Repair of lidl silvercrest trimmer

[@ahmadelhamian5044]

Thank you so much for the video 🙏 it's help me to open the part but i didn't get any results with the main board like you did... Do you know from where can i buy a parts?

[@jambacardi2474]

Thank you for putting this video out, as had to look on youtube on how to dismantle as have the same issue. Will dismantle tomorrow

[@trance_trousers]

Is it an 18650 battery in this trimmer? Mine isn't holding much of a charge any more and I need to replace it.

[@samteccomputermaintenance9981]

sorry for the late reply ita smaller size then the 18650 more like the AA

[@samteccomputermaintenance9981]

hi l had a look its a li-ion 14500 3.7v 700mAh 2.59Wh

[@trance_trousers]

@@samteccomputermaintenance9981 that's great, thanks!

[@meszarosp]

What model of battery is inside? Do you have the specifications, besides 3.7V? The picture was not clear enough to read the markings. Thanks.

[@jozsefledacs-kis2134]

Szia! Neked is akku gondod van? A mi nyírónk 100%-ról kb. 8 perc alatt lemerül. Köszi a választ!

[@meszarosp]

@@jozsefledacs-kis2134 Yes, bought trimmer in 2019 and now in 2023 the capacity of battery dropped suddenly. I tested for 2 weeks and the voltage remains steady so no self-discharge issue. Must be really only the capacity of battery. I can fully charge to 100% but then its depleted in constant use within 15min or less. Before 2023 it was working for 40-50 mins straight without any issues or recharging. Would have expected more life in Li-Ion battery then just 4 years. And it was not even used very frequently, maybe 5-6 times a year. I also made sure to keep it charged while not in use to prolong battery life. Never left it discharged. I couldn't have done more then 30 charge cycles on the battery so really poor battery performance on this product :(

[@vgtu1]

Next time you can make video in completely dark enviroment , because now i still can something to see

[@luismlc89]

dont be bad

[@pavelzitek4551]

To nejdůležitější, jak sundat kryt neukázal. Chtěl jsem se dostat k baterce.

[@meszarosp]

Did anyone else succeed getting the rotating cover separated from the inner housing? Its locked in place. I'm pulling on it with all my strength and it does not budge. I need pointers for this magic move. TY

[@sbmuthuraman]

this is a small plastic lock overmolded in the housing. the only way is to pull the top and bottom parts away from each other.

[@nunosergiomoniz1]

i dont understand how do you remove the body... jesus christ, i cant remove it... im going to break this thing to the wall...

[@JewelBoxHeaven]

The reason why I watched this was to see how to get the trimmer end back into the unit, and you didn't show that!

[@samteccomputermaintenance9981]

Sorry about that you have to push the backend first not the blade side. once that's in it just sits down in its place

[@JewelBoxHeaven]

@@samteccomputermaintenance9981 mine keeps springing back out again - won't click into place for some reason.

[@samteccomputermaintenance9981]

i have just uploaded video check if that helps you its called SilverCrest hair trimmer keeps coming off @@JewelBoxHeaven

[@madalinvasile1731]

Cum ai scos carcasa

[@Lakisleon]

18650 battery inside?

[@Oleg_Mykhailovych]

Дякую за відео. Найважче було зняти круглий корпус, але на відео не видно його кріплення. Батарейка 14500 3.7V 700mAh.

[@samteccomputermaintenance9981]

battery is good tested that

[@naz7004]

E2 what typ of error is this?

[@pericapericpericaperic7747]

Did you solve the problem? 

[@naz7004]

@pericapericpericaperic7747 yes, I throw it away

[@pericapericpericaperic7747]

@@naz7004 I solved the problem by removing the battery and putting it back

[@Onkoolayvoo]

At 5.35 when you just pull the rotating body off the main unit, I'm beginning to think you were just lucky. I've tried prying that part off, pulling it off, and have also tried to do this in each of the 5 blade length positions, just in case there are parts that need to align before they separate, all to no avail. Needless to say like many others in this thread, I can't go any further with this stripdown to replace the ailing 14500 battery. Frustrating...

[@technohot-x8y]

What is this piece SMD U1?

[@samteccomputermaintenance9981]

hi its not the smd u1 i tested it and found q6 and q5 faulty mosfits

[@LilliaMassimo]

L'unica parte che interessa ( come aprire!!) non c'è!!!

[@pofka3000]

send it to big clive

[@mikropigmentacjaskorygowym6184]

😘😍🥰💪🦾💪🙏🙏❤💚🖤💯