Renault Laguna II. Key Programming.RenoLink

[@juancarlossabridofragoso1326]

Muchas gracias por tutorial, no se nada de inglés, y con tu ayuda he configurado mis 4 tarjetas. Gracias.

[@YOYODiagnostic]

You are welcome. 👍

[@__Dark_Horse__]

Nice job. Thanks.

[@YOYODiagnostic]

👍

[@gameiro59]

I've also tried Renolink 1.87 with a Laguna II and a Clio II with chinese Keys and worked perfectly. I bought Renolink from EU, but the chinese version also works.

[@YOYODiagnostic]

Hi. At this point they have the offer for the original product which costs a little more than the Clone. You can find it on www.renolink-europe.com

[@kadermin7532]

Is the card blank or which card can I program?

[@kadermin7532]

Is the card blank or which card can I program?

[@YOYODiagnostic]

@@kadermin7532 Hello. yes in this case i programmed a card bought from ebay.

[@MiguelSilva-mb4ys]

@@YOYODiagnostic u know that website is fake right?

[@Li3DLi3D]

Thanks

[@YOYODiagnostic]

👍

[@andresmariajuli]

Hola, sabes si se puede a Renault laguna 2 fase 2 tarjeta 3 botones inteligente

[@kadermin7532]

Is the card blank or which card can I program?

[@we-are-electric1445]

I have an ELM 327 interface (firmware version 1.4). Anyone know whether it will work with the RenoLink software ?

[@kaller.9440]

If I don't have any cards for the car at all and I get used 3 button cards and new transponders, can I just add them to the car? The only original thing I still have for the car is a transponder, but it is not recognized by the car, so I can neither open nor close it and I cannot turn on the ignition. If I find the cards again, I can turn on the ignition, but there are other transponders in it and I would now get 2 cards with the same buttons from a used car and swap the transponders in the cards and then teach them, I have to do each one Press card on Validate or only when I have put all the cards in one after the other?

[@kaller.9440]

Press Validate after each card?

[@shorts_tok_.]

Hey! Nice video! Can I make a keycard if I lost all the cards? Or I need one which would start the car?

[@YOYODiagnostic]

Hi. You don't need a key to be able to make a new one .

[@peterboden6130]

Hi. Do you have any information where can I download working software Renolink 1.87 or the newer 1.99 ? I purchased a Renolink adapter ( colour is red ) from AliExpress but the software program can't find the adapter/dongle. The seller does not respond. So i would appreciate if you could help me. Thank you. Peter

[@YOYODiagnostic]

Hello, unfortunately I don't distribute software, that's not the purpose of this channel. I use Original from Gabi Gafu, please contact him.

[@allmor77]

hello....it is possible to program a 2 button card instead of the original with 3 buttons (lock + auto in the middle)...thanx ....

[@YOYODiagnostic]

Hello, Yes it is

[@pierrejoseph4968]

windows XP ???

[@elsadogful]

Hi there Can I program three keys at ones?

[@YOYODiagnostic]

Hello, yes you can. I programmed 3 new cards bought on Ebay because the car no longer had any keys.

[@kaller.9440]

how did you get a connection to the probe? I get rid of the red x but then I get this message Character spacing is invalid and cannot be removed. I just want to read the pin of the cards and then establish the connection for learning and programming and then after that has happened successfully cut the connection.

[@YOYODiagnostic]

Hello, do exactly as I did in the video. i think i have two , watch carefully and remember to keep the driver's door open while doing this.

[@kaller.9440]

@@YOYODiagnostic Driver's door is open. Light, ventilation, radio, etc. are switched off. But Renolink always says: Padding is invalid and cannot be removed. Lg. Kalle

[@YOYODiagnostic]

@@kaller.9440 make me a video and send it by email.

[@kaller.9440]

@@YOYODiagnostic Mail?

[@YOYODiagnostic]

@@kaller.9440 I posted my email address everywhere. Next time please search don't be lazy. [e-mail]. If I give you time, you can also look at the address for at least 1 minute.

[@dul-boy]

When I try to key programing,i finsh read pin and connect,but on start learning i get-7f3b22 Conditions not set or sequence error...Any help,thanks...

[@YOYODiagnostic]

Hello. take a picture and send by email

[@dul-boy]

@@YOYODiagnostic I send mail,but i dont get answer...

[@YOYODiagnostic]

@@dul-boy I've been away for almost a month and I have over a hundred messages. I answer as quickly as I can, but I don't sleep in front of the PC. every email I receive from you has a requirement and it takes my time, that's why it takes so long to reply to the email.

[@princeopokumensah6602]

Please sir I have Laguna 2 2007 Can you help me program it. I don't have the software

[@YOYODiagnostic]

Hello, unfortunately I can't help you! How can i help you if you don't have what you need for the repair?

[@chafikabderrahim1862]

Thank you very much. Can I get a car file for Laguna 2 phase

[@YOYODiagnostic]

Wich Files?

[@victorlongwe3954]

Where can I contact you sir to help me

[@YOYODiagnostic]

[e-mail]

[@adycirstea]

Very good instructions for Laguna. Trying to add a key for Dacia Duster following your procedure, but keep getting an the following error once i pressed Start Learning . 7F8022 Conditions not set or sequence error. I'm using a Chinese clone of Renolink:( Any ideas please? Thanks.

[@YOYODiagnostic]

Hello. send pictures by email

[@adycirstea]

@@YOYODiagnostic Hi YoYo, where can i find your email address please?

[@YOYODiagnostic]

@@adycirstea [e-mail]

[@bigirakli]

@@YOYODiagnostic Hello, Did you solve the problem? i get the same error and i can't find solution online.

[@abdellahorjouan7603]

Hello my brother. My brother can help me. I want the patch panel Clio 4 model 2017

[@sco9114]

where can I download renolink pls

[@YOYODiagnostic]

@@sco9114 from company ho sell you this programmer

[@sco9114]

@@YOYODiagnostic there is lot of fake and scam. the first links on google are totaly scam. do you have any link pls

[@samboukone1947]

Hi friend can I have your WhatsApp number I need your help to programming renault laguna 3 key please

[@YOYODiagnostic]

Hi, unfortunately I don't give the phone number. If you have the Renolink clone, know that you have a 90 percent chance that it won't work.