5/7 Drop F150, 2wd, Harley Davidson, Under Bed Notch, Djm, Belletch, Reklez,

F150 Harley Davidson receives the Reklez Suspension Works treatment. Parts List:
3" Control Arms, 2" Adjustable Strut, 6" Flip Kit with 1" Shackles, Rear Shocks, & Our Reklez Under Bed Notch.
**Smooth Look Even Better Ride**
Follow Us On Instagram: reklez_suspension_works
Facebook. reklezsuspensionworks
Buy Parts Direct: www.reklez.com
Like, Share, & Follow.
Thanks God Bless. `

[@sparkyboots]

Love the Low F150 love guys... Keep it up!

[@xavierdeveto2621]

awesome video! very clean kit, and yall did an amazing job!

[@MrSelesteg1]

Awesome job you guys do some great work love the videos

[@christianvega2168]

Truck came out awesome!

[@ReklezSuspensionWorks]

Thank you! Appreciate it

[@Mikelspower]

Love your videos!! Always great !!!

[@adrianreyna5789]

Hey looked on yall website I can't find the control arms or anything yall used on this truck

[@adrianreyna5789]

How can I get this kit i looked on yalls website didn't see it 😫 😔

[@G.L.P.40]

How much is job like tht

[@1lowfx2]

We’re the rear fenders rolled up?

[@marcogalaviz1241]

Ay quedo looks clean dos rims aki andamos al millón

[@tonyzapien369]

Just noticed your truck is the same year as mine bro looks good in your pic I’m trying to drop mine what drop do you have?

[@iconvictt-4285]

What’s the price on a job like this everything you mentioned

[@ponchorunsthis]

Man I need to come by are you guys open on the weekends. I live in Dickinson. I am 30 mins away I only want a 2inch drop from and back

[@xavierdeveto2621]

would this be possible on a 4x4? Ive got a 2011 platinum and Im worried the combo of the belltech coilovers and djm control arms rubbing the front axles

[@904Sharker]

Do you have to cut the bed for the under bed notch? Truck looks great

[@vic5.7]

came out bad ass i need to do this asap to mine im running an 8inch in the rear was wondering what shocks you guys used in the rear?

[@Lshiftstraley]

I now own this truck and let me say it rides amazing! It drives better than my 335i ! Any more videos on the exhaust or information on the system it was ripped out when I bought it and I'm trying to get it fixed up right

[@betocampos6008]

Had 2 10 mmats audio on a fox box as well for 1000 monoblock amp also had a audiocontrol lc7 and audiocontrol epicenter Indash on it and 4 bullet tweeter oh and a skar 150.4 amp for voice

[@Lshiftstraley]

@@betocampos6008 damn that thing must have sounded amazing. I have a 6 channel wet sounds amp I plan to wire into the door speakers. Thanks for the reply!

[@betocampos6008]

It was pretty good man and that 6 channel amp is gonna go perfect with the door speakers bro btw I forgot to mention on exhaust it was a borla bullet exhaust and I’m guessing the long tube headers are still in place? Thing was a beast man

[@Lshiftstraley]

@@betocampos6008 yeah it's still got the headers and stuff it has a few bolts broken off tho. So I'm going to pull them off and get the broken studs out of the heads. Yeah I need to get them wired in for now I just ran the factory sony amp for the door speakers since when I bought it there was no sound at all. And then I put a pioneer 10" in it and it sounds okay similar to stock but with more bass.

[@sueloalex]

Do you still own it and how does it ride?

[@Cruz_Gaming96]

Is it possible to still ride stock height with it with an airbag kit and still be able to tow? Also do you do work on vehicles out of state

[@larryolivarez1601]

what year is this truck

[@isaias__5.087]

Instead of die grinder can I use a drill with the carbine tip?

[@cesargarcia8430]

Where are you guys located ?

[@cesargarcia8430]

What did y’all use to cut and smooth the under control arm holes for the camber ?

[@10ironhead]

When i do the 3/5 drop on my 2012 f150 which i want to purchase from u guys.. would it b a good idea to do the install the transmission bar as welk or would i b ok on clearance

[@stevetyre9486]

What thread pitch is the tie rod? I need to extend the threads on my tie rods like you did in this video

[@ReklezSuspensionWorks]

Not sure been awhile since we did it.

[@vic5.7]

For the 7 inch drop did you guys have any pinion angle problems?

[@fcura95]

What does that cost 3-5 for a 15 f150 crew

[@benitoquintanilla4886]

Do you guys offer anything for obs fords 93-97?

[@bradturner9030]

Getting a 2008 Ford supercrew 2 wheel drive.. Looking at doing a 3/5 lowering... What do you recommend as far as parts.. And.. Can I go lower without having to Weld anything.... Thank you in advance!

[@ReklezSuspensionWorks]

Yes call us to get you the parts you need.

[@ImDead1nside]

@@ReklezSuspensionWorks do I still need to slot it if I do the djm control arms only?

[@carlosgamboa5069]

Would these same parts fit my 07 Harley

[@TheTruthBeToId]

I was hoping to see the new transmission mount job.

[@ReklezSuspensionWorks]

There is a whole video on that. Check our channel.

[@Gmz_JP]

What do u use to rethread the tie rod any link to tool?

[@ReklezSuspensionWorks]

We use a tie and tap set. We bought at harbor freight. No link sorry.

[@Gmz_JP]

@@ReklezSuspensionWorks thank you, also i was on ur website looking for this kit i did not see a drop kit offered for the f150 is this kit not sold by u?

