Remote Start Install - 2019 Mazda CX-5 GT - Fortin Evo-One/ Thar-One-Maz3

[@cvocht]

Worked beautifully for my 2018. Thank you for putting this together! Side note. The kit I got from Amazon included the Mazda harness so it might not be necessary to purchase separately anymore.

[@Swiftest87]

You mean your EVO-ONE-MAZ3 Remote Start Combo included the THAR-ONE-MAZ3 t-harness already?

[@TaijiArban]

@@Swiftest87 same thing for my camry kit. Included everything I needed

[@iStig34]

Thank you for this guide! Worked perfectly on my 2019 signature. Went with the 3x lock option since I didn't want the auto folding mirrors to close & open with the lock unlock lock option. If you hit the lock button 3x quickly the car will beep and then only honk once as to not disrupt the neighbors at night.

[@ahmedmohfouz9955]

This video was awesome.. intaslled the same system in my cx5 2020 based on your guidance. It has saved me almost 180 $ per my local price in PA. Thank you so much 👌🏻😎

[@matt_theresacioffi7315]

Thank you, was perfect for my 2018 CX-9. Easy to follow and took me only 20 minutes to get it installed and working.

[@pitchpolefpv8971]

Happy to help! 🤓

[@JorgeMalpica]

Just wanted to say thank you for this video guide, it made the whole thing very easy to install on my Mazda 3.

[@alexmarks8285]

Couple tips. 1. Don't coil up the bunch of extra wire like that. Instead run it down the center of the harness along the path(s) that already exist and hold in place with zip ties or electrical tape. That way you don't have this big bulk of wires at each end that can get in the way and be difficult to manage. 2. Put a piece of electrical tape over the little red light if you don't want it to be annoying. 3. I was able to zip tie the module to the metal portion behind the under-dash plastic trim and make it look super clean. 4. Make sure you update your vehicle settings to unlock the doors when shifting in to park and lock the doors when shifting out of park, as well as unlock all doors with the single button press. First time I went to unlock the car after a remote start I was super annoyed that I had to go to the driver's door to unlock the rest. That would've been really annoying if I hadn't changed the settings.

[@wir3dal]

Great guide! Followed these steps exactly for my 2015 CX-5. I ran into an issue where Dcryptor said "invalid key data" the first time, but I tried teaching the EVO again with the key fob right against the ignition button and then was able to Dcrypt just fine.

[@JohnVHLife]

YOUR THE MAN! Just put this setup on my wifes 2016 CX5, and there was a couple tiny things different that it asks you in the computer setup, but it worked, you saved me so much time, thank you!

[@keithwrx8]

For some reason the Fortin guide doesn't include the first step of connecting the module and going through the menus to flash it, so I was completely stuck until I found your video. Thank you!

[@pitchpolefpv8971]

You’re welcome. Glad you liked it

[@SS-hc6sp]

Good job! Used your video as a guardrails (except went L-U-L) and you’re right, it’s plug-n-play. Works great so far. Thanks for the helpful walkthrough!

[@pitchpolefpv8971]

You’re welcome!

[@juanpalacios4622]

Do you have any issues with the radar sensor? I saw an early comment asking about it and no response. Thanks.

[@David5.Pumpk1ns]

Great installation tutorial. Performed the installation using your video. Thanks.

[@chanses2733]

Just slapped on into my 16' CX-5. Everything seemed to go well following this. Decrypter would not code, kept trying to reprogram in car, walking in and out. Was going to wipe it out and start from scratch. Then saw a post that said to just re run the firmware. Did that, and boom worked fin.e

[@pitchpolefpv8971]

Awesome!

[@ZNavy]

Fortin released firmware update for EVO One Ver 85.11, this firmware fixes Auto Hold" and Cruise Control error/problem. Updated mine on 2017 CX5 and now it works perfectly no issues.

[@pitchpolefpv8971]

Awesome!!!! I’ll go update mine now

[@ZNavy]

@@pitchpolefpv8971 , Please let me know if it works on your 2019 CX5 after you have updated and tested.

