Thanks Bob. After the bathroom remodel was done and I was cleaning up I dropped my drill and of course it poked a hole in the tub. I thought I was gonna have to replace the tub. This did the trick. I watched a bunch a videos and this was the clearest simplest easiest to follow.
@evensteve2843 жыл бұрын
I've been watching a slew of these bathtub repair videos, and this is the best one. The masking tape trick, using the laminate sample as a flexible putty knife, and then using water with the sandpaper are great tips and make the job much easier!
@funbro13 жыл бұрын
Thanks for the compliments and thanks for watching.
@dannyc81672 жыл бұрын
Yea excellent video! I been intimidated by this repair but that changed my perspective, lol.
@2003evodave Жыл бұрын
LOL,,,,no! This was not how it’s done. He used way way too much filler.
@DaveyBlue32 Жыл бұрын
All us “frugal” or just super cheap dudes were all over that “free disposable puddy knife comment!!!! All of a sudden you’re going to be seeing several guy’s carrying out those laminate samples for the shop!!! LMFFAO! Well sir, what color laminate are you thinking about? Well, to tell you the truth she’s just all over the place and just has a hard time nailing it down so I’m going to need one of each color… that’s right son, all the color’s! Maybe two of them just so I can keep a set for when she loses her copies so she’s not back here bothering you with it!!! LMFFAO! 😂😂👍. I’m a big fan of laminate and I just love tossing in some cabinets and a little folding table in a laundry room or a little desk area and with the right router bit it’s super fast and looks clean and good and it’s pretty cheap and easy to use too
@MalikZahoor-wr9if8 ай бұрын
Where i get this kit
@GPortoulas2 жыл бұрын
I have a tiny hole / crack in my shower, close to the drain...found out this is where my leaking is coming from....this video was so helpful. Thank you!
@funbro12 жыл бұрын
Glad to hear it helped you, thanks for watching.
@erilynnechristiansen81874 жыл бұрын
Thanks so much for this helpful demo! My tub color wasn’t white but it wasn’t bone either, so I got both kits and blended both colors bit by bit until I got a close enough match. You gave me the know-how I needed. Keep making videos!
@funbro14 жыл бұрын
Glad it was helpful! Thanks for watching.
@lfeathers92 жыл бұрын
they make a Biscuit color now that is in between and matched my oddly colored tub perfectly just FYI!
@mrsdoolittlefarm Жыл бұрын
Your video has been of great help to me and I’m really glad I found your channel. Thank you.
@funbro1 Жыл бұрын
Thanks for watching.
@moniquemonicat2 жыл бұрын
Thanks a lot, we used your excellent tutorial for our Cramer chip repair (bone) kit (bought at home depot) and it came out great! we used an old credit card instead of laminate sample. The tape really helped. We used orange oil to remove the mixture that got on our fingers, came off in 2 seconds.
@funbro12 жыл бұрын
Glad it worked out for you, thanks for watching.
@BlackJet576 Жыл бұрын
Watched multiple videos on tub repair. Best of the best. Thanks!
@funbro1 Жыл бұрын
Wow, thanks!
@andrewsmallwood18583 жыл бұрын
Perfect, worked like a charm. From the product recommendation all the way to the know-how. Thanks How To Bob!!!
@funbro13 жыл бұрын
Our pleasure! Thanks for watching.
@DaveyBlue32 Жыл бұрын
Yeah man you definitely got it done! I use a little plastic cup like the food delivery restaurant down the street puts the ranch dressing in…I just go grab a couple from my buddy over at his restaurant and have some lunch so he’s happy to give me a couple… I usually use a little bit more harder so it’s kicking fast and it’s hard and ready but if you find that it’s going slow then add the hot blast from the hair drier to help it kick and hardened up for you! I usually put the tape back and sand then I can watch the depth and stay just on top of it…. I usually use the “The Works” or another acid based dollar store brand toilet or bathroom cleaner to get it super clean then I’ll repair it and then I use a automotive cutting compound super light cutting compound and my buffer and I’ll wax it back up and those little repair’s disappear behind the shine! LMFFAO! You can use an acrylic cleaner and polish and get a good result to…
@neilayers4962 жыл бұрын
The best video I’ve seen! Thankyou
@funbro12 жыл бұрын
Sweet, thanks for watching.