[@ReklezSuspensionWorks]

@@Gmz_JP no problem. We do offer/sell it but haven't posted it on the website. We are still adding kits and parts. You can place the order over the phone [phone]. Thanks

[@jacobparker4727]

So I’ve got a ‘17 f150 on a djm 3/6 with the control arms up front......if I get a drop strut for the front am I going to have to notch the control arm bolt holes?

[@ReklezSuspensionWorks]

If you're doing a lower drop then yes.

[@wscottparks]

Will the owner add bags in the rear to keep from having that "rear-end sag?"

[@ReklezSuspensionWorks]

Dont think so. He like the way it looks.

[@coyote5.069]

Did you use the 3 inch shock from belltech? And do you offer that lower control arm?

[@ReklezSuspensionWorks]

Yes the strut from belltech and the control arms can be purchased thru djm suspension ( google them).

[@coyote5.069]

@@ReklezSuspensionWorks Awesome, what would be the price for a 2012 single cab with a 5/7

[@cdk3283]

Whats the lowest I can go on a 4wd

[@FernandoTorres-hb7qf]

How much would it be for a 4/6 drop on a 2014 F150?

[@roeldeleon8025]

Fernando Torres like 1000 dollars lol

[@frederickbryant7347]

Can the 2 inch drop spindle, 3 inch djm control arm, 1 inch adjustable strut be combine for a 6 inch drop for 2005 F150

[@ReklezSuspensionWorks]

Yes you can.

[@rudyarrieta3752]

Aye how much for the alignment, I dropped my truck 4/6 it goes hard left when I'm driving

[@ReklezSuspensionWorks]

Aye for prices call us

[@beast1158]

On a 2000 Chevy for a 5/7 what has to be done on the rear ?

[@ReklezSuspensionWorks]

Same thing

[@beast1158]

And on the front it’s up and lower control arms ?

[@ReklezSuspensionWorks]

@@beast1158 check our videos bro we made one about that drop

[@kurupt8308]

Could you recommend a good air bag suspension set up?

[@ReklezSuspensionWorks]

For a full kit we will be building one soon. For a air bag helper kit it needs to be custom built. We can do both.

[@GilbertKingAispuro]

On a drop like that, are you able to add an air suspension kit to go back to OEM height? If so, how? I have an F-150 and would like to be able to slam my car and raise it.

[@ReklezSuspensionWorks]

Not to OEM height since its drop. But you can install a air bag helper to be able to haul/tow.

[@andresmartinez9454]

Can you slot the control arm brackets on a 04-08 f150?

[@ReklezSuspensionWorks]

Yes, would be the same work if doing the same drop

[@andresmartinez9454]

Reklez Suspension Works what if its control arms and spindles

[@juanmartinez6496]

What if spindles and drop struts on an 05

[@anthonyrodriguez8482]

Prolly too late for you guys but for others looking I was able to get all front end alignment done without any modding using belltech lowering struts and 2 inch lowering spindles of a total of 4 inches gonna go 5 inch as there is still a spacer in the strut once I cnotch but dont know if alignment will be a issue at that point

[@anthonyrodriguez8482]

I'm driving an 2007 crewcab xlt 2wd 5.4

[@iHernandez620]

Damn !!!

[@fusedupp7014]

wen u guys uploading videos for drop 01-07 classic body crew cabs wheel tubs front and back ????

[@ReklezSuspensionWorks]

Not any time soon. Dont have any lined up yet.

[@MrDraking]

Tire size?

[@ReklezSuspensionWorks]

285/35/22

[@G.L.P.40]

Like to see 2018 ram 1500 dropped

[@ReklezSuspensionWorks]

We have two videos on those.

[@rubenvalles261]

I have a 2013 f150 So I recently purchased from y’all’s page the 3”5 drop I got the beltech drop shocks in the front and flip kit on the back. A day later after installing everything on my truck I went to an alignment shop to get it a aligned. They tried their best to remove the camber but you can kind of see it still. What should I do in order to remove the camber but keep my 3 inch drop in the front??

[@jdeco1856]

Damn looks like a bi*** to lower a Ford

[@enriquemorales4003]

To low

[@ReklezSuspensionWorks]

No such thing 👌

[@meanpaintandbody]

How big of a rim can u install with out rubbing

[@ReklezSuspensionWorks]

For this drop is the 22s. You could possibly do 24s with low profile tires.

[@meanpaintandbody]

U got 5 inch from control arm and strut? No spindle?

[@ReklezSuspensionWorks]

Exactly. No drop spindles are made for this year truck

[@meanpaintandbody]

@@ReklezSuspensionWorks orale thanks for the info learning a lot from ur videos i wish they had this kind of videos before when i was trying to learn everyone told me to fuck off

[@ReklezSuspensionWorks]

@@meanpaintandbody good stuff. Yeah bro back when I would ask how to do something, was told "its to hard to explain". So now we show you. So it motivates you to get it done. But most importantly you see what gets done in our shop not just pretty pictures. Hope that makes sense. God bless

[@meanpaintandbody]

@@ReklezSuspensionWorks makes perfect sence some people just dont like to show they think they want their job i think as long as u know ur doing thr job correctly u should b fine

[@ReklezSuspensionWorks]

@@meanpaintandbody exactly bro.

[@isaacterrazas3509]

Will the front end method work for the 2004-08 f150 11th gens?