Reinstalling The Stock Interior… Will It Fit? - V10 Continental Build Ep. 7

[@biy_buildityourself]

Let BetterHelp connect you to a therapist who can support you. Visit betterhelp.com/BIY and enjoy a special discount of 10% on your first month. If you have any questions about the brand relating to how the therapists are licensed, their privacy policy, or the therapist compensation model, check out this FAQ: www.betterhelp.com/your-questions-answered/

[@laddtryck]

Have you read about their controversies? I would reevaluate a sponsorship by them. :)

[@KrazeeCain]

I know you guys probably need the money, but I would avoid future sponsorships from betterhelp as they're pretty sketchy and may hurt more than they help. Lots of controversy around them.

[@ImpossiblyBlack]

Betterhelp is basically the ride-share service of the mental healthcare industry. What can go wrong?

[@Nazi-yr7rl]

Scam company

[@mlsabc1236]

How much RPM does this 2017 Lincoln Continental have in its tachometer?

[@MichaelMisanthropist]

As a Lincoln technician I'm excited to finally see someone doing something cool with a Continental! If you guys need workshop manual info just let me know!

[@HumpingBunny]

When do you recommend transmission oil flushes? Got a 2017 3.0 🫡

[@lukeharwell7392]

Same, I’ve chased some crazy electrical concerns in these but it’s therapeutic to see one get turned into this!

[@VantageOwner]

As a former Ford engineer, this is high key my favorite build on KZbin. Way better than anything we did from an OEM project

[@motormossvlogs1450]

Maybe you could help them with some pointers how to wire/ get thing s working in sync with eachother? 🤷‍♂️

[@seanstump6636]

Agreed. Totally insane and absolutely genius

[@mahdialsadiq349]

You need RPM signal to turn on the steering assist

[@dadgarage7966]

Yeah, I was just thinking that. Although I thought it might be oil pressure but a tach signal makes more sense.

[@christopherwedemeyer2993]

Not sure. My 2012 Mustang has power assist with the engine off, as long as the key is on. I've rolled down the driveway with the engine off many times and still had the assist working perfectly.

[@mchristr]

And sufficient battery voltage. My 2019 F150 battery gave it up and even after a jump the power steering didn't work. Swapped in a fresh battery and...bingo!

[@frostbite1991]

There should be a towing or recovery mode that turns it on. Most electric rack vehicles have that feature, though it's not widely advertised.

[@hunterpinnell6254]

Most undervalued channel on KZbin without a doubt. You guys are talented and your enthusiasm is infectious. It is amazing what you guys have accomplished in such a short amount of time and without the tools and workspace that some other channels and OEM's have. Just mind-blowing.......When you guys were laying out your plan to stitch together a DOHC engine based on a single cam bottom end, I giggled to myself an said, "not a chance". I have never been so happy to be wrong. I just figured there was absolutely no way you would get those heads straight enough to keep the thing from grenading itself on first crank. I just cannot believe it. So freakin happy for you guys and sure hope Ford is watching. You guys have just proven the OEM are lazy in my humble opinion. Keep on swinging for the fences......!!!!

[@azurvul2320]

adding AC back in the car would really top off the stock look and feel of the interior and set you apart from all the other builds that ditch it imho. I've been following yall since you began this project and can't wait to see this thing cruising! keep up the amazing work yall!

[@TheSunChaserUS]

I think for their project the best would be an small electric compressor, and a bigger battery in the trunk, moving some weight to the back and keeping the engine without the drag of the compressor

[@azurvul2320]

@@TheSunChaserUS drag on the engine is a none issue tbh. AC compressors are just an extra free-spinning pulley when they are off. but the electric compressor is a great idea considering the general lack of space under the hood. lol

[@reggeckmann3993]

Best FORD build ever!

[@AK_Ray]

I just can't give you guys enough credit. The engine build was freaking awesome amazing content. But the car build, especially a grandpa car like a continental, to be so engaging and interesting is on a whole different level. Great job fellas kudos to you

[@johnkilo3]

The enthusiasm you guys have for this project is infectious. Love this build!

