Removing 400 transmission bell housing our way.

Removal of 400 tranny bell housing, installing 2 different style's of performance bell housing's.

[@Anthony-nw5zv]

Richard I was just scrolling through KZbin looking for new videos from Precision Transmission and Ta-da your new videos came up and I enjoy them too. I still like the old ones but I don't think I've saw them all 😊

[@adrenalinejunkie126]

I built my TH350 in my race car using some of your tricks and modifications, and it's still going strong 2 years later. Thanks !!

[@ratboyiscool]

This is Richard back at ya! Love watching your teardowns

[@jeremiahnewell]

My day got a lot better with that "back at ya!" Thanks for Uploading!

[@WreckDiver99]

Richard and Teresa, so glad you and Trent were able to work things out. Never good when things like this happen. Always learning from you Richard. I'll NEVER do this work, ever, but the knowledge is awesome. I can walk into my local shop and actually understand what they are talking about, and even ask knowledgeable questions. Matter of fact, now that I found a reliable shop I found that they follow your page as well. :)

[@justinpedalpusher]

Thanks for the explanation although you don’t owe it to us. It makes perfect sense. Build the transmission perfect for the people. I’m just grateful to see the teardowns and the tips you include about what to watch out for and what to go back with. Thank you for providing all of this information to us for nothing.

[@kwinterburn]

I found the new channel when you started , great to see the old channel and you have sorted everything out , it's never worth falling out

[@Blackhemicameron]

I kept tearing up transmissions in my C-10 back in early 90’s , Papa said son you keep tearing them transmissions up you gonna learn how to build’m cuz he was tired of helping me after the 5th time …. One of the many best thangs Papa did for me ! I miss him somethin bad !! But I got skilled at TH350’s . Got them thangs to slap !

[@JohnMcCullough-wr9hj]

So glad all are doing well!

[@Conwayfreeky]

I ran multiple zsk embroidery machines and Montana ski tuning machines. Before that I worked loading and unloading large pottery kilns. Love this info on transmission building.

[@dorhocyn3]

I have been a master tech for over 30 years, certified in Transmissons also, still, automatic transmissions, are my Achilles…. but this guy is amazing, he has no fear, all knowledge!!!

[@CORVAIRWILD]

We're off ta Las Vegas in a few hours, buying a '98 Dodge 2500 4x4 pickup, and heading east. Wish us luck!!!

[@robertwetherington3372]

Love you're videos and the knowledge you have on everything. 20 years ago I built a car and there was know one in my area that could build a tranny. I bought one from ATI cost 800 bucks back then and I have never had a problem with it. 565 ci 828hp to the wheels 5.32 135 in 3400 lb car. Now I can't imagine what it is gonna cost if I replaced it. I wish you were in VA

[@kennethperian4370]

Hello transmission man, great job your doing you look like a professional working on them transmission. I have a if we can get together on its a 1977 turbo hydra magic PA got 144 miles on it i wood love to see what it looks like inside and upgrade it with the new stuff you think wood make it better it did great when I stopped driving it in 1993 have not used it cents stays in doors I just looked at it, give me a call let me know no hurry just whenever you want to. Well keep on working on them transmission and have a great one and happy Christmas and new year see ya bye.

[@dustyflair]

Whoever invented the AutoTranny was one smart SOB!

[@davidhudson5452]

Nice Richard stay warm

[@HYBRIDEVMASTERSGARAGE]

Business 1st. Focus and Precision = Expert Services to the Clients 🙂 thanks for Sharing Your Content,

[@davebowen3441]

There still a lot more to putting them together then what y’all explain when yall tear them apart. That’s what we want to see. We understand it’s a customers vehicle. You are the go to source for problematic issues with transmissions. But seeing you put them together would be great to see. We all could benefit from that, taking your expertise and carrying it on

[@20havenfun08]

Thanks again... Love the videos:) Miss the boys, thanks for the updates.

[@cS-nf2dg]

So glad to see you guys back !

[@RobertWelch-fs2fv]

Fantastic videos ! Mr' transmission. And. Teresa 👍👍👍👍👍👍👍👍👍👍 Boston wise guy 🇱🇷🇮🇪🦉

[@gunnerneikoify]

Love your videos, but think you're missing out on a HUGE HUGE HUGE potential audience of viewers and EXTRA subscribers that are wanting to see actual "build" videos.

[@prnd21turbo]

Absolutely agree with you. The build would be incredible.

[@shadowzero313]

after that intro i bet some hero will pay extra for it

[@sorenjorgensen5334]

I´m sure they´ve weight up the pros and cons of doing that.

[@laytonturpin864]

Powerglide builds would be awesome!!!

