Removing Side Moldings from my 2007 Chevy Silverado 2500HD Duramax Diesel Truck GMC Sierra 4x4 Truck

Support the Channel: / briguy503
Buy merch: briguy503.bigcartel.com/
Facebook Group: / 3289648034441527
Instagram: / briguy503
Facebook: / briguy5o3
Outro song: "Happy Rock" from Bensound.com
ABN Rubber Eraser Wheel: www.amazon.com/gp/product/B01...
In this video I show you how to remove my side moldings from my 2007 Chevy Silverado 2500hd Duramax aka my Grandpa Truck was showing some wear on the door molding. My truck is actually a 2007.5 GMC Sierra. So I purchased a rubber eraser from amazon a little skeptical and tried it out. Turns out, it worked great! This diy is great if you're looking to remove your door trim for some better styling or if your door molding has just sun faded or cracked or just plain looks terrible. The rubber eraser works magic! I love the way my GMC Sierra looks now. I got some style points with just a little under 1.5hrs of work. Definitely worth it! This how to video will work on any car or truck really. But this video pertains to GMC Sierra and Chevy Silverado specifically.
Here is a list of my other truck videos:
Duramax MBRP Exhaust Install | Chevy Silverado Filter Back Exhaust System s6026p | GMC Sierra LMM: • Duramax MBRP Exhaust I...
Removing Side Moldings from my 2007 Chevy Silverado 2500HD Duramax Diesel Truck: • Removing Side Moldings...
Removing HID Headlights from my 2008 Chevy Silverado: • Removing HID Headlight...
BROKEN! 2008 Chevy Silverado Wont Start: • BROKEN! 2008 Chevy Sil...
2008 Chevy Silverado Backup Camera DIY Install: • Amazon Backup Camera I...
2008 Chevy Silverado Lifted 6" Walk Around: • Lifted Chevy Silverado...

[@edmehrer8357]

Nothin like cracking open a beer and getting behind the wheel of an automobile. Awesome video, thank you for the tips!

[@tha.fupa.troopa]

Fuck Yeah!

[@thestcroixkid]

Everyday for a week before you do this spray a bead of orange oil (goo gone) down in the crack between the top of the molding and the door for the entire length of the trim piece, this will soften at least the top strip of adhesive and may even soak through to the lower one...cuts the job in half...

[@cadengilbert3637]

I’m about to get a new truck and I’m gonna do this to it. This video was very helpful and I appreciate it!

[@thedude4514]

I followed his instructions and my '06 looks great now!! This guy rocks!

[@BriGuy503]

Glad I could help!

[@Pollo2400]

Now that's how u supposed to start a video, popping open a brewski 💪

[@davidinsocal3032]

Nicely done! I like your eraser wheel better than mine! When I de-badged my '06 D-Max, I used 30 pound test mono fishing line to get under the badging; using a back-forth stroke to get them off. (Badging??....I don't need no Badging!) And used an eraser wheel to remove glue. Door bump guards are next, but will be replacing those. 🤟

[@BriGuy503]

Thanks, glad I could help!

[@mommieof7]

So I watched a KZbin on how to fix the molding, then I watched yours how to take them off. I proceeded to rip them off my 2009 Silverado, so easy. I also used a razor blade to take the thick part of the two way adhesive tape before using acetone and then the power eraser. Thanks for the instruction. Looks so much better.

[@larndt5499]

Acetone?? Your paint must be tucked!

[@BriGuy503]

Nope, looks 👍 👌

[@mikeochoa9102]

This is great! Going in tomorrow!

[@houseofhahn]

Thank you. You made it look easy

[@ellenwoods3918]

Going to do this to my '07 YukonXL. Same color as your truck. Thanks!

[@StretchYourself]

Ton of editing in the beginning, nice work! Great how to bro 👍

[@BriGuy503]

Thanks bud!!

[@chrisedwards2279]

wow came out great man! I’m in the midst of trying to figure out what to do with my annoying moldings that are peeling off of my avalanche. started cleaning them where they r peeling but i think i might just get that tool for the drill and do what you did and just be done with em for good🤷🏻‍♂️😂 thanks for the vid🤟🏽

[@BriGuy503]

Awesome! Glad I could help out

[@rza380.]

Definitely make sure you have a beer before attempting this, that is the key😂😂😂😂

[@BriGuy503]

Oh for sure

[@mrfazzy3137]

Did this to my tahoe and suburban thanks homie💯👍

[@BriGuy503]

Nice! Glad I could help

[@DUNEATV]

Great job! That will really help someone make their truck look cooler! Resist the urge to put huge wheels and tires on if your going to tow a lot up hills...you’ll kill your mileage and your transmission! Grandpa trucks are reliable!

[@BriGuy503]

Thanks! Yea this is staying a grandpa truck lol I've had enough lifted monster trucks in my life. This is a work horse not a show pony lol

[@DUNEATV]

BriGuy503 Hahaa! Keep up the good work my YXZ brother!

[@BriGuy503]

Thanks bud

[@steve5912]

@@DUNEATV I tow everyday with 24x14s

[@marksalisbury1132]

you've inspired me to remove them on my Yukon... wish me luck!! good video!!

[@BriGuy503]

Awesome! Glad I could help

[@sr1626]

Good job looks great

[@BriGuy503]

Thanks!

[@dcvargas8917]

My silver trim has yellowed like yours. I’m ordering that eraser today.

[@davidgonzales2650]

Thanks homie! I appreciate this video

[@BriGuy503]

Thanks for watching!

[@Squidion713]

Beer break. Yep I’m in the right place!!!

[@BriGuy503]

Haha yup!

