Thx man !! 🖖 A little less rpm, but yes, the sound is great, I was surprised myself
@themajster0079 Жыл бұрын
@@Made.by.hrosko How does this engine perform under such harsher treatment? I see that you like to drive at high revs, just like me :D I have one more question What is the difference between this engine and Twingo RS? In other models, it generates more power
@Made.by.hrosko Жыл бұрын
@@themajster0079 1. this engine is very durable and does not suffer much from anything, it has a strong construction of the block, a good cylinder head.. sometimes it happens that the valve falls, but that is the case of a racing car or clio RS. you need to change the quality oil in time according to how it gets :P 5-7k harder, 10k normal my engine has 360k km :P the compression is great and doesn't take oil, nothing needs to be topped up even at 10k km.. yes, on the video you could see that it was smoking a little, but that was caused by the fact that the exhaust was still burning 2. twingo RS uses "big block", it is a little different, but that doesn't matter, parts from it can be used for this K4M. they are common - bigger intake manifold, better cams, bigger 11:1 compression, maybe some things regarding lubrication, and mainly twingo uses VVT timing. all the things can be rearranged into a clio (small block) and have a rocket that will attack 150hp.. at the last measurement, I still have 136hp on the old exhaust and the old short ram intake, I have some new things, maybe I got closer to 140hp, the car is a little livelier.. I'll take it to the dyno again in the fall because I want to finish the pops and bangs
@themajster0079 Жыл бұрын
@@Made.by.hrosko And which of the mods improve performance the most? I would like to buy a Clio with this engine someday But I'm wondering where to start the modifications I'm subscribing and waiting for more videos :)
@Made.by.hrosko Жыл бұрын
@@themajster0079 1. Better and freeflow exhaust ideal decat with silencers , 4-1 exhaust manifold (Feel it mainly in revs) I recommend a diameter of 50mm 2. Better intake 3. Remap .. You are somewhere around 125hp It is more expensive for higher performance 1. Cams from Twingo 133 RS 2. Twingo RS intake manifold 3. 4-1 exhaust manifold and exhaust 64-55mm diameter 4. Remap (Are you somewhere around 150hp for around €1000) I recommend doing only "stage 1" because the car is cheap, and Twingo RS parts are harder to find.. it's plenty enough for normal roads, it's a lot of fun Thanks for watching, there will definitely be new videos from first person :)
@TheBriiig Жыл бұрын
Very nice
@Lokura1987Ай бұрын
I have a K4M in a Megane and I would like to improve it, can you explain to me what to put on it?
@ifelser10 ай бұрын
I have the maximum configuration with this engine. Only there is no sunroof, additional interior lighting, heated seats. But there is ancient navigation. (Rarely seen on other Renaults). I have a couple of questions, how can I contact you?
@Made.by.hrosko10 ай бұрын
sure, no problems on instagram :)
@fikz3d Жыл бұрын
Nice build man, how did you do it the intake? I thinking to do on my k4m clio
@Made.by.hrosko Жыл бұрын
Only 172 airbox and custom hoosing 76mm :)
@LeonardoValente_ Жыл бұрын
Where did you bought the 4-1 manifold ?
@Made.by.hrosko Жыл бұрын
I bought it in my country with great luck for little money, otherwise it is a copy of the KTR Twingo RS exhaust manifold.. good quality can be bought on ebay (gravity).. make a 50-55mm exhaust and you will be fine. It will be a lot of fun .. before I had a 172 exhaust manifold reweld on k4m Flange , it was nice but I didn't have a good exhaust .. this is how I bought a set and it works great
@keskenyszabolcs99914 күн бұрын
Hey bro! I also have a car like this that I race with and I have a few questions for you, I would be honored if you could answer them.
@Made.by.hrosko14 күн бұрын
@@keskenyszabolcs999 Feel free to ask :) feel free to write to me on Instagram, I'm from Slovakia 🙌
@keskenyszabolcs99914 күн бұрын
@@Made.by.hrosko what is your insta?
@AntKardano10 ай бұрын
hello mate, do you mind if I ask how much fuel your K4M uses on average?
@Made.by.hrosko9 ай бұрын
hi, mine used to be around 6.4 for a long time even with sharp drives, I could normally go around 5.5L/100
@pauloesteves4804 Жыл бұрын
Where's the manifold from? Custom made?
@Made.by.hrosko Жыл бұрын
Nope :) All is Twingo RS 4-1 AMA exhaust Kind of like KTR