[@mwjscn]

Cortex Racing has a Ford EPAS CAN Simulator product if you can't get the steering to work with the existing systems in the Continental.

[@delagto_5340]

I wonder if it’s like 11-14 Mustang there is a dude that makes epas module that has selectable modes

[@biy_buildityourself]

We will check that out, thank you.

[@jpabon18]

I'm glad to see you guys kept the AC

[@jayroyce20-Garage]

we wont complain if the next video is an hour! lol the seats brought it out really good

[@brucejohnson3905]

I had one of these with all wheel drive and 400hp. Ford did design it for power on the rear axles.

[@frankmcnally996]

As a retired Covert Automotive Tactics and Reconnaissance member, the fact that you two are making it look as stock as possible is great and deserves 10 gold star stickers.

[@Entropy_Wins_4476]

Since McConaughey was the spokesperson for Lincoln for quite a while, you all should reach out to Ford and his people and maybe do a colab reveal once this beast is ready :)

[@MichaelBLevi]

I continue to be amazed by the amount of hard work and engineering that you've thrown into this project. 🦖

[@jameskazd9951]

I can not get over how cool this build is, can't wait to see it completed.

[@brianj7787]

I subscribed because your V10 video popped up, didn't realize what it was going in. Way cooler than the New Edge mustang i was imagining

[@benganey3924]

Dont worry about who is sponsoring these guys, hopefully everyone knows better by now but they are the most insanely under-subbed channel on youtube. I dont care if they read copy for temu just get your money guys and keep up the good work. This is absolutely my favorite project anywhere and truly cant wait to see it finished! No notes carry on!

[@jonmac155]

33.3k subs. Nice been here since the low single digits. Getting traction now. 100k won't be long.

[@HammerWrench]

I joined up in the 600s. Good times!!🛠️

[@biy_buildityourself]

Glad you guys have stuck around!

[@Entropy_Wins_4476]

I think those brown seats were part of the "Thoroughbred" interior package.

[@dadgarage7966]

This shit keeps getting better and better. You two really work hard to make meaningful progress. Initially, I thought hunting down those (really nice) seats wasn't the best decision but seeing them cleaned up and in the car, you've changed my mind.

[@merlinrich]

I totally agree! Losing a day on the build for junkyard parts was a head-scratcher at first, but now I get it!

[@TheIntensiveCarUnit]

Most EPAS vehicles wont power the electric assist until the vehicle has had the key on and engine running. Once the BCM senses that the engine has ran, it will allow electronic power assist. One additional consideration is the battery needs to be pretty healthy, as EPAS can have a pretty high amperage draw.

[@ryanc3219]

RE: Rack cluster message. When replaced the rack in my wifes Explorer, (installed new Ford part) had a similar message and had to go to the dealer for programming. Might be similar for you.

[@etelking]

by far my favorite build on you tube right now

[@matswallsten1628]

What a great project this is, love that you are going to such a length to restore it to almost stock looking. Getting it all working as it should and building a luxurious monster

[@neilziesmer6109]

CRAZY AMOUNT OF WORK , TOTALLY AWESOME BUILD

[@MBr397]

You guys are amazing! By far, one of the best builds on KZbin.

[@dhilboy231]

Hell yeah! Oem style sleeper build 🔛🔝

[@DarkFiber23]

You guys are legitimately the best new KZbin channel I've seen in years. Amazing job so far and keep up the great work!

[@biy_buildityourself]

We appreciate that so much! 🙏

[@freedomisntfree_44]

I CAN NOT WAIT for this thing to drive for the first time. Truly unique guys 🤙 take your time, Slow is smooth, smooth is fast. It’ll be done soon 😊

[@thesingingtiggs4781]

One of the most unique awesome builds I've seen I can't wait to hear this thing at 8k rpm banging gears.

[@johnnymossville]

I can't believe I haven't found you guys before today. This build is incredible. Love what you are doing!!

