Removing Headlight Assembly From The ZX10R

[@robmuhfacka5986]

This was the most instructional video on how to remove those lol especially the front cowl. The first time i removed my fairings i did it backwards i thought the nose cowl had to come off last!

[@ModdingAddiction]

That’s the same thing I did when I pulled it apart the first time haha.

[@RealFreeGary]

I have a crack in my fairing near my mirror and was about to take the whole front fairing off to do the repair. This was much simpler! Thanks!

[@413_RYDER]

There should of been 2 Phillip's screws on the inside for the nose fairing removal as well.

[@jontaylove25]

Definitely was almost broke my farings until I found the Phillips holding it together

[@andyodab]

Yup mate, there's a Phillip's head screw on each side above/behind the headlights that hold the top, middle section fairing that need to be removed. You'll be there a long time if you don't remove these huh lol

[@RealFreeGary]

Found them. On the inside just below the edges of the tachometer. Thnx for the heads up

[@liu3kang]

Fourth gen Ninja?

[@ModdingAddiction]

You bet 2013

[@liu3kang]

@@ModdingAddiction I have the exact same one.

[@slickwilly6868]

Didnt show the finished product. Fail!!!

[@faint442008]

I'd rather just pay someone than take the entire front end off for a couple headlight bulbs

[@ModdingAddiction]

The head light bulbs are cheap and you don’t have to take the front clip off for that. This is to remove the front headlights to bake and paint them. Well beyond the realm of just changing light bulbs