Removing Mid Mount Mower Faster on a Kubota B2601

[@ndipuppo]

Hi Mitch. Your process makes it easy to detach and reattach this heavy deck. Great stuff. I Just took off my MMM and the PTO shaft came apart as I set it upright on the dolly. There is a very small tack weld on the spline of the male end that prevents the PTO meshing back together with the female end if it isn’t lined up correctly. The ends should slide smoothly together. If not the splines are not lined up correctly. Don’t force it. I couldn’t see the weld until I cleaned the grease off the shaft. Thanks for all the great B2601 ideas. Cheers.

[@MJADoingStuff]

Thanks 👍 I am going to pin your comment on top so everyone will be able to see your comment first. This is great information. I myself haven’t had the PTO shaft come completely apart yet but now I know what to do thanks that’s awesome. From what I have gathered if you store the deck on a vertical dolly over time and low temperatures it can leak out of the input shaft. Just thought I would share that too. Thanks for checking out the video and Have a great week😁👍🚜💨💡

[@MowersFamilyFarm]

oh dude the intro was awesome and then bam you hit us with the sped up talking awesome way to start buddy!

[@MJADoingStuff]

Thanks Pete!! It was all about doing it faster 🤣👍🍻

[@ritterjon]

💥 Loved the sped up voice and dramatic intro music! 😂 Great how to video! *Keep on tractoring!* 👍

[@MJADoingStuff]

Thanks Jon👍 I’m trying my best one day I will figure it out 🤣👍and be as good as you 😁

[@RossOnTheLand]

Very nicely done! Thanks for posting this. Love the ending. 👍

[@MJADoingStuff]

Thanks I cut it short cause it is all about doing it faster 🤣👍🍻

[@terryk3118]

That was fun to watch even though I don't own a mid-mount mower!

[@MJADoingStuff]

Thanks Terry K. I had fun making this one : )

[@PetersonFarmsofNashvillePFON]

Great Video Funny Thumbnail 😂

[@MJADoingStuff]

Thanks Phil. I got grease on my shirt doing this.

[@6DOutdoors]

GREAT JOB Mitch. Very cool intro. I have a mid mount mower as well and this is the first time seeing it removed like that. Never would of thought. Thank you for the tip. Keep up the awesome work. Videos are getting better each time. I picked up on a couple of your pointers here. Take care and all the best.

[@MJADoingStuff]

Thanks Kyle👍 I am trying to get better a little at a time ☀️😁👍

[@100InchHammer]

Best video on my tractor yet. Ty

[@MJADoingStuff]

Thanks 👍 My tractor 🚜 does double duty so had to find a Faster way. Thanks for leaving a comment 😁👍🚜💨💡

[@100InchHammer]

@@MJADoingStuff mine too.

[@AkDadStuff]

Heyhey Mitch I never thought of that. Thats a good tip. Thanks

[@MJADoingStuff]

Hey Mike I remember you being worried about driving over your mower deck😂now you don’t have to Have a great New Year😁🚜💨👍

[@OrangeismyNewGreen]

Funny 😂😂👍🏻. Cool way to remove the deck Mitch, never seen it done that way 👍🏻, have a great week 🙋🏼‍♂️👍🏻🙂☀️

[@MJADoingStuff]

Thanks Luc you too ☀️😁👍🙋🏻‍♂️

[@PurpleCollarLife]

Really great tips!

[@MJADoingStuff]

Thanks Chad!!☀️😁👍

[@tractortalkwithgary1271]

Loved the intro Mitch. Had me cracking up. This was a lot of fun even if it weren't so informative. I would have used 8x8's, but that's me . No wonder they call me "overkill"

[@MJADoingStuff]

Thanks Gary! Just trying out some different ideas😂 I am glad you liked it (Mr. Overkill) 🤣👍

[@MyClutteredGarage]

Good job, Mitch. If I had a MMM, I'd do it that way!

[@MJADoingStuff]

Thanks Ed! I am trying to up my editing skills a little too. 😂 👍

[@MyClutteredGarage]

@@MJADoingStuff from what I see, you're upping ALL your skills!

