Repair my IVECO Engine

Iveco is common in cylinder leakage, and leakage of gasket will gradually aging time, need to tear open come down to the engine gasket replacement Through the detailed record and photograph, we can find out iveco treasure di 2.8 T engine internal details, like machinery and diesel engines friends don't miss! Two GoPro and a Sony micro single recorded the whole process is very interesting, including one GoPro through time-lapse photography condensed the maintenance process of the whole day to within a few minutes
依维柯中缸漏油比较普遍,密封垫会随着时间逐渐老化渗漏,需要把发动机拆下来进行密封垫的更换 通过详细的记录和拍摄,我们可以一探依维柯宝迪2.8T发动机的内部细节,喜欢机械和柴油发动机的朋友们不要错过哦!两台GoPro和一台Sony微单记录了整个的过程非常有趣,其中一台GoPro通过延时摄影把一整天的维修过程浓缩到了几分钟内

[@vomdingherr1147]

nice Teamwork!!!

[@GroteMayoPinda]

Great video man!!

[@feelautogp]

+GroteMayoPinda Thank you

[@LukaDrwal]

almost good, but you should throw all parts straight to the sand that would be much better

[@user-dr6yg1zv9c]

Неплохо !

[@Lukaszmajamen]

Good job, Janusze mechaniki. :)

[@viasajeepcj504]

How did you get the bolts off the engine oil sump? The video didn't show that. Between the pan and engine there is a small area to get the bolts off on each side side. Shouldn't have to take the engine out to do that but I'm at a loss to figure out how it can be done. Thanks, joe

[@chimaxsnigltd.winner5139]

I really Ned help on marine engines please

[@paolodonzella4736]

ma perchè lavorate in mezzo alla strada ?

[@thomaskulpa8285]

Hope they did not forget anythink :)

[@christiansourciertours3768]

BRAVO LES GARS

[@steisje]

What do you mean cylinder leakage? Bad piston rings or just the gasket?

[@feelautogp]

+steisje The cylinder gasket leaking

[@steisje]

+feelauto Ok. Thanks for reply and uploading the video. ;)

[@josepeixoto3384]

@@steisje Don't think so; bad translation from chinese; i think all this crazy work was only for an oil pan gasket leak,and maybe valve cover gasket for which most likely all that was needed was to re-tighten those oil pan bolts underneath, a 15 minute job,and replace the valve cover gasket,1 hour job at the most, with the engine in place, no engine removal!!! ah, well.... live and learn....

[@leguerrierdunord2823]

VIVE LA POLLUTION COMME VOUS SAVAS TRES BIEN LE FAIRE DANS VOTRE PAYS J AURAIS HONTE DE MONTRAI CETTE VIDEO

[@leguerrierdunord2823]

RIEN COMPRIS A CETTE VIDEO DEMONTAGE POUR RIEN

[@wierzbagarage767]

It is 2.8 TDI?

[@feelautogp]

yes

[@wierzbagarage767]

Thanks