@bart1meuz4 жыл бұрын
My tub has several holes like that. I am going to be refinishing my tub anyway. Perfect timing with this video as I was not sure how to fix that.
@funbro14 жыл бұрын
Glad I could help! Thanks for watching.
@mimijohnson77144 жыл бұрын
Thank you, after watching this video I think I can do this repair, much appreciated!
@funbro13 жыл бұрын
Glad to help, You got this. Thanks for watching.
@princessprincess12083 жыл бұрын
⁰
@BigGun19112 жыл бұрын
Thank you Bob, this helped me out big time!
@funbro12 жыл бұрын
Glad to hear, thanks for watching.
@traceyfromkc2 жыл бұрын
thank you for this! just bought a house and discovered that the tub has a chip on the floor of it, and i was worried that i'd have to reglaze the whole thing. as soon as i figure out what kind of tub it is (porcelain or fiberglass), i'm going to give a DIY repair a try!
@funbro12 жыл бұрын
Awesome, I wish you the best. Thanks for watching.
@RB-gt8bf2 жыл бұрын
Thank you SO Much.....I was hoping there was a good simple tutorial on youtube to show me how to fix like a pro. My chip is about the same size as the one you are demonstrating!
@funbro12 жыл бұрын
It should turn out very good then and last a long time if done correctly. Thanks for watching.
@RB-gt8bf2 жыл бұрын
@@funbro1 the thanks goes to you!
@JDL_20203 жыл бұрын
Good video, thanks. I save all my old credit card, license, cards received in mail etc., to use for scraping/striking off jobs like this.
@funbro13 жыл бұрын
Sounds like a plan, thanks for watching.
@ghafarabcd2 жыл бұрын
You did good job
@funbro12 жыл бұрын
Thanks for watching.
@lindabooska70493 жыл бұрын
Wow now I can tackle my 2 tubs that have ceacks. Thank you so much!
@funbro13 жыл бұрын
Glad I could help! Thanks for watching.
@dutchgirl174 Жыл бұрын
just ordered my kit on amazon. awesome video. thank you
@funbro1 Жыл бұрын
Awesome! Thank you!
@lynisewalton98823 жыл бұрын
So glad I stumbled across your tutorial. I loved the idea of using painter tape...definitely helps keep the project looking clean. My three hour timer is set and fingers-crossed I get the same finished result. This single mom thanks you! 🤗 #newsubscriber
@funbro13 жыл бұрын
Glad you found it helpful, thanks for watching.
@cjwalthall112 жыл бұрын
I myself a single mom and im off to go find this kit and do two spots in my tub. I sure hope i can find this kit.
@funbro12 жыл бұрын
You can always find it online.
@Dani282235 ай бұрын
ME TOO, single mama and when I found the chip, I was distraught. But I CAN do this!!!! I'm inspired and on my way to fixing it
@spcpitts2 жыл бұрын
When I was managing an apartment complex the owner made me do repairs with standard automotive bondo fiberglass repair. Looked like crap. This looks like a way better quality solution. I just ordered some for my own tub.
@funbro12 жыл бұрын
This worked good for me. Thanks for watching.
@TrendysBeautyBar2 жыл бұрын
You did a wonderful job thanks for the video same size hole in the same spot in my tub
@funbro12 жыл бұрын
Thanks for watching.
@terryhastry4942 жыл бұрын
Ty. Your also a good teacher. Ty
@funbro12 жыл бұрын
I appreciate that! Thanks for watching.
@iamtaliba.divine.love1322 Жыл бұрын
Very good and thorough video…thank you. 🙏🏽
@funbro1 Жыл бұрын
Thanks for watching.
@mrshawndon89 Жыл бұрын
This stuff is great for the sides and any part that has no one standing on it if your tub has good support under it then it will also be good but if you don’t have support under the tub it’s not the best my tub keeps crack and I used it twice
@funbro1 Жыл бұрын
This stuff is more for a hole and probably will not work as good in a crack that is not supported. Thanks for watching.