[@merlinrich]

Dudes, I need MORE content! I watch almost zero KZbin, but check for these videos weekly. Give us more! No shorts- those are garbage. Five minutes, ten minutes- I’ll take whatever you got ;)

[@justinredman4389]

I have never been excited over a Lincoln Continental. LFG fellas!!!

[@biy_buildityourself]

Lets make the Continental great again!

[@DericO-rz3be]

*SUPER SWEET* YOU young gentlemen are the future of hot rodding engineering... No Hoovie b/s influencer photo fakers here.. Rock On!

[@davegt27]

when you started to jump and dance I thought you where getting shocked lol

[@biy_buildityourself]

Shocked with relief and joy 😂

[@r0ast5_61]

Man it's so awesome seeing each step of this thing being brought to life. I can't wait to see you guys stretch it's legs in style

[@802Garage]

You lads are insane. Love it.

[@WilliamMacedoSilva]

Following this incredible project from Brazil, binge-watching the videos from the beginning and returning to see the details and the roar of the V10. You then transformed this Lincoln into something special mechanically, something it should also be. An area that the bean counters at Ford neglected.

[@markforbes4704]

This is the best build on KZbin!

[@mason4683]

New to the channel. It's disgusting how good you are at this.

[@zacharychavez3482]

Those seats look sick! Love the brown leather with black interior and wood accents.

[@xX_Gravity_Xx]

As a fan of Lincoln's value for money, this project is pretty awesome. Kinda defeats the purpose, but that's just what it needed!

[@brendonhearn8778]

That Victory dance tho! AWESOME guys!

[@motormossvlogs1450]

This is my favorite build to watch ever on youtube. You guys dont get enough credit. But please dont ever stop this build. And dont stop til shes right! What state are you guys located? Be cool to see this car in person someday.

[@98lincolnmarkviii]

Always excited for a new video. They never disappoint. Awesome work as always

[@anthonygendriz5839]

Cant wait for you guys to finish this

[@KrazeeCain]

Some EPS systems won't work unless the alternator is charging, that might be your problem with the power steering.

[@GrapeFaygo959]

I've been watching you guys since part 1 I'm really excited to see how this will turn out

[@Achillessoul]

Awsome video today, i love the upgrades to the interior and honestly couldnt believe how well thos seats looked after sitting outside for a while!

[@mrspartan6968]

This is such a great channel! Very entertaining to watch and what a project you guys are taking on!

[@-MacCat-]

I'm super stoked at seeing you reach this milestone. Very well done guys. Onwards and upwards, as SEMA looms closer.

[@johnnycaudill5088]

Plug in the factory rack and pull the as built data from it using forscan then plug in the gt500 rack and load the as built date to it

[@olumayoor]

This is freaking awesome stuff!

[@2burning2turning]

You guys are killing it. My favourite bile on KZbin.

[@krombopulosmichael7994]

no point hiding the shifter inside the console. you will just annoy yourself while trying to shift. put an extension handle on it to get it above the hole and use a short throw shifter, then put a nice looking boot around it that matches the interior seats or trim.

[@DaBlaccGhost]

Stumbled on this series when I saw that v10 testing now I'm invested to see it fit in a continental keep it up guys 😂

[@PureChaos71]

My fiance and I also live in Michigan, downriver area. We would love to see it personally when this monster is completed! Are you planning to take it to the dragway in Milan? We have to come check it out!

[@kolideoskope]

Looks great, I love the idea of a retractable shift knob

[@jonathanjones1814]

I hope it's ready in time for SEMA this would be a cool introduction.

[@stevenhigginbottom5261]

Man, I live in Traverse City. I could have checked out the seats for you! Great work, as always.

[@robertwhitey6621]

Did you download the info from your original rack and transfer it to the new rack? I just changed mine in a MKZ and had to program the new rack with the old racks info. Nice call on those seats.

[@Wesleystewart78]

what year mkz thinking about doing one in my 13 fusion and that sounds annoying

[@robertwhitey6621]

@@Wesleystewart78 2014 MKZ I’m on my 2nd one the last replacement went 1 year and was a warranty replacement. It’s a 4-5 hour job for me to do, really not that bad.

