
Happy to help 😊
@dkhongshei57985 жыл бұрын
Thank u soo much
@king-hc6vi4 жыл бұрын
What if the question contains only 0 and 1 then how to decide threshold
@pratikian4 жыл бұрын
For a binary image you have only 2 values 0 and 1 the threshold can be 0.5 basically 0 is one part and 1 is other
@king-hc6vi4 жыл бұрын
@@pratikian okay thnks
@king-hc6vi4 жыл бұрын
@@pratikian so in this case 1's will not merge only.. Right??
@pratikian4 жыл бұрын
@@king-hc6vi 1s will merge with only 1s and 0s will merge with only 0s
@yadneshkhode30916 жыл бұрын
Thankyou so much!!!!!!
@pratikian6 жыл бұрын
Yadnesh Khode most welcome ...😊
@elprofessor57412 жыл бұрын
Real ID se aa Dinesh
@siddharthmuralidharan6234 жыл бұрын
Very helpful
@varunsharma67804 жыл бұрын
Saved me today
@pratikian4 жыл бұрын
+Varun Sharma happy to help ..😊
@varunsharma67804 жыл бұрын
@@pratikian Wanna collab? I also have a channel Learners Hub Having 2k subscribers
@pratikian4 жыл бұрын
Colaborate as in how ?
@varunsharma67804 жыл бұрын
@@pratikian means we can place all videos on one channel.... We'll get more subscribers
@mithlesharya44576 жыл бұрын
please share code in matlab if you have
@pratikian6 жыл бұрын
I have not made a Matlab code yet for this.. sorry i can help you with solving the errors if any