@betsabemaldonado10603 жыл бұрын
Excellent video! Thanks!
@funbro12 жыл бұрын
Glad you liked it! Thanks for watching.
@glenmilner98283 жыл бұрын
Great video, really useful. Only issue is the product, trying to find something like this in the uk is tough. America is always better for getting specialist items like this.
@funbro13 жыл бұрын
That makes it difficult to do the needed repairs. Thanks for watching.
@glenmilner98283 жыл бұрын
@@funbro1 the US has places like Lowes where you can buy a lot of specialist items for specific jobs. In the uk you have mostly B&Q, I worked for them for a few years so can say first hand it’s very limiting.
@drownedsilver5853 жыл бұрын
Good explanation and right to the point .. thanks 🙏
@funbro13 жыл бұрын
Thanks for watching.
@kailyguerra18594 жыл бұрын
Thanks!!!! We will be trying this soon!
@funbro14 жыл бұрын
Thanks for watching.
@SVMSICE2 жыл бұрын
Like MAGIC! That was cool.
@funbro12 жыл бұрын
Worked great, thanks for watching.
@michaelblum65372 жыл бұрын
Great tips here. Thanks so much!
@funbro12 жыл бұрын
Thanks for watching.
@JR007x4 жыл бұрын
wow, outstanding, thanks for sharing! i agree, can you link the kit you purchased?
@funbro14 жыл бұрын
It was purchased at Lowes. Also available on Amazon. Hope this helps, Thanks for watching.
@marcarvermeulen Жыл бұрын
These are clear instructions; so helpful. I have a chip on my 1964 fiberglass day-sailer sailboat. Do you think I could also use this kit on that?
@Lilqueen._2 жыл бұрын
Amazing! 10/10 man 👌 thanks for this!
@funbro12 жыл бұрын
Glad you liked it!
@user-jq9in9tx6d3 жыл бұрын
Great video! I have a crack on the fibreglass (or is it acrylic, not sure, looks like plastic for me but I am not a specialist). I dropped a heavy plastic container with 5 l of water in it and the bath cracked (not the plastic container!). It is 3 X 4 cm - it is a total area to repair. The crack is deep so the water can run through it. I am in doubts which product to chose to repair, the one like you show in the video or the one with a fibreglass cloth patch?
@funbro13 жыл бұрын
It’s sounds like you may need to use the one with the fiberglass mat. This one is more for small fixes. Thanks for watching.
@EXF_Emmons Жыл бұрын
this is a great video and so much better than the other ones I've seen. I have hairline cracks in my tub. I don't think water is getting in there, but should I repair it anyway?
@funbro1 Жыл бұрын
It sure would hurt and what do you have to lose? I would go for it. Thanks for watching
@proclaimchrist83528 ай бұрын
Thank you for this video. Will this work with a 1”x1/2” hole. Thank you.
@funbro17 ай бұрын
That may be a little bigger than this product will work on. I suppose if you back up the hole with something it might work but no guarantees. Thanks for watching.
@donaldclay82482 жыл бұрын
You're a legend
@funbro12 жыл бұрын
I don’t know about that but thank you.
@PotentialofHydrogenClean Жыл бұрын
Can I use an orbital sander (applied way too much fixer and sanding by hand will take forever) or will I risk damaging the fiber glass tub? Also repaired a porcelain sink and have the same problem.
@funbro1 Жыл бұрын
The only thing I would be worried about using an orbital sander is that it may remove a larger area than you really want to, but other than that, I don’t see why you could not use one. Hope this helps, thanks for watching.
@thejeepjunkie Жыл бұрын
Appreciate the video!
@rajaraj-uo7dx3 жыл бұрын
That was simply superb......
@funbro13 жыл бұрын
Thanks a lot 😊
@lizanne76278 ай бұрын
Thanks for the video! About to repair a nearly identical chip on my tub. I’m wondering how long the smell lasts after it dries/cures?
@funbro17 ай бұрын
Usually a few hours, with a window open and a fan, maybe less. Thanks for watching.
@shanecasmith94913 жыл бұрын
What’s your recommendation for repairing a chip that’s smaller than pea-size? It almost looks like the paint is removed and you can see the unpainted fiberglass or plastic.
