Removing stubborn broken bolts and MBTS returns….work on the 850b continues !!

[@joedoakes8307]

This IS a Million Dollar Friendship defined by laughter and friendly banter with a big dose of friendship included !!!!!

[@nossnitram]

All the love to Man behind the Scene. And to you Mr Dirt Perfect :)

[@denistaramasso9724]

Aaron puts a lot of life into your videos. You two act like brothers. Great 👍 👌 👍 team

[@dbern5577]

Grease have been our best anti-seize and anti-rust solutions for decades and counting.

[@bobfromtheband1]

Wow, welcome back MBTS. Yes we've missed you!!!

[@charlesmarshall3396]

It's good to see man behind the scene helping you on your projects

[@kopenhagenkid]

Nice to see Aaron in your video Mr Dirt Perfect

[@michaelmullins1290]

It's nice having somebody to cut up with while working. Makes the work go faster. And you always need somebody to ask where something is!

[@gayle4804]

Great to see Aaron back again it's not the same without him thank goodness hes there to help you Mr. Dirt Perfect!! 😊

[@aaronbummmanbehindthescene4931]

Gayle thank you for the support 🤙🏻

[@gayle4804]

I love it when you and Mr. Dirt Perfect go at each other and I think you guys work very well together

[@aaronbummmanbehindthescene4931]

@@gayle4804 thank you

[@georgeenriquez612]

MBTS is awesome! Welcome back Aaron. Glad to see you back around

[@tammyhasenauer9859]

Aaron!, your back missed you! I grew up in Arizona calling it anti-seize.

[@d.mushroomhunter3528]

I tell you what Mike.. you must be living right or holding your mouth the right way I've never had an easy out work that good!!

[@carsons6519]

The tap sockets are made by lisle tools you can find them on Amazon...get the small and large sizes they are awesome.

[@kopenhagenkid]

Great job working on the Dozer Mr Dirt Perfect

[@apollorobb]

Glad to see Aaron back .

[@hastingshayandtreefarm4402]

I love the friendship with you 2 it's hard to find friendships like that.

[@TheFritz423]

Excellent video! The heavy equipment maintenance/repair videos are becoming my favorites.

[@DirtPerfect]

Glad you like them!

[@brucehobbs1734]

I love an owner/operator that works on their own equipment. What a great fleet!

[@DirtPerfect]

Thanks

[@andrewmiller2868]

So good to see Aaron back 🤣😂🤣

[@chrishelms1967]

We definitely MISSED YOU MBTS !!!!!

[@miker1448]

Always enjoy the banter when MBTS is in the building.

[@arkiefyler]

Welcome back, Aaron!! 👏DP needs his adult supervision!! 😳His wife tried, but she is too kind!

[@mikenixon9164]

Never a dull moment with Aaron there. Good video.

[@aaronbummmanbehindthescene4931]

That’s right Mike! 🤙🏻

[@alphonsotate2982]

Boiler welder ---YES----I salute him he is real good

[@flick22601]

Mike, you are the MAN. I've NEVER seen anyone succeed removing three consecutive bolts with EZ-Outs. In fact, the only time I've ever had them work is on aluminium. Those bolts probably surrendered because they new MBTS was coming and he had a welder and knows how to use it.

[@DirtPerfect]

Thanks buddy

[@adventuresinlandservice6656]

I'm in NC and we call it anti-seize but we pronounce it "anty seize". Jerry will be proud of the way you are maintaining his dozer!

[@ToddKing]

In northern Indiana we call it "anty-seize" too. Often there not even a hint of a "t" so you get "anny-seize". So I'd be surprised if most people in southern Indiana really said anti-seize in actual conversation.

[@butchnelson5472]

Desalt all the way boys! No comparison,no compromise. It is what it is!!!

[@f250ford2004]

Welcome back MBTS!!!!!!!!!!!!!!!!!!!!!!!!!!!!!We had a night mechanic that went thru a bottle of anti seize every night, if he worked on your truck you had to keep wiping it off for a couple weeks!!