[@Hellastockhmong]

Good stuff, keep up the good work

[@BriGuy503]

Thank you!

[@dannyburdette6629]

I recommend turning down the rpm of the drill to 2 or 1.

[@2cee1021]

Ur the man!! Thanks 🍻

[@BriGuy503]

Glad I could help!

[@mikenorwood5195]

Thanks guy !

[@BriGuy503]

Glad I could help!

[@69headwound]

Looks wayyy better

[@BriGuy503]

💯 Thanks!

[@ramadams2554]

Thank you

[@shut_up_ross8725]

thank god i found your video. i thought i was either gonna have to shell out $40 for the 3m eraser drill attachment or spent a week on the thing with a credit card and a heat gun.

[@BriGuy503]

Glad I could help!

[@michaelspence1854]

I ran fishing line under mine and it worked great…it was also 18 deg outside😂

[@BriGuy503]

Yea thats also a great way to do it.

[@silverado1117]

how did you remove the left over adhesive

[@BriGuy503]

I used goof off

[@oserratos]

I did this to my Camaro. Goo gone did the trick for me.

[@BriGuy503]

Awesome!

[@topwatertony69]

This was very helpful thank you so much great video tomorrow im gonna pop open a beer and get to work 👍🏻

[@BriGuy503]

Awesome, glad I could help!

[@diegosantillan9237]

Thank you sir

[@BriGuy503]

Glad I could help!

[@keseanwilliams6557]

I’m wondering if I could do this to my 07 Avalanche and it looks decent.

[@louismann7076]

Hell yeah thanks man.

[@BriGuy503]

No problem, glad I could help!

[@bugzziee]

​@@BriGuy503 i first so i guy doing it on another video and thought man that's too much trouble. then i saw urs. wow, what a diff and so fast and easy. thanks

[@jimspencer1077]

Thank you buddy I got to do that to my truck

[@BriGuy503]

No problem! Makes the truck look alot better

[@oildalejones567]

Thank you so much. I can’t wait to get rid of the stupid mouldings on my Tahoe.

[@BriGuy503]

Glad I could help!

[@dang2769]

Bouta do this for my ‘07 2500 this summer

[@BriGuy503]

Niiiice!

[@JamesMoVlogs]

Dude that looks a million times better

[@BriGuy503]

I know, right?! I shouldn't have waited so long to do it lol

[@JamesMoVlogs]

BriGuy503 well don’t wait to long on trading it in on a ford 😂👊🤙🤙

[@BriGuy503]

Haha I used to have a Ford powerstroke. I did actually like it. But I love this Duramax more. The Ford is coming....just in another form. Shhhh lol

[@JamesMoVlogs]

BriGuy503 😎👊👊

[@kennethmaccourt7393]

Don't be "skerd" lol love it!

[@BriGuy503]

Thanks 😊

[@kyleplayz834]

Hey man, so when I done my truck it kinda left a yellow tint to where I used the bit. I haven’t washed it or anything, just wiped it with a microfiber towel. But what do you recommend about getting rid of that yellow color it left behind?

[@BriGuy503]

Goof off is what I used

[@jaredmcmahon5629]

Will it leave a yellow line on my paint. Its the metallic blue

[@real1wilkins659]

What is the attachment called?

[@Obs_Caden]

searches how to …..: this guy: “cracks a cold one” this guy is the shit lmao

[@angelitolozano8742]

What if you don't have a drill could you use goo gone instead?

[@BriGuy503]

Yea goo gone would work too

[@angelitolozano8742]

@@BriGuy503 aight cool thanks bro will try it out bro cause they're all yellow and doesn't look good at all

[@kfelix2934]

A plastic razor blade works just going to be a lot of work at the end of the day. I would do ion like a hot TX day where the temps are 90+

[@tradz4199]

So what's the verdict? No moldings are cool? OR putting new replacement moldings back on?

[@BriGuy503]

No moldings look better

[@imapcfreak]

​@@BriGuy503 Depends on your opinion. Some thing it looks better w/out bumper panels, but having them on looks better than door dings from others...

[@jordanhart9709]

Used on my white silverado and it left a yellow haze behind. Anyone know how to get rid of the yellow?

[@BriGuy503]

Maybe some goof off? Or something like that?

[@jordanhart9709]

@@BriGuy503 I tried a magic eraser, goo gone and rubbing compound. The compound definitely helped but it's still just barely visible. Honestly it's not a big deal. Whole truck needs a paint job anyway....

[@jordanhart9709]

Very happy with the look of the truck with those panels off 👍🏻👍🏻

[@dwayneemitchell]

Grip it and rip it!

[@user-dk5jz6dk1z]

Make a vid of you putting new ones on

[@Raider_Jimmy]

My truck is black it’s a 05 been wanting to do this but scared it will look like shit after lol

[@BriGuy503]

Just be careful! Take ur time

[@sparky_-mf2cs]

Good job thanks. I think you need a milwakee. Dewalt sukks 😆

[@BriGuy503]

Thanks! Its sort of like a chevy vs ford thing. I prefer Dewalt lol

[@sparky_-mf2cs]

@@BriGuy503 😆 true i was just joking. They both get the jobe done 👍

[@TRUNORCALTRAILRIDDER]

Crack a beer then get behind the wheel . 🤦‍♂️🤡

[@ellargudo5750]

Hell Yeahhh Thats How i Start all my Projectssss, 🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣. Nice, i was using a dammm razorrr but was doing it to Slowww!!!!! Im Going to buy the the thing for my drill, Loved the Video🥳🥳🥳🥳🥳🥳🥳🥳🥳🥳🥳

[@BriGuy503]

Thanks! Good luck on your project