@funbro13 жыл бұрын
I would follow this video just as it is. That should make your tub look like new again. Hope this helps, thanks for watching.
@matthewr782Ай бұрын
Hey bob where did you find that kit was it at lowes or home Depot and what are other similar kits that you know of thanks!
@syedjavedahmad97192 жыл бұрын
You missed one tiny spot while sanding, good thanks for the tutorial.
@funbro12 жыл бұрын
I didn’t see that it must’ve been so insignificant that it really would not of mattered. Thanks for watching.
@nonna617 Жыл бұрын
thanks so much I am going to try this!
@funbro1 Жыл бұрын
You got this, thanks for watching.
@theStranger300310 ай бұрын
Hi do you have a link for the repair kit you used please ?
@funbro110 ай бұрын
Amazon.com, lowes.com, Google.com or any hardware store should have them. Hope this helps, thanks for watching.
@tiffanyf33213 жыл бұрын
Awesome Job.
@funbro13 жыл бұрын
Thanks for watching.
@Theweeze1003 жыл бұрын
Fantastic! Thank you, Subscribed!
@funbro13 жыл бұрын
Awesome, thank you! Thanks for watching.
@korn66684 ай бұрын
Exactly what i was looking for
@funbro13 ай бұрын
Awesome, thanks for watching.
@williemartin86722 жыл бұрын
Brilliant. Thank you.
@funbro12 жыл бұрын
Thanks for watching.
@myhobbyguitar41173 жыл бұрын
Thank you for the demo....
@funbro13 жыл бұрын
Thanks for watching.
@olgamezhova9748 Жыл бұрын
How long will this fix last? We have couple tiny holes next to the drain and given current mortgage rates to replace the whole thing, we’re hoping to win couple years with the quick DIY repair.
@m.h.13273 жыл бұрын
Awesome job!!!
@funbro13 жыл бұрын
Thanks for the visit, and Thanks for watching.
@chuckkasabula3 жыл бұрын
My first attempt didn't come out as well as I'd hoped. Ordered white, but should have got bone. Color doesn't match. Also, on one of the damaged areas, the sanding removed too much of the material. Waited over 3 hours. Used 5 drops of hardener. Thinking b/c of the temp, I should have used 4? I have to decide what I'm going to do. Order bone color, file it down and redo, or just redo bad area again with the remaining product I have and live w/ the color mismatch.
@funbro13 жыл бұрын
It depends on how much the mismatch bothers you. Thanks for watching.
@juanitagoodwyn11913 жыл бұрын
What is the name of the product used to repair the tub and where can you buy it?
@funbro13 жыл бұрын
:42 in the video. Thanks for watching.
@larrybenedict62933 жыл бұрын
Lowes
@autumnmorita987 Жыл бұрын
excellent video! step by step, very clear. how long to take for it complete cure for shower ? is the gel paste smell strong? thank you
@funbro1 Жыл бұрын
It usually takes a few hours to fully cure depending on the temperature and the smell was not too bad at all. Thanks for watching.
@autumnmorita987 Жыл бұрын
@@funbro1 Hi thank you fro reply my msg. my bathtub's paint coming off expose the light brown color surface( 7cm) and it looks different on your video. maybe different type of bathtub. I don't know what material my bathtub make of. and do you think this product works for my bathtub. also, if leave it alone and not fix it. can it cause leaking? i don't have any experience about bath tub. thank you
@TheJdeweys4 ай бұрын
Do u think this would be a permanant fix or would it have to be redone after a few years?
@funbro13 ай бұрын
Depending on how much abuse the tub gets it should last a good long time. Thanks for watching.
@smartanajones4u2 жыл бұрын
Great video. Just wish you put a link to the product
@funbro12 жыл бұрын
I am not sponsored or paid by any prouder in this video. Thanks for watching.
@jozefdkois2 жыл бұрын
Hi Bob. that's an enviable result. Was that a through hole or just a chip? Thanks
@funbro12 жыл бұрын
The damage was through the tip layer but not all the way through the tub. Hope this helps. Thanks for watching.
@jozefdkois2 жыл бұрын
@@funbro1 and how long does it take for the chemical odors to go away?