[@MJADoingStuff]

@@MyClutteredGarage Thank you Ed👍 coming from you it means a lot 😁👍

[@JoeSoslick]

Great video, sweet tractor!

[@MJADoingStuff]

Thanks Joe 👍 your tractor is cool 😎 👍 too!

[@SuperTrackhoe1]

Awesome video

[@MJADoingStuff]

Thanks 😁👍hope it helps your decision about keeping your mid mount mower.😂 have a great day 🚜💨🍳

[@richardgrigg1837]

Nice, very clear instructions. Really looking forward to the remounting the mid mount mower, though could I just reverse the steps? And, Joe Who? Where is Joe's channel?

[@MJADoingStuff]

Thanks Yep just reverse the step 😂👍 Joe Soslick that’s his channel and name. Thanks for checking out the video

[@JoeSoslick]

Hey that’s me! :) thanks for the shoutout.

[@GrampiesWorkshop]

How's she goin'? Getting to know your gear so you can use it more efficiently is always a good idea!!! Nice work removing the deck. I'm new to your channel and since I like tractors and outdoor projects, I'll be back!!! Take care!!!

[@MJADoingStuff]

Thank you for checking out the video. Yep very true👍 I need to be as efficient as possible because you know what is coming ☃️😂👍we will be here when you come back 🍻

[@HillsideAcres]

I thought it would be more of a pain to take the deck on and off. Maybe you just make it look easy. Looking forward to the upcoming videos. You have a good one Mitch !

[@MJADoingStuff]

Thanks For checking it out. I think if I did it the way the manual says I would’ve sold the MMM by now 🤣👍

[@bucksniper65]

Just subscribed to you. Great video. What is Joe's channels you spoke of?

[@MJADoingStuff]

Thanks😁His channel is called Joe Soslick Thanks for checking out the video and subscribing have a great day 🚜💨

[@user-bx3gy5di9g]

What tire pressures do you recommend when mowing with the front loader off?

[@MJADoingStuff]

I always run 22 psi front 10 psi rear year round works great for sandy soil and snow. Thanks for watching 😁👍🚜💨☀️

[@user-bx3gy5di9g]

Thanks MJA. Your channel is very informative. My new bB2601 cutting height dial moves at times when mowing from 4 to 3.5 etc. I'm currently at 25 rear psi. I'll try reducing rear psi to minimize some deck bouncing which may hold the cutting dial cam in more securely.

[@MJADoingStuff]

@@user-bx3gy5di9g That is an interesting issue with the mow deck dial movement. I will look at mine and see if I can figure out what could be causing that. Thanks for the info and idea for a solution in a future video if I can figure it out 😁👍🚜💨☀️

[@user-bx3gy5di9g]

Just realized you r14s are 4 ply. My 2024 model b2601 are 6 ply tires. So my psi rating in the years are 40 psi max 2760 lbs. Your Rears are 25 max psi. . My fronts are 34 max 1230lbs rated . Your fronts are 22 psi max.

[@MJADoingStuff]

@@user-bx3gy5di9g very interesting 🤔 I wonder why? Must be a supply thing. Well at least your tires are strong 💪.

[@campnut6076]

I built a set of wheels that clamp on the bucket edge that works the same way. I feel Kubota could have done a better job with removal and install of the mower deck, especially that front mower mount lever that is hard to get to, and how the pto shaft is attached. Saw how a friends John Deer mower attaches and I was jealous.

[@MJADoingStuff]

I agree but you have to cut cost somewhere😁My neighbor has the JD auto connect deck and it has its pit falls too. Everything has its good and bad I haven't found anything perfect yet. Thanks for checking out the video🚜💨☀

[@AkDadStuff]

And I just noticed that I was not subscribed to you but I am now. Sorry Buddy

[@MJADoingStuff]

Thanks Mike for subscribing every sub counts I have been subscribed to you from way back. Have a great weekend 😁👍🚜💨🥶

[@skeets6060]

I thought thats why they had the drive over ?

[@MJADoingStuff]

Yep 👍 but it is Faster this way.🚜💨💡😁👍