Remove The Clutch Cover | Engine Right Side Disassembly | STAGE-1A | HONDA INNOVA GARAGE

Honda INNOVA | ANF125i | WAVE | Engine Right Side Disassembly -Stage1A
The Right side - Remove the clutch cover:
1. To do list 0:08
2. Remov all covers 0:13
MAIN Covers: • Covers (1of3): MAIN Co...
HANDLEBAR: • Covers (2of3): HANDLEB...
Rear BODY covers & Grab RAIL: • Covers (3of3): Rear B...
3. Disconnect the battey negative lead 0:13
Battery - checking, charging, and replace: • Battery - checking, ch...
4. Take photos for documentation 0:26
5. Drain the engine oil 0:32
Engine Oil: Oil Change: • Engine Oil: Oil Change...
REF(12,000Km): • Engine Oil: The Oil Fi...
6. Look if there are suspicious deposits in the oil 0:50
7. Clean the engine 1:29
8. Remove the kickstart lever 1:42
REF(12,000Km): • Engine Oil: The Oil Fi...
9. Remove the rider's footrest 2:28
An underbone motorcycle: • An underbone motorcycl...
10. Remove the exhaust 2:06
Exhaust (Muffler) - removing & installation: • Exhaust (Muffler) - re...
11. Remove the clutch cover 2:37
REF(12,000Km): • Engine Oil: The Oil Fi...
12. Check the clutch brake pads - PLATE COMP BRAKE 22850KPH900 2:53
13. Check the strainer for suspicious deposits 3:08
REF(12,000Km): • Engine Oil: The Oil Fi...
14. Bonus - Kickstar Lever: cleaning and grazing 3:42
REF(12,000Km): • Engine Oil: The Oil Fi...
**********************************************
MyINNOVA MASTER Garage D.I.Y series | My Engine Bearings Replacement Project
• MyINNOVA MASTER Garage...
My full D.I.Y series Video for Motorcycle self mechanic jobs - Service guide And Repair manual:
• HONDA INNOVA GARAGE | ...
**********************************************
MyINNOVA motorcycle Souvenir Shop:
teespring.com/...
DONATION to production an original videos in my KZbin channel. Thank you very much!!!
www.paypal.com...
**********************************************
This film is for professionals only הסרט הזה למקצוענים בלבד
אין לראות בחומרים הנ"ל המלצה לפעולה או תחליף לביקורת במוסך במועדים שקבע היצרן או מכל סיבה אחרת. השימוש בחומר הכתוב, המצולם ובקטעי הוידאו, הוא באחריות המשתמש בלבד. עבודה על האופנוע יכולה להיות מאוד מסוכנת ולהסתיים בפציעה קשה, תאונה אחרת, אפילו מוות.
These materials should not be considered a recommendation for action or replace the garage at the times prescribed by the manufacturer or any other reason. Use of the text, photographic and video clips, is on the responsibility of the user. Work on the bike can be very dangerous and result in serious injury, other accidents, even death.

[@pasdutout4690]

Hi Tamir. I'm from Canada and a big Israel supporter. Came to your vlog in search for info on Honda's silent clutch sub-gear, which I couldn't quite figure out. Now I know how it works, thanks to one of your videos, thanks ! Shalom and ride safe.

[@MyINNOVAMotorcycling]

Hi Canada, Thanks for your support. I'm glad to hear you like the content I upload to my channel. Safe riding and goodbye from Israel

[@mehmedhanyildiz3786]

Bende türküm ve büyük bir filistin destekçisiyim sen ve senin gibileri lanetliyorum

[@Tylskiu_pranik]

Крутое видео. Нагар жесткий внутри двигателя, масло нужно чаще менять👍👍👍

[@MyINNOVAMotorcycling]

Вы очень правы и спасибо за добрый совет. В моем случае масло не вытянуло все алюминиевые стружки из двигателя, и подавляющее большинство осталось в двигателе (по обе стороны от фильтра). [Google Translate]

[@alexkolyshkin1658]

климат тут такой , это не нагар , синтетика коксуется, самураи рекомендуют 10w40 оно чернеет через 500 км. пробовал мотул 10w50 не многим лучше, В кабе там МС10 сезон держало .

[@rainiercortez5038]

@@MyINNOVAMotorcycling @@

[@yuvalsmadja6437]

איזה סרטונים אלוף , כי לראות

[@MyINNOVAMotorcycling]

תודה רבה!

[@mechanic3d]

A perfect do it yourself video

[@Aleksey_Deryabin]

Подписка 👍

[@herbertkunze3610]

Great Video. Thank You!

[@punjirivlogs5511]

Nte byke nte clutch cover bolte oke azhichu pakahe clutch cover ilki varunilla athendanu

[@blauerplanet8009]

OK, OK, OK, but how to remove the right cover when all 10 screws were removed ? Nothing happens I can do what I want.Incredible, I only want to clean the oil centrifuge and have to remove the whole motor cover. Under the litlle cover with 3 srews there is no acces to the centrifuge, Are they crazy to build such a nonsense ?

[@MyINNOVAMotorcycling]

It is what it is look this vid: kzbin.info/www/bejne/a2qtfnmigJl5aJo

[@MyINNOVAMotorcycling]

Maybe you should also consider testing this pad as well: kzbin.info/www/bejne/in6cXp9perqFrKc