@funbro12 жыл бұрын
Usually a couple days.
@denisberube8889 Жыл бұрын
Hi Bob I have watched your video many time. I have gone to Home Depot lowes and a couple of marine shop but nobody sells this stuff. How can I buy it. Many thanks Denis Vancouver BC
@funbro111 ай бұрын
Lowes sells it? Item # 26671. Hope this helps. Thanks for watching.
@mollykulp1834 Жыл бұрын
Can this be used for the plastic parts of a tub too like shelves?
@funbro1 Жыл бұрын
This product should work on acrylic as well. Thanks for watching.
@jaydee30463 жыл бұрын
Is this tough enough for floor traffic? I have some chips in ceramic floor tile, and they are growing. The colors offered might be mixed for my tile colors, as they are faux marble.
@funbro13 жыл бұрын
I don't know if it is designed for this application but it would be worth a try. It's pretty tough stuff. Let us know how it works out. Thanks for watching.
@bonannjr Жыл бұрын
Thank you. But what happens if it’s close to drain.
@funbro1 Жыл бұрын
That might be a problem, you could give it a try what do you have to lose. Thanks for watching.
@sisqokid79787 ай бұрын
Would have been nice to know what product you used!
@funbro17 ай бұрын
“Would have” is past tense which tells me you have not watched the video or you would have seen what product was used in the video starting at :43. Hope this helps.
@funbro17 ай бұрын
“Would have” is past tense which tells me you have not watched the video or you would have seen what product was used in the video starting at :43! Hope this helps.
@313SSCHEVY11 ай бұрын
Where do I get this?? I literally just put a hole in the tub
@funbro111 ай бұрын
Online or at many big box stores except Home Depot. Hope this helps, thanks for watching.
@syedjavedahmad97193 жыл бұрын
thanks for the tutorial.
@funbro13 жыл бұрын
You're welcome! Thanks for watching.
@dianawoods6991 Жыл бұрын
What is the product? Link?
@Eloasisfabi Жыл бұрын
En Colombia como se llamará este producto
@funbro111 ай бұрын
Fiberglass tub repair kit?
@dootscat37982 жыл бұрын
If you want to repair another hole later with the leftover kit, is possible?
@funbro12 жыл бұрын
I don’t see why that would work depending on how long till the next repair. Thanks for watching.
@gabyflores9412 Жыл бұрын
My tub spontaneous broke, it sounded like glass shattering, so strange. Hope this helps
@funbro1 Жыл бұрын
Hope do too. Thanks for watching.
@visforvegan89 ай бұрын
How large a hole can you patch?
@funbro19 ай бұрын
Probably about the size of a quarter would be all that I would want to try. Thanks for watching.
@glennarhodes67532 жыл бұрын
I have a fiberglass shower surround that was poorly repaired. As in, the filled in the hole wasn't totally filled nor was the surrounding area smoothed out. There isn't a hole now but there must have been at one time. Can I sand over this old patch and fill it in with new stuff to smooth out the dimple/dent (not a hole)? It looks tacky the way it is now!
@funbro12 жыл бұрын
You should be able to remove some of the old patch and replace it with the new stuff. Hope this helps. Thanks for watching.
@glennarhodes67532 жыл бұрын
@@funbro1 The best way to remove old patch? Scrape it? Sand it by hand or with sander? Thanks for taking the time to respond!
@funbro12 жыл бұрын
If you have a Dremmel that would be where I would start. I would use a small sanding barrel on the end. Just how I would tackle it, I’m sure there are many other ways.
@glennarhodes67532 жыл бұрын
Perfect! I just bought a Dremel last week. Thanks again!
@EvangelinaLopez3263 жыл бұрын
Link to repair kit: www.amazon.com/Tub-Shower-Repair-Kit-White/dp/B00KO6LTO6/ref=mp_s_a_1_4?dchild=1&keywords=tub+and+shower+repair+kit&qid=1607122549&sprefix=tub+and+shower+&sr=8-4
@funbro13 жыл бұрын
Thanks for sharing.
@Fluffierchief73 жыл бұрын
Would this work on a crack tub or just in a hole?