[@robertwhitey6621]

@@meta2016 Both were from Rock Auto rebuilt racks from Cardone.

[@Mr-Neven]

My favorite build

[@TheTruthBeToId]

It's incredible that everything is going back together after those big modifications.

[@johnr1997]

so sick! love the way the build is going

[@evlsc400]

I freaking love this build!!!!!

[@trmpgod9976]

SOOOOOOOOOOOOOOOOOOOOOOOOOOOOO HAPPY FOR YOU ALL AND IT GETTING DIALED IN. DAMN, I LOVE THIS BUILD !!!!!!!!!!!!!!!!!!. GODSPEED GUYS !!!!!!!!!!!!!!!!!!!!

[@arkhsm]

This is a build beyond my pay level !!

[@DgtalBreakz]

You guys rock, what an inspiration :)

[@jimmymccormick142]

Looking good fellas great job can't wait to see the finished product

[@randr10]

My Flex is on that same platform and the electric steering assist will not operate unless the engine is running. You'll probably have to figure out how to trick it into thinking the engine's running to get that working.

[@claytonhaag6931]

So relatable guys. Super work. Most entertaining....

[@PeeterPuncher]

A milwaukee M12 battery works great as a junkyard powersource.😉

[@Mike-Honcho-]

It would be awesome if you guys could take this to Woodward this month, and yes, there are rattlesnakes in Michigan, it’s called the Massasauga. I have lived here for over 50 years and never seen one in the woods or anywhere else. Love the car guys!

[@biy_buildityourself]

Man, that's this weekend??!!??

[@mchristr]

I'm thinking you should mount a factory-looking shifter and boot. That would definitely cause people to scratch their heads.

[@YusssoM]

I like how everything is all in pieces but it's all working 😂 great job guys

[@oldhomeguy8214]

I hope there’s more builds after this one

[@jcr6548]

This thing is amazing guys well done cant wait for the burnouts

[@dryspaghetti5507]

Amazing video👍👍

[@DoesItTho]

This car is badassical!

[@paulcartmel1373]

Love the videos and can’t wait for the next one!

[@rafalr8061]

sweet project!!!!!!!

[@jayallen408]

You guys are awesome 99.5 % of us will put everything back in that car and then figure it out😊

[@coyoteslugger3936]

I'm looking forward to the completion of this project. I've thought of covering my taurus sho with a coyote platform.

[@biy_buildityourself]

That would be cool!

[@jth1987leb]

As a former user of better help it’s sad to see they got to you.

[@ipoopmuffins]

man that interior is really coming together, love how factory it still looks. cant wait to see how it sounds with a full exhaust setup under load and see how it handles.

[@commonsenseisdeadin2024]

press and hold the start button not applying brake and it will simulate running

[@darnoldie]

A most amazing build to be sure.

[@andreasmessner7357]

Can’t wait to see the dyno video!!!!

[@aaronburratwood.6957]

Damn I love this build‼️

[@MrTakeone51]

Ford needs to sponsor you guys . Also are you going to replace the drivers airbag ?

[@biy_buildityourself]

Yup, we just need to pick one up!

[@Slugger4264]

Just. Awesome!

[@Hope4NewDay1]

I got caught off guard hearing the Smash Bros. Brawl Trophy unlock Hammer sound effect at 16:38

[@kevinanglin678]

Wonder when the project will be dyno ready

[@FoST3boi]

What’s the music @ 15:00 etc

[@jetink600]

Things are moving along at a nice pace

[@bradleyborrowman2115]

Yoooo LETS GO BABY BEST SLEEPER OF THE YEAR

[@jgodshall80]

Electronic racks are coded to the vehicle and whichever module controls it.

[@Achillessoul]

Question for you guys, if i remember correctly you mentioned that you were hoping to take the car to sema. Do you guys think thats still a go? I have the opportunity to go to sema but been on the fense about it and was looking for a great reason to go 😊

[@biy_buildityourself]

That was our hope! But nothing confirmed as of yet. We’ll continue pushing to get the car done as soon as we can in case the opportunity comes up though