[@nathanmiller6093]

Welcome back Aaron and we missed you

[@dansnider960]

When drilling out a broken bolt, use left hand bits. It heats op the bolt while applying torque to help loosen the bolt

[@DirtPerfect]

Never had much luck with that

[@dansnider960]

I have had pretty good luck with up to 1/2"

[@royordway9157]

Never Seez is a brand of anti-seize. It's good to have Aaron back.

[@BILLCLARK-he4kc]

I like watching you and mbts work together reminds me with the guys give each other a hard time but with respect

[@philipsavickas4860]

having removed countless broken taps and bolts i know what a relief it is when they turn

[@KevinCoop1]

The easy outs made the bolts come out easy! Aaron is correct! It is a ratchet wrench! Was wondering why MBTS channel had nothing new!

[@tylerbarger9897]

Thank God he's back because he is funny and gets things done like it should lol

[@LilWayneFan971]

Hope you have a great day guys!

[@beardy4831]

On the channel I C Weld he worked out a couple of broke off bolts by putting a short section of pipe up in the bolt hole, then stick welding the pipe to bolt. Similar to welding a nut on. Then pipe wrench on the pipe. Might take a couple tries cause the weld will be sh"t. Might also take some liquid lube to help the threads.

[@plumbcrazy375]

I think you two have to much fun working together

[@waynep343]

Transmission jack to do the bottom rollers. Right angle brackets to pull heavy hubs Right angle adapter to do flywheel and clutch removal and install. Holding pickup and car doors up with somebody balancing the door while you door hinge pins and bushings, a straight up threaded rod thru u joint yoke to do drop out differentials, belly pans along with doing transmissions.. Easy out and tap tip. Hammer a carefully selected nut over the square shank allow to drive it with a six point socket.

[@DMAN10]

Just the boys in the shop who are obviously BFF’s! I can only imagine the unedited version of you guys!

[@morgansword]

MBTS, thats a mouthful everytime you hand some blarney back and forth. Ya I miss not seeing him on the job site. I have warmed up to Matt just as well. Like you happy to see bolts come out as the stuff used properly before... Anti seize is what it written on the bottle and seems to last for a good long time... maybe a drip of diesel to keep it damp and pliable. Although too late to be of use to me, others should pay attention to info on hydrostatic transmissions.... If I remember right, it is closer to a planetary drive than a transmission.. that is how I remember they kinda worked. I'm 72 and haven't had tools in my hands for years... I am wrong for sure. Thank you again for some fine time in the shop and making me feel like part of the crew Mike... thats good editing

[@jeffcotton2235]

The Ghost of Christmas Bulldozer Workshops was with you on the EZ Out usage! Big Relief....

[@jamesdiehl8690]

Hi MBTS! 👋 We missed ya', kinda sorta! 😆 🤣 😂

[@firmrootsgrading9916]

As a mechanic I will dream of this for years to come. Every time I have a broken bolt I will look back on this day and think how awesome it must be to get all the broken pieces out. I never get them out that easy.

[@johnhenderson8360]

I like your videos. A man in your business doesn't stay afloat very long unless he can do at least some of his own maintenance. AND the only person who doesn't use an anti-seize product is someone has no intention of removing those bolts ever again.

[@josephdriscoll8527]

What a treat MBTS returns doesn't get much better

[@robertbaitinger8226]

Welcome back mbts missed you bud

[@FeralPreacher]

Mike, you sure were brave working by yourself with no one to blame but yourself. Aaron you have been missed, nice to see the shop all cleaned up after Mike dumped all the dirt off the dozer. Good job getting all the broken bolts out and not breaking the ezout. looking forward to seeing the tracks go back on. Thanks for sharing.

[@johnblake3863]

It is such a wonderful reward when things work out for us! Congratulations!

[@DirtPerfect]

Yes! Thank you!

[@alphonsotate2982]

So glad to see the broken bolts easey out like it is my machine I now the feeling---------YES!

