Regulator Repair - Regulator Creep

[@garyt3hsna1l82]

8 years later thanks for posting this i was nervous about taking these apart.

[@scottytizzle]

If the O-ring doesn't look damaged, some keg lube would likely help maintain a proper seal better than trying to seal the threads.

[@guntodd]

I hear hissing sound coming from the pressure relieve. Is this repairable? It’s the chrome looking on your regulator.

[@mikewonderlust2912]

thank you 4 the video.

[@VladFredK]

Dude, you would be wrong.

[@kpkpkpkpkpkpkpkpkp]

working pressure guage not showing a reading , however there is output from the regulator , i wonder what could the problem be

[@Joe-cb1kd]

What if my pressure decreased over night but tank pressure is still the same

[@TNBen60]

I have this problem as well. I set the pressure on a fresh keg and it should be using gas as it goes into solution. But the regulator acts as if I had closed the valve on the tank and shows no pressure the next day. I readjust the regulator until it shows the set pressure again. Then it goes through the whole thing again. I’ve leak checked everything I can think of from the tank mount to all the seals on the keg. My thinking is that if it was a leak the regulator should try to hold the set pressure until the tank was empty. It’s still quite the head scratcher for me.

[@davebenham4933]

we have this same regulator and its blasting 50psi on lowest setting

[@miguelpadron2669]

I did it and i worked

[@swimwithcoachraven1532]

Mine didn’t have a needle

[@davidsimmonsjr7]

Replace o-ring, if u still have creep buy new regulator

[@deanmurray4953]

Found no O ring (missing)oxygen regulator model FPR 150cr,gas leaking from bell

[@heidimartin3329]

Can a regulator suddenly stop working all together, not due to mishandling or care ??

[@JayKTS]

👍🏻

[@Proteinpapi210]

I got this same regulator it’s junk I returned it