Thank you, i just changed my starter onmy 2008 master using the method from your video and it was t half as hard as i was expecting.. im back on tje road and chuffed to bits.. top man.
@RayBrennan5 ай бұрын
thanks for taking the time to make this video. I just hit some insane bumpy lane dividers and no I can't start my beloved 08 master
@kazzigАй бұрын
The exact same happended to my starter. Renault Master 2, 2006, 2,5 dCi, 190.000km. Changed it last week, works like a charm now.
@waynemurphy7080 Жыл бұрын
Brilliant video. Just changed mine. More or less the same issue. One of the long bolts on the side of my starter was actually missing. Renault master 2009 120dci
@shed.projects51502 жыл бұрын
A great "real" video, now I have to do mine. Not so easy when your in your 70s, but such is life.
@Mad4FrenchCars2 жыл бұрын
Started nicely after replacing that starter. We'll done mate. Quality stuff.
@crankyconrods74172 жыл бұрын
Thank you mad4frenchcars I'm glad you enjoyed it as much as I do making it hopefully the channel will continue to grow and il be able to make more interesting content for you
@goodgason6 ай бұрын
Thank you 😁 gonna tackle mine tomorrow and this video helped a lot
@YpsilonXY2 жыл бұрын
Have to do the same i a few days. Thanks for the video.
@ezyrides45922 жыл бұрын
Video was a Great help. Thanks. ☝👍👍
@calumwardlaw4572 жыл бұрын
Cheers for this I am just about to do mine Also need to do the primer fuel line as I have air getting in, any tips I take it I need to drop the tank?.
@crankyconrods74172 жыл бұрын
The most common air leaking into diesel on these is the hand primer under the hood bonnet 🤣 if you like I can do a video for you showing how to sort it if you like ✌️
@calumwardlaw4572 жыл бұрын
@CRANKY CONRODS that would be amazing am sure it would help a few folk My coil light is also on was thinking may as well replace the glow plugs and possibly the injectors (as they look pretty rusty) think both are original 2008 2.5 115 130k 4 jobs but been great since I have had it since 2017
@crankyconrods74172 жыл бұрын
The injectors are really quite Hardy on these long with the engine. As you can see this one's a 2008 with nearly 300k on it all original except gearbox. I also have to do injector seals on this one as it sounds like a steam engine on start up but quiets down when hot so I can do one on that for ya too as the threads in the head can be really temperamental and pull out the threads ✌️
@Ash-vv7eu8 ай бұрын
Hi do you do mobile work? i need my starter replacing in kidderminster
@crankyconrods74178 ай бұрын
Send an email to crankyconrods@gmail.com
@DragK20Civic2 жыл бұрын
Where did you get your new throttle body gasket from?
@crankyconrods74172 жыл бұрын
In the end customer decided they didn't want to get done , but I would try Renault first for gaskets that's what I do as they normally cheap and good Quality
@c4r5on882 жыл бұрын
I used high heat resistant gasket sealent on one of my builds which is a high performance motor and completely do away with the gasket from the manifold to the turbo so I'll be doing that on my master also as mine must of been leaking for some time or already non existent as everything is absolutely black 😂
@dave72ization2 ай бұрын
Hi i replaced my starter motor but still just clicks once and nothing, thinking its the starter relay but cant find a repair manual for a 2003 movano,any idea which relay is the starter relay?
@crankyconrods74172 ай бұрын
Hello and welcome. You say just clicks as in starter motor or the relay. Does it start good with a jump pack or jump starting from another vehicle or bump starting it. If so could be an earth issue
@dave72ization2 ай бұрын
@@crankyconrods7417 the solenoid clicks it sounds like,won't start from a jump pack either,does same click,it does bump start though,I had to bump start it going backwards at lake coniston lol
@dave72ization2 ай бұрын
@@crankyconrods7417 the AA came out to coniston and said your starter motors fried and battery failed a test,so bump started it and got home and fitted the new one,I charged the old battery which held a charge at 13.3 ...
@crankyconrods74172 ай бұрын
Have you got a good known battery spare to try on it. Look at the battery earth check terminals on battery ect. If all seem OK try putting a jump lead from something metal on the engine to body then at same time another one from a good earth point to negative on the battery.
@dave72ization2 ай бұрын
@@crankyconrods7417 AHH thankyou I'll try that later and let you know how it goes, thanks for replying and helping 👍👊