[@arthurjames1944]

Pay him more and keep him around he is a good worker.

[@DirtPerfect]

Unfortunately not a option right now

[@jw.smedinga4538]

Another great video. Thank you. Great to see MBTS back in the workshop again.😀👍💪greetings from the Netherlands.

[@clydeacor1911]

Good to have Aaron back. My anti-seize says anti-seize right on the bottle.

[@dalejohns2758]

YeeHaww! MBTS is back!! I'll start watching more often again.

[@JackGiralico]

Welcome back MBTS. As a retired millwright I can attest to the fact that any good Boilermaker can weld anything from a broken heart to the crack of dawn.

[@aaronbummmanbehindthescene4931]

That’s right Jack!! And thank you

[@brianbabb6666]

I would think Dawn would be a little pissed about welding her crack.

[@brianbabb6666]

@Samuel Letnerif DP had anything to do with Dawn's crack MBTS would be the least of his problems. Probably have to weld up DP's crack by time Mrs. DP was done with him.

[@tracyjohnson7017]

You can use a creston, openend wrench, even t-handle wretch used for tapping

[@Fault.Current]

Put a piece of copper pipe in the bolt hole and then you can weld to the top of bolt with out welding to the side of the bolt hole. But that was the easiest easy-out I've ever seen. Great job.

[@ProudPapaw88]

Great job guys! You two make each other. When you get tired of working you two could make a great comedy team. Thanks for sharing!

[@DirtPerfect]

Thanks

[@charlesyell6318]

Sure nice to see MBTS back.

[@Bediasman]

I echo the Welcome Back Aaron (MBTS) to your channel. Really enjoy his contributions. Thank you DP for your videos .

[@grahamallen3941]

Nice to see you back Aaron especially to keep DP in his place 😂😂. Good to see you buddy. Great to hears the laughs again. Take care and be safe.Graham 🇬🇧🇬🇧👍👍

[@SupermanJH68]

The witty banter with Mr MBTS is priceless. The dozer? Kinda like polishing a . . .never mind. Lol. Keep up the good work. Great vidjeo.

[@kopenhagenkid]

Great video Mr Dirt Perfect

[@saliemi1]

So nice to see you back Aaron.

[@drich6816]

I like welding the nut on the broken bolts. Works great

[@curtisfrease946]

Thanks Mike and Aaron!

[@donaldmendes184]

Mike take thick wall pipe, cut section about 4 " long , diameter depending on size of your bolt to remove, then weld intubing to broken bolt. Then use a pipe wreck Bach to spin bolt out. may have to heats bolt also.

[@WallaceBeneway]

It must be a blast to work with Aaron all day... I'm glad that he's back for a while...

[@christophergiddens8996]

Great to see mbts back, great video.

[@aaronbummmanbehindthescene4931]

Thank you Wally!! I appreciate the support 🤙🏻

[@aaronbummmanbehindthescene4931]

@@christophergiddens8996 thank you buddy 🤙🏻

[@rickybeaugie668]

Hi guys,The Odd couple was a great show & So Are you guys!!!!! Can't wait till for tomorrow.

[@sassafrasvalley1939]

Akum Pucky was my dads name for it… strangely, he called pipe dope the same thing! MBTS makes the day go faster… and I can’t help but chuckle! Mikey, that first roller might have had another couple of months in it… But, don’t despair over the loss of utilization… those Preventive Minded fans will be satisfied. I enjoyed this… Thanks

[@cfreem02]

@Dirt Perfect I’ve learned a lot from you on purchasing used equipment. Glad to see Aaron back. You should give him a full time job.

[@DirtPerfect]

Thanks but he don’t want one

[@jackiesiebrass3321]

Love the giggles and chuckles...

[@randyfreedman5336]

Anti seize and nice to see Aaron back on the channel

[@charleslindsey9167]

Glad to see MBTS back!!