[@indyaudioguy]

Great Video! The ONLY gripe, as someone else pointed out...lose the putty knife and blade in favor of a trim-removal-tool. I am doing a 2021 CX3 tomorrow with the same hardware. I love Fortin stuff!

[@W1thRaisins]

Easy install on my '21 CX-9. Thanks for the video.

[@joshymcdaniel9233]

Got one for my 16’ Mazda 3 Programmed 1st time it is a solid unit installed it in 2017 still going strong’ picked it up for $139 back in 17’ no idea what it runs now like everything prolly double lol but anyone thinking about it it’s 1000% worth it! Especially with a plug and play harness

[@milliardygunturfrandjin9869]

THANK YOU very much ! it did worked to my 2014 Mazda CX-5 !! i’m so glad found this video. don’t know how much money could’ve spent without this Video. you’re awesome . have you done this with other vehicle ?

[@tashiphuntsok9112]

I followed exact same steps and used same products. But most of the time my cx5 2018 takes a min and some time longer respond to key remote. Do you have any explanation as for why. Thank you so much for your video though.

[@joelibarra3076]

Great video. Just got this installed on my 2021 CX-9. Video explained everything. Thank you

[@pitchpolefpv8971]

You’re welcome!

[@KorraTheFrenchie]

Funny thing! I'm doing my car right now. My EVO-ONE-MAZ3 that I ordered came with the THAR-MA30 wiring harness already! Not the jumble of cables like you had in yours. Cool. Now I can return the separate THAR-MA30 and get a refund of $65!

[@KorraTheFrenchie]

Also thanks for putting this video together! I just did my wife’s car tonight and it was simple thanks to your video!

[@donaldhunt4]

Thank you so much for the video!! Almost a perfect install, except for the putty knife boogering up the plastic cover, but if you don't care, I don't care!! ;)

[@donaldhunt4]

And my install went perfect following your video!

[@19mati67]

@@donaldhunt4 He is right, always use plastic trim removal tool. Excellent video by the way.

[@SandMbiker05]

Great walkthrough! Worked perfect on my 17 cx5

[@gregstack1506]

Great video would have never been able to install this myself, now i just need fortin or someone to figure out why i get no horn when the alarm is triggered. And with my rfk442, why can i only connect 1 out of the 2 remotes. Both Q on the fortin website. But again great instructions

[@SeanJ2A]

My Compustar is different on my Mazda 6. Once you hit the brake it does something referred to as "Take over" and you can them drive away.

[@ginnygun09]

Thanks for the video I installed it on my 2017 Mazda 6 gt.

[@pitchpolefpv8971]

Awesome!

[@mountainhigh7454]

This video was extremely helpful, 10/10....thank you for the help

[@pitchpolefpv8971]

You’re welcome!

[@rafammbass]

Pretty cool install. I do remove the unnecessary wires from the connectors, makes it even neater.

[@pitchpolefpv8971]

Yeah. I just zip tied everything but I thought about it.

[@xvi9900]

Thanks.

[@gnfanatic9139]

Awesome video, thank you so much! Is it possible to stop the car from beeping the horn twice so I dont piss off the neighbors at 4am??

[@pitchpolefpv8971]

Yes! You can change the key sequence to be lock, unlock, lock instead of lock x3 which shouldn’t set off the horn.

[@shmuelzions3026]

Great vid, however you never ever ever use metal against plastic, always use plastic to remove plastic

[@pitchpolefpv8971]

Yeah I learned my lesson 😂

[@SS-hc6sp]

I found I couldn’t get a trim tool into the crack, but if I applied some upward lifting pressure on the top of the clamshell, I could get the plastic trim tool in there.

[@charlesstoddard2458]

Instructions are right on! I could install another one in less time than it takes to watch this video. This does not show how to install the hood switch which is needed if your poking around under the hood. If you opt to go without hood switch I would disconnect the negative terminal of the battery if you're under the hood.