@funbro13 жыл бұрын
It’s probably meant more for holes because a crack could potentially continue to crack depending on the cause of the crack. A crack will only be supported on 3 sides while a hole is supported on all side giving more strength to the repair. Hope this helps, thanks for watching.
@boombaby67777 Жыл бұрын
What materials did he use
@funbro1 Жыл бұрын
Just the materials pictured in the video. They were bought at a local hardware store. Hope this answers your question. Thanks for watching.
@thomasrobertson5474 Жыл бұрын
Would this work for a 3-4 in "hairline" crack on the side of a tub that really is not a hole or a nick but cracked enough for water to get through?
@funbro1 Жыл бұрын
It is meant more for a hole or small chip, I don’t know if it would hold up in a crack. Thanks for watching.
@thomasrobertson5474 Жыл бұрын
@@funbro1 Thank you for your quick reply. In your experience what would you suggest?
@dootscat37983 жыл бұрын
Can I use this technique for a fine radiating crack as well? Thanks again.
@funbro13 жыл бұрын
This is meant to be more for a hole or dent. A crack may continue after the repair is done. You could try it or replace the tub. Thanks for watching.
@dootscat37983 жыл бұрын
Thanks for the video. My defect looks similar. What’s missing is a thin oval layer. How do I tell if it is fiberglass? Thanks.
@funbro13 жыл бұрын
This works for fiberglass or acrylic so as long as you do not have a steel tub. it should work. Try using a magnet to verify.
@3rdeyeblaque3 жыл бұрын
How Long do you have to wait to let the paint dry? I have a hole in the shower portion of the bath tub (made of the same material as the tub) from an incense stick. I happened to buy the same kit. So I'm going to give this a try!
@funbro13 жыл бұрын
I waited overnight to make sure it was set up. Thanks for watching.
@timpatterson5905 Жыл бұрын
Except the colors never match up exactly because of fading but good video
@funbro1 Жыл бұрын
Still better than a hole. Thanks for watching.
@michaelupsala4203 жыл бұрын
great work! are most bath tubs made of fiberglass? I have a tub but it seems like it is plastic
@funbro13 жыл бұрын
Fiberglass or plastic (acrylic) but the repair is the same for either one. Thanks for watching.
@sylquonodoms73943 жыл бұрын
I noticed a very small hairline crack in the tub, will this method still patch the crack ?
@funbro13 жыл бұрын
It is meant to repair chips, I don't think it will help a crack because the crack will just keep moving as the tub flexes. Thanks for watching.
@sylquonodoms73943 жыл бұрын
@@funbro1 $#!@ !!!! i already used it on the inch long crack . I covered an inch of space around the crack with the stuff.
@NhatNguyen-xs7kl2 жыл бұрын
@@sylquonodoms7394 it’s a year later, how is it holding up? I have a hairline crack in my tub also. And did the color match?
@sylquonodoms73942 жыл бұрын
@@NhatNguyen-xs7kl Still holding.
@NhatNguyen-xs7kl2 жыл бұрын
@@sylquonodoms7394 nice, I guess I’ll give it a try. How’s the color match? Is it off white or bright white?
@justafan3233 жыл бұрын
Wondering how long that took? Seemed like a lot of work for such a small hole!
@funbro13 жыл бұрын
It really only took a few minutes, other than set up time but it was worth it when finished. Thanks for watching.
@aintbiggerthanme10092 жыл бұрын
Did it stay seal after the bath was filled with warm water and a grown adult in the bath 👍🏼 tia
@funbro12 жыл бұрын
That is not necessary to do for this repair. Thanks for watching.
@denisberube88892 жыл бұрын
Great video Bob. Where can you buy this product? Thanks
@funbro12 жыл бұрын
Lowe’s or pretty much any big box store or online places like Amazon. Thanks for watching.
@monkeychic36553 жыл бұрын
how long do you wait before using the bath again and how long does it last. My chip is near the drain. thanks
@funbro13 жыл бұрын
Wait from 1-3 hours depending on the temperature. How long it will last depends on usage. Thanks for watching.
@mpilondlovu91222 жыл бұрын
How much does a kit cost
@funbro12 жыл бұрын
Under $20. Thanks for watching.