[@denisricher1349]

The dirt perfect torque wrench.... once you grunt its good....love it

[@BIGTINY360]

So glad Aaron is back on the channel!! We've missed you buddy! I look forward to see all of the shenanigans y'all get into!! 😂

[@andrewcorrell1923]

Great informational video fellas! Welcome back Aaron, DP is lost without your supervision😂

[@alsaku33]

Anti-seize, the product that gets everywhere except where you want it to be. Loved this video man!

[@DirtPerfect]

Thanks appreciate that

[@butter262]

Great to see Aaron back.

[@jafo9346]

Outstanding job D.P., of getting those broken bolt remnants out of there. Nice to see MBTS back in your shop!

[@DirtPerfect]

Thanks

[@raycandle5209]

Welcome back Aaron, not been the same without you, you’re the difference between a team that manages & bumbles along & a team that excels, good to see you back buddy, 👍👍 oh, & good vid again dp 😁

[@aaronbummmanbehindthescene4931]

Thank you Ray it was good to be back

[@aaronbummmanbehindthescene4931]

@Samuel Letner thank you buddy and it felt good being back in the shop

[@rackman5111]

Good to have you back MAN BEHIND THE SCENES and yes we mist you👍and up here where the snow banks are 6 feet high we call it Never seize 🤪

[@denistaramasso9724]

Mbts is one awesome welder. He brings the video

[@denistaramasso9724]

Mbts brings the video up 10 notches

[@tjjewell4115]

Welcome back MBTS, you guys saved yourself a boatload of money in Maintenance costs doing the work yourself, great Video.

[@virtuestreams2616]

Bahahaha--I enjoyed the shaving incident! Sure is nice have TMBTS on deck again. ✌🏻❤️🔧🤟🏻

[@dannyabston7051]

Friendships like that only come through struggles from years of working together. Awesome video

[@tri-state-crew2662]

I’m ready for some more Lieutenant Dan videos

[@panamint]

Does anyone else get a knot in their stomach every time you see someone doing that first pull on the wrench on an easy out, just knowing that easy out going to break and cause a lot more headaches?

[@gurraflex6478]

been there, done that so yeah i know that feeling

[@wesleyfranzen6675]

I think he has too, judging by his reticence in the moment😂

[@sassafrasvalley1939]

Yup… that snapping sound is right up there with momma calling you by your full name!

[@dennisrcole]

Or expand the threads even more .

[@edwinhsingmaster9135]

The right brand of penetrating oil, and a muffler gun, and you'll have to try very hard to break an "easy-out". It pains me just to spell it, I hate they so much. Get your self using Maltby brand. I know you've never heard of it, but if you try it, you'll never be without it again. RD4 Brian, are you seein this? And yes mail order a case, you won't be disappointed!

[@silkpursemaker2773]

Here in England i use copperslip.

[@countrycartier]

Good to see MBS is back to keep everyone straight 😉

[@davestuart6593]

Mini Man behind the scenes is “Back”!

[@charlesfreed7834]

Glad to see the 850 getting back into shape

[@pnwRC.]

It was great to see our vertically challenged friend back in the shop again!

[@exportedafrican]

Never seen someone have such good luck with an easy out. Think I’m going to try a pipe wrench in future! Looks like it made the magic happen

[@wrstew1272]

Back when I worked on helicopters it was anti-seize, but we called it silver slime. Gold wasn’t available then. Early 80s, but have sworn by it since finding it. In the salt belt ( winter road salt ) I do brake parts and lug nuts religiously- a coat between the wheel and rotors let’s you take the wheels off after running in a salt bath for half of the year.

[@gunnerhede6768]

yeah, we missed him, the man behind the scenes.

[@jogge1980]

MBTS welcome back in the dirt cave... you have been missed...

[@peterduran8564]

Good to see Aaron back

[@wallbawden5511]

well when those broken bolts started to turn and come out i almost fell out me chair think i was just as excited to see them move and come out as you were nice job with relay little effort big advantage in using never cease that for sure

[@robertburns8673]

This is a GREAT place for safety glasses and/or shield 😁

[@robertburns8673]

Now I see got them on now👍