[@pitchpolefpv8971]

Charles Stoddard my thoughts exactly. I do most of my own maintenance so I don’t feel it necessary

[@MARIUS-CONSTANTIN]

tHANKS for sharing it with us. Now, I can't hardly wait to install my unit tomorrow ( I have the smartphone GSM antenna too :)

[@alianbaba9330]

Where did you buy yours? And how difficult the installation. It seems easy with the help of this video

[@pitchpolefpv8971]

I thought about that but I’m not in coverage area so it would be moot for me

[@apachence]

Thanks for your help on the thread. This worked on my 2015 GT CX-5. I had accidentally put my unit into special mode...that was the issue. Both keys work...no need for the 2-key setup which was much more complicated according to the documentation. This was a great video....i wonder if you can cut some of the wires from the T harness....but there is a lot of room under the steering wheel, that it doesn't much matter. I did factory keys, just remote start - no alarm.

[@pitchpolefpv8971]

Al Fredo glad to hear you figured that out!

[@tomerlevin3693]

THank you great video!

[@skasi7007]

Very informative video followed your instructions Evo One with Thar-One-Maz3 works great on Mazda 6 -2019 GT US model.Thank you for the amazing install video:)

[@pitchpolefpv8971]

Skasi thank you for watching! It was fun to make

[@d0ublethink]

Excellent work sir. Thank you

[@pitchpolefpv8971]

Thank you!

[@NedStone102]

I have a 2015 Mazda CX-5 which I will be installing this in. Fortín charges for the wiring diagram. I will follow this tutorial. Hope it works.

[@pitchpolefpv8971]

And...? Hope it helped

[@Santiagoc19]

Thanks man! Great video 👍🏼

[@LinMichael1]

hey PitchpoleFPV, thank you so much for such detailed video, just wondering about cleaning up the wires (light related). Do you happen to have a video or instructions on how to clean those wires, or if its necessary to remove the wires (I assume u had it cut or removed)? thanks in advanced!

[@walidalshabib6225]

Super Video danke danke danke danke

[@yulungjasonlee]

did u end up getting the EVO-START_LTE to add on to the EVO-ONE?

[@dennischow7773]

Just watched your video. Well done. This should work for my 2019 Signature model?

[@seeksaurav]

Hi @Dennis Chow - i thought cx5 signature models already come with pre-installed remote starter, don't they ? Or do we have to install them ourself ? Just got a new 2020 signature model yesterday, i surprised there isn't no remote start . Asked the dealer he told me i have to install it myself 😟

[@dennischow7773]

@@seeksaurav I don't think so. It was an option to get one installed. Looking to do it myself

[@seeksaurav]

@@dennischow7773 okay , thanks 🙂

[@agm130]

Just installed it on our 2019 signature and everything is exactly the same, only the mirrors unfold when you remote start it.

[@dennischow7773]

@@agm130 easy install?

[@battelio296]

Did anyone install the valet button? It came in the box with my EVO-ONE, I am not sure if I need it. I will probably install the Hood pin in the summer, just in case...

[@AB-zc6tb]

Hi. Thanks for taking the time to make this video. Did you have to connect the hood pin switch? I mean is it necessary for the remote start to work?

[@SS-hc6sp]

It’s not required whatsoever. You can throw the hood switch away and this will work just fine. If you absolutely want to use the hood switch, you’ll have to run a wire through the firewall or find another way to get the wire from hood into cab (frame?). Summer project.

[@AB-zc6tb]

@@SS-hc6sp Thanks for taking the time to reply. Much appreciated.

[@faizikhan007]

Guys maybe I am missing the whole point of the remote starter but what's the point of installing a remote starter in the first instance? I can always start the car after getting in as normal hence I don't see any real benefit at all but happy to be educated please.

[@Pandasmiles12]

Thank you so much. I am going to buy this.