[@hammerdick82]

With build videos comes nothing but questions and complaints when people invariably screw up and blame him.

[@mwalker9401]

First I've heard of the "Richard and Teresa" channel, but I just subscribed.

[@markahad6583]

Richard, you not gonna reuse that yoke? Then the ‘yoke’s on you! 😂😂😂 (love you guys).

[@Bugsy0333]

Great mechanic wish he would produce videos more on a regular basis !

[@jamesragus1577]

Such an educational experience, that’s why I watch! I’ll look up the other channel, see you there!😊

[@6181green]

I finally found the new channel I didnt know nothing about it shoot I just realized yall were back posting videos last time I checked yoir channel it bad be3n a long time since a video had been posted glad to see yall back 👍

[@davidwood351]

So true, I never knew about the other channel. I am subscribed now.

[@hammerjim19741]

Lol, i found the educational channel after precision went away. Im stalking yall...lol

[@bryantmoore7998]

You helped me so much thank you.

[@alanblyde8502]

Those are a thing of beauty👌 We call those Flap discs (for buffing up)🇦🇺

[@CORVAIRWILD]

1st sweet fall weather view!

[@Rubbinbhudda]

Set up a camera above Richard looking down on his build table and tape a complete build then speed it up when you post it. That'll keep em happy and you won't be bothered.

[@mikemaki1104]

I'd like to see one on you putting it together!!!?

[@Trigger_32]

I figured you didnt do build video's so nobody actually see your secret sauce... but I've been pining for a build video ever since I found your OG channell

[@InsideOfMyOwnMind]

After your explanation I appreciate even more why you don't do builds on camera. I am wondering though, if you could just throw up a cam or two and maybe voice over it later? Not something you could or would do often but maybe once in awhile. I would love to see what you actually do behind the curtain to a 4L60E.

[@jjbjjb3776]

I hadn't seen u on my u tube feed .I enjoy them.

[@joeubele]

Love your videos

[@shadowopsairman1583]

Richard and Theresa Educational Videos

[@mikeh6876]

Well, you need to post the address of both channels under the video post under the "more...". I am subscribed on both but this video is only on the Precision Trans channel.

[@ronbonick4265]

my favorite channel

[@HamRadio200]

I do not get notifications on the Richard and Theresa educational videos channel. So I just watch them here.

[@patrickmazzone9066]

awesome never thought they did these tricks to auto trans awesome!

[@artgoat]

As my dad always used to say "There's nothing between Amarillo and the North Pole but a couple of barbed wire fences-and one of them is down!"

[@super7three262]

With the seal in the yoke is it a bad idea to use the oring still for extra protection I guess?

[@dgmcke3074]

Love ur videos

[@jeffboyer8214]

Sharp job right there .

[@clist9406]

Wow , nice work

[@bigcharliesmodelgarage296]

Put a link in description for your other channel please

[@autonomous_collective]

Nice tips!🏁

[@Pete9999100]

I have 2022 ford edge 2.0 tutbo. I change the transmission fluid (ulv) every 8,000 miles. Just for preventive maintenance. I change the engine oil and filter every 3k miles with mobil 1 full synthetic motor oil. I flush the brake fluid every 6 months or 50k miles.

[@AQWbladefire]

Richard, you need to add a link in the video like a pop/up or even in the description then mention it in the video to remind them to check the link to your other channel or whatever you want to show us!

[@shadowopsairman1583]

There are plenty of build vids, people can use Sonnax parts where necessary

[@sherwinstaudt1881]

Must be an old video I'm here in Texas and it's not cold at all. Put a Powerglide in that S10 and it'll run faster.

[@jimmartin9440]

YOUR THE BEST!

[@Butchsiek]

Here is an interesting idea. Do a video of rebuilding, But, Don't say a word during the taping. The cameras can be fixed and filmed at different angles.. Afterwards while editing the video you can explain what you did. As in narrating your work.

[@joeyacca63]

Absolutely intriguing so mesmerized with the details and explanations… have a 20 yo TH 400 gonna need work, how do we contact you? Or should I say are you open for new clients?

[@petenice2956]

Id love to see the rebuild

[@treyreed1762]

i like the 2nd gen f body,thats my thing.

[@richknudsen5781]

Hey Rich, maybe you should have Payton pick out the case so you can be sure it has 8 bolts,,,,,,, LOL.

[@ice4278]

What options should be done to keep a 400 transmission from leaking when it's sitting a long time

[@CharlesM-hq6cv]

Great idea, but does that make him liable for our mistakes?? In our DIY builds??

[@garymckinziejr7194]

How many gallons of oil per btu is a good estimate for the furnace? Trying to figure out what I’d need to run an oil burner.

