removing/replacing the serpentine belt 2002-2006 Toyota Camry Must see huge tip!

[@topshopbuildandfabricate24]

I’m getting ready to change the belt on my wife’s Camry and I have been working on cars pretty much all my life and I am 62 sliding that belt off the water pump totally makes since and the tensioner I could see that happening no one has mentioned that in their videos that I watch either I am glad I stumbled upon yours. You might have saved me from a nightmare. Keep spreading the word.

[@Psalm11vrs6]

Thank God I found this because our belt is about shot and needs to be replaced. And I would have been the next guy to break the tensioner. God bless you for caring about others, I really appreciate it.

[@topshopbuildandfabricate24]

I wanted to mention something that helped me a lot I did do it the way you showed us sliding the belt over water pump pulley. I have been a mechanic most of my life but I’m 62 now and seeing all the stuff down there is really hard for me with glasses and low light and I had a problem getting the belt around all the pulleys and keeping them on was difficult mostly because I can’t even get my hands down there very well I have the long rod with the forks on the end to help guide the belt on but it just kept slipping of so eventually I had a idea and I used a zip tie to hold the crank and p/s pully to hold the belt on and after I did that I was able to get the rest of the belt on the pulley’s easily thank goodness the crank and p/s pulley had holes in them it really helped lots so I just thought I’d mention that to you and thanks again for the video

[@edwindnsp9794]

You men, you rock!!! 1 hour trying to put that thing in place until I watched this video and boom 2 minutes later job done

[@aly8848]

i also have a 2004 camry also. It took me 1 whole day to put on the belt and that's with the help from my mom.

[@philhall7570]

@@aly8848 Was that trying to Put the last part of the belt on the alternator pulley?

[@ChristRisenAlleluia]

And may you be blessed too, sir! Thank you for your generosity.

[@markzinghini2306]

Thanks so much- You kept your word! Such a great tip Phil! I did notice the smooth pulley below when I changed alternator for nothing as the scraping noise hasn’t stopped. Noticed more pulleys grinding after turning by hand and not only belt tensioner pulley but also A/C pulley. A/C pulley seems complicated for the DIY’er- so that’s gonna cost quite a bit I imagine!

[@the250mikec]

Hey man, I believe you! Never seen a belt so hard to put on👍 had to get my neighbor to come over n help!

[@HarborSite-7]

Thanks for the heads up Phil! I'm replacing the alternator in my Camry and this tip really helped. Appreciate you man.

[@Zxdrag]

Oh man I wish i would’ve watched this video sooner because it was such a pain taking that belt off, thank you sir and god bless you

[@hvacteam]

Great info…I learned the hard way…2 broke…you are absolutely correct!!!!

[@philhall7570]

i feel your pain!

[@sveltland]

Thank you. I snapped that bolt BUT now i know how to install the new one easier and also NOT snap that bolt in the future.

[@billym835]

I discovered this trick today and it is a life saver because it is much easier that trying to get inside those valley edges on the alternator

[@America2gether]

Great tip!!! Made the job a snap for me

[@tobiaswillson5900]

YOU ARE SPOT ON MY MAN !!!!!

[@peterking1270]

Thanks ol timer, appreciate the heads up.

[@edwinalvarenga230]

Thank you for the tip ..I am about to get busy on that....blessing brother...and amen Jesus is coming

[@raulvivas2903]

thank you very much for that tip.I'm gonna do it tomorrow because the belt is ready to snaps!

[@Delmar829]

Really appreciate this. God Bless

[@landscapevision6553]

Thank you, just about ready to do mine and you are spot on!

[@damianloggins5791]

Thanks make sense about to try it out

[@cburgess513]

Thank you sir for those words of wisdom 😊😊😊😊

[@markzinghini2306]

If you have any questions on Rain Gutters(Eavestrough)or Glass/Windows I have experience with that if you need tips?

[@Oscar4u69]

thank you so much, this video made everything much easier ❤❤❤

[@wadehoover3139]

Follow the good shepherd!!! Great way to end!!!

[@bimmerbent]

found my engine w/ this pulley bracket already broken, what is the solution now. Toyota Bracket Part Only ??

[@philhall7570]

Yes you'll have to go ahead And replace The belt tensioner pulley And might want to go ahead and replace the belt too while you're at it, depending on how many miles it has. There are a couple of pretty good KZbin videos on how to replace The bell tensioner

[@chuckalucktoo5492]

I tend to agree. 👍

[@johntourangeau3625]

Amen brother!!

[@marward]

Thanks, I appreciate it!

[@kennymorris7226]

Amen Brother

[@ewoknroll]

i like your style

[@ewoknroll]

going to try this tomorrow. gave up trying to get it back on the alternator pully

[@35texdan]

Yea, I stripped the bolt, however I couldn't get this method to work. Am I missing something? I'm trying to get it back on, and I stripped that bolt. Any help would be appreciated. Thank you.

[@philhall7570]

Are we referring to the same bolt head that releases the tension off the belt? So if you stripped that you apparently were just pulling too hard on it or didn't have a proper fit for the bolt head(or both). If You haven't fixed it yet, try a 6 sided socket that fits it tighter. You don't need to pull on it that hard to slide the belt on. Note: There is a place when you're pulling on the bolt head that you hit a wall of greater resistance. This is the point where you do not want to pull harder, And shouldn't have to.

[@albertnelson2868]

Thank you!

[@trackkstar11]

Thank you sir

[@philipholman9898]

This was a bitch to do. I would have been lost without the diagram.

[@markwilber9028]

Thank you

[@rl13b99]

Thanks sir!

[@themark8389]

any chance you could share the torque settings for the two screws on the alternator?

[@philhall7570]

I don't know that I've ever gone by torque settings when doing an alternator, But I did pull up 18' pounds on my phone

[@damonramsey47]

Shout out to you sir

[@user-qm8cc5go8r]

Thanks for the video, keep the jesus stuff tho

[@philhall7570]

@@user-qm8cc5go8r Read Matthew 24 before you reject Him! You will meet him soon enough!

[@postbyte1]

I removed it from the water pump area. It still broke. I was looking for a video to confirm I was removing the tension off the belt properly. It still broke. Now I'm out another 150$

[@philhall7570]

sorry, but there should have been absolutely no reason to have needed to pull on it hard enough to break it, unless it was already cracked to start with

[@postbyte1]

@@philhall7570 That piston that kept the tension was locked up. It's all good now. The new tensioner works perfectly. My problem has been solved.

[@katphishricky1832]

Ok I am changing my belt and that bolt is snapped what do I have to do to get a new belt back on?

[@philhall7570]

You have to replace the belt tensioner. I watched a couple videos online in Kind of combined Some steps

[@philhall7570]

There might be a trick I don't know about To release the tension

[@katphishricky1832]

@@philhall7570 thanks for responding I got it replaced and wow not very fun! Now the check engine light is on and the car has a really low idle. Tomorrow I’ll pull the codes and go from there. Thanks my friend!

[@philhall7570]

@@katphishricky1832 the idle will reset after you drive it a few minutes

[@kennethz3366]

What order pully when put the new belt?

[@philhall7570]

doesn't matter as long as you put belt on water pump pulley last

[@robertright7788]

What size motor?

[@philhall7570]

4 cyl

[@jamesbeason8646]

Thank you sir