[@pitchpolefpv8971]

Totally worth it

[@yhk8625]

Hello, greetings from Mexico! Very informative video. Would this work for my 2020 Mazda 3 hatchback GT?

[@MrJniede]

Is this compatible with 2024 mazda cx-5?

[@elquco]

Good video , I have a cx9 gt 2020 I found the fortín one for my truck would the DIY be the same you think on my truck

[@sushantacharekar]

Thank you for this detailed video .

[@pitchpolefpv8971]

You’re welcome

[@l2string]

Excellent instructions! Does the Flash Link manager 4 load up on the laptop screen when you plug the Flash Link module into the computer or do you need to make an account at Fortin first?

[@pitchpolefpv8971]

I believe I had to make an account first. This was my second install so I didn’t have to do that in this video.

[@mvalkenburg]

I just ordered the same complete Fortin set. My new CX5 will arrive in March, so I can start installing it right away thanks to your perfect install video. Do you have any tips on how to get rid of all the cables? And another question, is it also possible to turn off the horn when starting it remotely? Thanks again for this video...

[@SummaVanthen]

I haven't been successful with an Evo-All installation (on my 2016 CX5) so I'm considering Evo One as well. But I do know that the FlashLink Manager gives you a bunch of different options for turning on/off the alarm etc. I think there's also a Lock-Unlock-Lock option (instead of 3x Lock) which means you won't have the alarm. See if this is useful cdn02.fortin.ca/download/68731/68731.pdf

[@sycro1365]

Does it work with mazda 6 2013 skyactiv 2.2 129kw MT? I would like to get the renote start option and leaving home lights. Does the harness fit on my car?

[@alexmarks8285]

Do you have an EVO-ALL video, or is there a real reason to get EVO-ALL or EVO-ONE?

[@mirooovuujjj7918]

Wow. The best video. Thank you

[@pitchpolefpv8971]

You’re welcome!

[@MegaPhilQc]

Do you have tested the turbo mod mine don't work

[@j.w.8663]

Excellent video, well described. Tell me, how come you didn't need to program the Mazda OEM keyfobs? I saw another video where you need to place the fob on the push-to-start switch and push the start twice ! ?

[@SummaVanthen]

that's the specialty of the Evo One where you don't have to do that. I think you still have to have atleast one key in the car as shown here kzbin.info/www/bejne/g3Lam4qHrJaAZpo

[@pitchpolefpv8971]

J. W. Vid is correct below.

[@adieognira9709]

How do you keep the parking headlights on when doing remote start?

[@G2GX]

Thanks for the detailed video. I’m wondering, I have heard that with fortin the smart radar cruise control is not working when you remote start the car.. you need to stop the engine and start the car normally with start button. My question does your radar works when you remote start the car? Or you need to switch it off? Appreciating your kind support Wish you the best

[@donnkarlo1]

Hi, thanks for your video i was able to install one on my cx5 2016. The only issue i have is that after the car was started remotely and i press the start button, the car still turns off after i hit the brakes. Any work around this? Thanks

[@pitchpolefpv8971]

DKStreetBMX that’s an interesting one. I would reach out to Fortin support because that sounds like the override isn’t programmed correctly. You might try reflashing first.

[@abdulaziz77222]

Good evening my friend I have a Mazda CX-9 2017 This feature does not work for me OEM ALARM And secure doors What is the problem? Please help me

[@johnnycincocero]

How long will the engine idle after your remote start it? Will it eventually auto shut off?

[@Thumpjimmy1]

Where did you buy the unit(s)? Fortin's site will not allow me to buy the T-harness.

[@devine4k460]

Will it support 2021 Mazda cx5 model?

[@dariog3038]

Question: I’m thinking of installing this on my Cx-9, but it already has the factory remote start with a separate remote…which is a drag, thus the consideration for this option. The removal of the factory one and basically a swap for the new one shouldn’t pose any performance issues, right? I just don’t know how the factory one is integrated, but wondering if it’s similar to evo or generally all remote starts?

[@pitchpolefpv8971]

I would double check with Mazda on that.