[@ramongonzalez2909]

Do you recommend doing an oil change on a cvt transmission with 150,000 miles

[@PrecisionTransmission]

Yes, definitely just use OEM fluid

[@ramongonzalez2909]

@ thank you much!

[@justinrasmuson]

I’m subscribed to both your channels but KZbin usually doesn’t show me your other channel I have to search for it.

[@Reaglesracing44_]

are the front seals the same on all 400’s? mine is leaking behind the torque converter

[@alvarsdzenis4739]

Is there a way to tell which cases are 8 bolt from the outside?

[@r3d1911]

new sub here this is one bad MFR c7!! did you convert to port injection over the direct junk on the stock setup? some run side by side port and direct.

[@DavidConnot]

Thanku

[@leesanders8824]

Question Richard..... What would make a manual 400 whine in first gear? It's a stock type rebuild basically with reds and altos and a bte valve body. I'm glad you got precision transmission back but after I found your new channel I subscribed to it as well.

[@sqr2024]

As a 400Th user how the heck do you keep these transmission dipstick tubes from leaking at the case?

[@SK-tr9ii]

Where is the link to the other channel?

[@dansmith-kd8wz]

Just drill and tap that case .. better money later.

[@richardharris492]

Link the other channel in the description below

[@yourpcmd]

Since a TH400 and a 4L60E are the same length, which would be stronger and more cost-effective to build for between 500-1000HP street strip LQ4 LS swapped 1991 S10? Any idea about the cost? Also, Yelp has you as a closed business, is that true?

[@josephd.4890]

If someone can link the 40 mtorsports page, I'd be appreciative. My dumb axx can't find it😵‍💫

[@harleye1235]

How do I go about getting info from you, I have a transmission I'd like to send to you. When I saw this video I almost thought that was my car on the lift! 😂 I've got a firebird I'm working on. Would love for an expert like you to fix up the transmission in it

[@leonardzielewski2744]

Trent no longer in the shop?

[@Arthur-ke9vz]

Why isn’t there a link to the other channel on here?? Hello???????

[@foamyzvideos2617]

Nice trans am

[@bryontharp5790]

I wanted to bring my transmission there for rebuilding 6L90 but I couldn't afford to transport the truck all the way to Amarillo

[@jpthedelawarebeeman7887]

Post the 2nd channel in description please

[@TomJordan-e5s]

I substituted 😊to the educational so I’m on both

[@TINKERBELL-c5v]

THE THUMB 👍🤭🤭🤭🤭🤭🤭🤭🤭

[@Arthur-ke9vz]

Winter?

[@jynxclover]

I know this is a stupid question, but do you mess with the 42re any? I've looked thru your videos, probably overlooked it..but anyway, I'm not having problems, but if ever I do you're not that far from me in sw Arkansas. You'll be my first choice

[@yoosrid]

Cool

[@juniorwhelchel6337]

Where are y'all located

[@peted5217]

Are GM autos the only units currently used in racing ?

[@JustTryingToInnerstandYou]

Can y’all help me with a rebuild if I send it to you? Would love to get your help. I have a C10 ‘80 Cheyenne with a factory 350 Rocket with 350 turbo from factory swap at GM. Nobody around me knows what they’re doing with this tranny and I need it built for a truck not a car after watching your 350 tear down rebuild video. Thank you!

[@brvfd822]

I still wouldn’t attempt to rebuild a transmission without following you, because of the clearance issues with bearings and clutches. I wouldn’t want to screw that up.

[@miked.7555]

How do I reach you to have you work on my 6l80e?

[@Trustyconsultinggroup]

What state are you located in?

[@gregjohnson2073]

Why cutoff the old bellhousing?

[@davidtoups4684]

NHRA rules require that the bellhousing meets a certain SFI spec (See the label on the new one) that will contain the shrapnel if a converter explodes. Since most automatics (Except the Ford C4) do not have separate housings, the stock one has to be cut off the case so the new one can be installed

[@rtz549]

WD40 also supposedly works good for cutting aluminum.

[@DreadlockSaiyan]

Oh I was first !?no way let’s go Richard!! 🛠️

[@jeffmentzer6550]

when can I send you my 700r4?

[@jn1ty]

Not to sound stupid but why cut off a Chevy bell housing to put a Chevy bell housing back on? I would understand cutting off a Caddy or Olds but not Chevy to Chevy.

[@Akazhnter]

Better machine that case and put 6l80 snap ring for the intermediate clutch. Case will break when that snap ring blows out

[@bruceshenkel6991]

I see your address at 300 Ross Street in Amarillo Texas is permanently closed. Did you move, or shut down your business?

[@KevinBambrick-qm7nx]

Great learning videos! 🖖