Remove steering wheel, airbag, clock spring: Ford E- series (E150, E250, E350) 2014 and below.

Buy me some beer!
square.link/u/VyHD7JpV

[@nickk3765]

Pro tip: put the bolt for the steering wheel back in loosely before you smack off the wheel so it doesn't fly into your face.

[@sambo2994]

You said to remove negative battery cable. Sooo why did the flashers start working

[@MACAVILLA14]

You saved my ass with this video on my work truck I told my work I had it covered but in reality I had no clue wth I was doing thanks dude

[@Mil-usos]

lol Hell yeah!

[@throwaway-hp1wt]

Im in this exact position as I write

[@jamesconley9753]

@@throwaway-hp1wtdo you have a part number? Is it only available through Ford? Thanks!

[@XchinabearX]

You're a life saver. Can't wait to do it myself tomorrow

[@cam-pact]

That disclaimer got me 🤣🤣👏🏼

[@prw427]

Great video there. I will be doing my own soon. Thanks for the help In advance.

[@abelflores3752]

Always remember to disconnect the negative side cable on the battery before you start

[@cassiogalvao]

I bought a E250 2007 and would like to know if the 2010 steering wheel works?

[@user-pd8vy6qn2l]

What about the blue wire with the brown clip looking thing it’s in the back of the spring

[@mikeandsheilabueche1433]

Do you remember where you bought the replacement clock spring? Thanks!!

[@sethdawg]

Could a leak in the roof near windshield on drivers side be a cause for the clock spring to go bad?? Notice it dripping after a rain storm dripped right on that area. I just bought this van realized the horn isn’t working thinking could be this. 09 e350

[@lalodelgado7692]

Muchas gracias senor..

[@rev.lazarus906]

how many miles is this van have when you did this job?

[@snakebite3299]

Did a gearbox on an ambulance and accidentally moved the steering wheel when i replaced it. Needless to say when I went to bleed the power steering, the clockspring popped. Always put the seatbelt through the steering wheel when you do a gearbox!

[@TLee-kt5ff]

So you don't have to remove the key mechanism like in other videos I'm seeing?

[@Mil-usos]

I briefly reviewed the video to refresh my memory of this job. No, I did not remove the key mechanism. Read through the comments, and you'll see others have had success following this video. My only "change" I would edit is a better steering wheel puller instead of the hammer I used. Best of luck!

[@hoogooooo]

nice jop

[@americanwhiteboy715]

Please be careful doing that it would really suck for that thing to come loose and smack yourself in the face 👀🤣

[@YelaDuck]

Nice m an