[@giotenerelli5367]

Thanks for the detailed video. I JUST ORDERED MY EVO 0NE AND THAR-ONE-MAZ3 FOR MY 2014 MAZDA 3. DO YOU KNOW IF THERE IS A WAY TO BYPASS HAVING TO INSTALL THE HOOD PIN SWITCH????? (SORRY FOR THE CAPS)

[@pitchpolefpv8971]

I didn’t do the hood pin install as I figured I’m not going to accidentally hit the lock 3x while working on the car

[@knarfluna]

so...2018 Mazda 3....this setup would work? You say one key programming.....I assume both keys that came with the car are considered 'one' key?

[@pitchpolefpv8971]

Correct. It uses the factory key or keys

[@aloobi]

What happens if you remote-start your car and keep it idle. Will it automatically switch off after a while? This is important because you may accidentally remote start your car without knowing it.

[@JonathanRogler]

Usually switches off in 10-15 minutes depending on starter

[@ZNavy]

Did you lose any features by disconnecting battery like memory seats, stored stations on the radio or stored routes in the navigation favorites and had to reprogram them again?

[@pitchpolefpv8971]

I haven’t lost any of that no. But I also don’t use the FM radio or the Mazda navigation since I have CarPlay.

[@ZNavy]

Thanks for reply. I have installed EVO, also did not loose any features also installed CarPlay upgrade (my 2017cx5 did not have it) I like CarPlay a lot .

[@jremaine1]

How is it holding up so far

[@EBnoonngayon]

Thanks for the video. I notice you didn’t show the valet button and hood pin safety connection. Did you not install it?

[@pitchpolefpv8971]

Ashley Yeetie since I have valet parked once in my life and do most of my own maintenance I decided not to.

[@johnsquints1023]

Just curious why I would spend so much on all the components and install it myself when I can just go to the shop and get one installed for $200?

[@ZNavy]

When your CX5 is started via EVO one does your "Auto Hold" and cruise control working or displaying any errors?

[@pitchpolefpv8971]

I’ve had them sometimes but not others. I can’t figure out what triggers it to not work. What I typically do now is remote start and then hit the brakes when I get in so I have to restart it. Probably more work on my starter but a 100% success rate on cruise and auto hold working if I do that.

[@ZNavy]

Thank you for your reply. Maybe it’s better idea to enable option in EVO to shut the car off on door open?

[@barrysiffredi3600]

Hi, my factory alarm doesn’t seem to be working. Do I need to connect to the headlight switch for this? I just hear a clicking sound from the evo one when trying to open the door from the inside with the system armed. Thanks

[@pitchpolefpv8971]

I’d recommend reaching out to support at fortin.ca since I’m not affiliated with them at all

[@gregstack1506]

@barrysiffredi3600 any update on the horn working when the alarm is triggered

[@barrysiffredi3600]

Ya I think on my 2017 I had to splice into the horn wire separately. I believe it was a blue wire in the steering column if I remember correctly.

[@gregstack1506]

@@barrysiffredi3600 Thx. Yes figured it out last weekend. Had to connect the orange/brown wire from t-harness to a light blue wire in the steering column in my 2021

[@MellowMadnessRMX]

Is it compatible with a 2016 model??

[@pitchpolefpv8971]

MellowMadnessRMX it should be. www.fortin.ca/ Check out the vehicle finder on the left side.

[@ralphanthonymolera7010]

Does this also start the AC controls in which it will automatically start it? Useful for winter.

[@pitchpolefpv8971]

It will revert to last used settings. So you do have to remember the time before you shut it off to set what you want next time.

[@low187urass]

will this allow me to still open my door with the key fob or will i have to insert the actual key in the door to get in..... the oem is set to disable the keyfob functionality once the car is on so im wondering if this would be a viable option... i have a base model 2016 maz 6, so no proximity sensors or buttons on the door handles

[@pitchpolefpv8971]

I’m not 100% certain. My Mazda has the buttons which I always use so I’ve never tried the key fob. I’ll try my key fob sometime and let you know

[@low187urass]

@@pitchpolefpv8971 thnx for the reply i would greatly appreciate it if you would....

