Removing Single Sided Swingarm Ducati Wheel | Tinkering

This is one of the easier tasks. Maybe it'll save you a few bucks if you need to change your tires!
___
✩ Instagram - / motodutchman
✩ Twitter - / motodutchman
___
More Videos Here -
/ motodutchman
Consider Subscribing to the MotoDutchman!
kzbin.info...
___
Who's the guy with yellow gloves!? Out Of Town For Business!
/ @outoftownforbusiness4276
___

[@nhatnguyenminh8933]

I dont even own an ducati, but your video is tempting me to get one sỉr. Outstanding job

[@Iraqitammar]

I put them Q3+ on on last Fri.. did a track day on Sat and man "AMAZING" I personally will bever buy the supercorsa again just for the simple fact the Q3/Q3+ are providing everything that the supercorsa provides but they're half the price. my mechanic pumped 34PSI on both and that didn't go very well as i start feeling that i'm loosing the front, so i ran the front with 30PSI and the rear 31PSI and that was unbelievable how great they where.

[@johnfleming1476]

I used all hand tools, a 55mm socket from Northern Tool and a 24 inch breaker bar. The only issue I had was the holes in the clip didnt quite line up so I had to tighten slightly more to get them to align. All good.

[@richardjames26]

Thanks so much - Exactly what I needed!

[@x3thelast]

This is the MAIN feature I wish my 899 had as well, removing the rear wheel take a bit longer than I'd want. Plus re-installing it and aligning the rear wheel using the NON-precision notches on the swing arm blows. My OCD kicks in and I MUST use a digital caliper to measure the distances on both sides of the swing arm to the tenth decimal place.

[@brandoncrowell5116]

Must be quite the ocd lol

[@ScottDoesMore]

DUDE - your videos are super helpful. Thanks

[@chrisr3155]

Very informative video and straight to the point. Good work!!

[@chrisr3155]

Thanks, mate.

[@pistolpete6321]

Awesome, thanks for doing this video!

[@TonyTsai]

Great video for someone coming into Ducati universe

[@mauricewhite9149]

Nice video mate! Makes the decision to buy one even easier

[@MrEska96]

Nice video! :) When is coming the video for the front wheel? I'm curious about the Pitbull front stand...

[@ronsworld6831]

I like it! You can never have too many tools. Ducati is going to want to hire you to lead their service division.

[@ride4funnomg103]

Pit bull stands are not cheap, but so worth it.

[@jpow4893]

@@Dutchman0 I have the same rear stand I use on my SuperSport. It's sized so you can use it on either side of the rear wheel. One side of the swingarm is one size and the other a different one. So the spindle is sized for the smaller hole. So when you put it through on the larger hole side the bike will lean a little, but when you switch the stand to the other it will hold the bike level! The pitbull stand requires two different spindles to use it on either side. It's a trade-off I'm willing to take since the T-rex stand is cheaper.

[@josip1609]

Where do you buy key for wheel

[@vandycam4704]

Glad you didn't "wrench" your back changing the tire!

[@martindelgado4322]

Would you mind sharing the PIN number for the front stand to lift it from the triple tree? I tried to look it up at the pit bull site but I can’t find it! Thank you!

[@John-gz2me]

Great vid and info - thanks!

[@John-gz2me]

@@Dutchman0 Yes, the Missus has a Multistrada 1200S so the procedure isn't dissimilar, from what I can see. Cheers!

[@IKnowFootball]

Nice video! What rear stand do you have?

[@IKnowFootball]

Moto Dutchman thank you. I’ll check em out.

[@TheDucatiPilot]

Another great video! One question I do have for you is what brand is your torque wrench? Thanks!

[@TheDucatiPilot]

Thanks man! I really appreciate it. You've definitely made an "impact" :)

[@tnelliott2447]

Great video as always Quick question Does the triple tree fit without touching the front nose plastic Thanks

[@tnelliott2447]

Moto Dutchman thx Cheers

[@markdailyofficial4513]

Are you from Netherlands

[@detaviansmith]

Lol your going have a bad time good one subbed

[@deniskuro3526]

Ha a video finally lol ... you should do how to adjust chain

[@Black_Gold_Saw]

Losen 2 bolts at the back of swingarm. Tighten up chain by pulling upwards with a specialtool, secure both bolts with 30/35nm. Done.xD

[@Iraqitammar]

I gotta say the video is super nice and helpful. However I notice your new tires which the happened yo be the dunlop q3 which is my fav tire. have you noticed any issues with the q3 cuz I'm a about to install Q3+ on my 2012 1199S.