@ToniT02682 жыл бұрын
Any idea what I could use to colour it pink as our damaged shower tray is a dusky pink colour?? TIA!!
@funbro12 жыл бұрын
What I have done in the past for enamel touch up paint for tubs is to go to the paint department and pick a like color of paint and tell the person that works the paint department to mix that color for you in a sample size, BUT instead of putting the tint(colorant) into the container I get them to put it on a piece of cardboard. Now I have all the colors I need to make the touch up at least closer if not exactly the same color as my tub. I’ve done this many times with touch up paint so I don’t see why it would not work for this repair kit. The hard part is talking to someone in the paint department that will actually do this type of thing for you because it requires thinking outside of the box. They will try to tell you that it will not work and I can tell you that it does work for the little touch up containers that they sell. Hope this gets you in the right direction, thanks for watching.
@ToniT02682 жыл бұрын
@@funbro1 many thanks for that info - most helpful!! 👍👍
@christinestol2214 жыл бұрын
What did you use and where can I get it? I have a huge chunk missing from the bottom of my tub. Thanks!
@funbro14 жыл бұрын
At :44 in the video it shows what I used. Can be picked up at any hardware store, I got this one at Lowe's. Thanks for watching.
@carlargon40993 жыл бұрын
That’s awesome! Question. How much do you charge to do a job like this?
@funbro13 жыл бұрын
Just guessing around $100. Thanks for watching.
@forbiddenbud3 жыл бұрын
Would I be able to use this on a much bigger hole mines is about palm size
@funbro13 жыл бұрын
If it’s that big you may need something to back it up or it could crack. This works best on smaller holes, or chips. If your options are to either try it or replace the tub then I would give it a try. Hope this helps, thanks for watching.
@forbiddenbud3 жыл бұрын
@@funbro1 would it make a difference if it was on the side of the tub? Because it’s not anywhere close to the floor it on the side of the tub kinda higher up on the side where you walk out
@funbro13 жыл бұрын
It may be worth a try.
@amrdowidar Жыл бұрын
What is the grade of soft and hard sand paper? Thanks
@funbro1 Жыл бұрын
I would go with a 400-600 wet/dry paper. This kit came with some paper. Hope this helps. Thanks for watching.
@oflow100 Жыл бұрын
I’ve seen people in other videos say if it’s a crack you should drill small holes at the ends of the crack to keep in from running later after the patch. Do you recommend this? I’m currently trying to patch a crack that’s sort of like the hole you patched here but it’s not a complete punched out hole it’s more like a C- shaped crake about the size of a nickel.
@funbro1 Жыл бұрын
At some point what do you have to lose. Trying it out would be much better than replacing the whole tub, and cheaper. I’d say go for it. Thanks for watching.
@appalachianashley2 жыл бұрын
Would this work for an enamel tub too?
@funbro12 жыл бұрын
This is meant for a plastic/fiberglass tub. Am enamel tub should not get a hole it it…maybe chips or a dent and those would be fixed with touch up paint. Hope this helps, thanks for watching.
@seesylee65423 жыл бұрын
Sir, may I know the brand? Sorry I cannot read the brand in the video.
@funbro13 жыл бұрын
The brand for the repair kit in this video is Keeney. Hope this helps, thanks for watching.
@pkl19973 жыл бұрын
Can I do the same thing for a crack? I’m going to try and fix it myself
@funbro13 жыл бұрын
Depending on the crack and why it is there, you should be able to use this product. Thanks for watching.
@dianawoods69913 жыл бұрын
Do you have a link for kit? Thanks for video as I need some repairs 😊
@funbro13 жыл бұрын
Sorry I do not have a link, I bought it at the local hardware store. Hope this helps, thanks for watching.
@repairvehicle4 жыл бұрын
Where did you get kit from?
@funbro14 жыл бұрын
It was purchased at Lowes. Also available on Amazon. Hope this helps, Thanks for watching.
@ashwinshrestha91383 жыл бұрын
Whats the product name? And can it be used on bigger holes then this
@funbro13 жыл бұрын
Name is shown in the video and it can be used in larger holes. Hope this helps, thanks for watching.