[@popscilepoopchute]

@@pitchpolefpv8971 DId you ever try this out?

[@fluffymyster2]

What is the range for the remote start

[@spoon-6914]

Does this bypass the locking system, so that you can lock the car while it’s running

[@pitchpolefpv8971]

It does not

[@benendraprasad7026]

Hi there can i install this in cx8

[@priyamisra5805]

If I buy the three products listed in your links and follow this video, is that everything I need?

[@pitchpolefpv8971]

Yes ma’am it should be all! Make sure you check compatibility on fortin’s website

[@Twizyler]

I have this for a 2010 Nissan Maxima would it be the same?

[@pitchpolefpv8971]

I would assume the general install is the same. Did you double check on fortin.ca to make sure you have the correct module and harness?

[@Twizyler]

@@pitchpolefpv8971 yeah I'm a Nissan tech too so you'd think I'd know this but as soon as I see a slew of wires I'm like rip so but yeah I'll check that last time I looked at all this was a year ago I just kept putting it off 😂

[@joejones5653]

Do they offer an option for a Fortin remote start fob with a 2 way or long distance remote start?

[@pitchpolefpv8971]

Joe Jones I think so. Check out fortin.ca for their product list

[@bril6157]

anybody know what kind of range this has? like do you need to be insight of the car?

[@pitchpolefpv8971]

It uses the factory remote so whatever range you have with that. Mine works inside the house for when the car is in the driveway. You can upgrade to a longer range transmitter. Check out the options here fortin.ca I just chose not to because I don’t like carrying multiple fobs and there wasn’t a time I felt I need long range

[@jmeneses3087]

How much do you charge for the installation? I'm here in Chicago.

[@pitchpolefpv8971]

I’m sorry. I’m not an installer. Did you find one in Chicago?

[@ahmdovi9996]

thx aloooot

[@pitchpolefpv8971]

Welcome!

[@nhuantrimax9861]

Hello friend,is it required to have a technician account to log in and flash the firmware ?

[@pitchpolefpv8971]

No they software is free to the public

[@barcea2011]

Does evo one works in Michigan?

[@pitchpolefpv8971]

I’m assuming you mean the cellular feature? I’m not sure you’d have to check with Fortin

[@fluffymyster2]

How is everything working so far after the install?

[@pitchpolefpv8971]

Everything is good still.

[@ricoorosco2686]

Will it work for mazda cx5 2014?

[@pitchpolefpv8971]

Yep. Looking at Fortin.ca website checker the evo-one and the thar-one-maz3 are the right equipment.

[@brotiger8071]

Can i make the turn the AC on ?

[@pitchpolefpv8971]

You would need to set it that way before shutting off the engine the time before.

[@bombasefamily4170]

Will this Evo one work to 2020 cx5? Thanks

[@pitchpolefpv8971]

Check Fortin.ca for their compatibility checker. Nothing changed in the new 20 AFAIK.

[@ManiDeep0000]

It did work on my 2020 CX5, i ordered EVO one and programmed it. Works fine. I think from 2021 models the harness and wiring changed(based on my research from fortin.ca)

[@johnnelson9742]

I followed every step and can't seem to get it to work, wtf

[@pitchpolefpv8971]

On the second one I did, I had to follow the flashing procedure twice. Try hooking it back up to the computer and starting there.

[@michael161163]

will it work for a 2015 Mazda 3s

[@pitchpolefpv8971]

Looks like it on the compatibility checker at fortin.ca

[@MazdaConnectClub]

How much ?

[@pitchpolefpv8971]

I think the evo one was like $80, the harness was $50, and the flasher was also $50

[@MazdaConnectClub]

@@pitchpolefpv8971 i don’t see link products ! Plz hepl me ! Many thanks !