[@Iraqitammar]

Moto Dutchman lol yea I am very observant haha. and yes I bought 190 55 17 Q3+ hopefully I get them on tomorrow

[@Iraqitammar]

Moto Dutchman yea defiantly I can't wait.

[@tomaspajersky1844]

I have a question. Is the risk of demmage the central nut or axe if I use impact wrench ? Or it is save to use the impact wrench. Thank yo

[@Dutchman0]

Impact to loosen the nut. Never use an impact to tighten.

[@alexb5275]

Made an impact, ha!

[@cnealmartin]

Hey man I am in a time crunch and really need your help ASAP !!! I am replacing the chain sprockets. Everything is going great... now im stuck. I bought a super-lite kit. Rear sprocket, new flange and carrier. How do I remove the hardware from the original sprocket?? The piece that outer flange bolts onto. I did not get the extra plastic light cush drives. I thought "Big deal I just use the original hardware on the stock sprocket." Track day is SUNDAY !! AHHH !!!

[@cnealmartin]

Yes ! Turns out the cush drives on my OEM sprocket needed to be pressed out. Once those were removed they slipped in the new sprocket carrier with no effort. Got lucky and a local Ducati tech did this for me. Only took him about 10mins. New light weight 520 chain, carrier, sprocket set up looks amazing and runs excellent!! Track day yesterday was sooo nice. The shifts were super easy and drive was much smoother. I went with a 40 rear sprocket. Not a dramatic change in the gearing.

[@saintmichael01]

Is it wise to use a non impact socket on a air impact

[@waynethorne11]

What impact drive is that?! I am shopping for one

[@TheMacki95]

nice!

[@TheMacki95]

Moto Dutchman i cab maninge that

[@jk1320m]

Do you have to remove something to use the Pitbull front stand. I only see plastic under mine

[@jk1320m]

Moto Dutchman is there a special tool or way to get it out.

[@jk1320m]

Moto Dutchman thanks

[@saleenr6]

i love your vids, too bad ur not posting anymore. " if you get a 6point your gonna have a bad time" hahaahahahahahaahahahah

[@TheNorthPilot]

Anybody know if it’s the same torque spec for Panigale V2 ? 🧐 I guess yes....

[@kyles5751]

I dont even want a bike for the street in Illinois. This state sucks.

[@Dutchman0]

For sure. Even when you get away from the city 99.9% of the roads are straight. I'm glad to be in PA now with smooth roads that actually curve.

[@kyles5751]

@@Dutchman0 I live a good 50 minutes from Chicago and yeah, not much changes. The only place that's different is probably Galena, they have some nice roads, but nothing impressive. One of my neighbors moved to PA, still in touch with them. We're looking to go south, my parents are getting older and the winters are getting to be a bit much. At least, if nothing else, this state has quite a few MX tracks.

[@Dutchman0]

@@kyles5751 Yeah, anything on Rt 20 near Galena is great. Rt 2 heading south out of Rockford along the river is pretty good, too. I grew up near the Joliet MX track.

[@CORZER0]

What's the background song? Any issues with that Pit Bull head stand? What size pin for that stand do I need for my '13 1199? What are the $1.9B winning lottery numbers? Thanks for the vid!

[@Dutchman0]

LMAO @ the lottery. Song was from one of those royalty-free sites called Odyssey by Kevin MacLeod. The front stand has been great, but I don't know what pin you need for the 1199. Not sure if it's the same as the 1299.

[@CORZER0]

@@Dutchman0 Called and talked to Pit bull yesterday and sorted it out. Pin for my bike is #28S. Put the order in and they shipped yesterday afternoon. Great company! Thanks for the vids, they have been very helpful with my new-to-me Panigale.