Repairing a GM cluster someone tried to repair that was sent off to repair.

[@jeffescortlx]

For contact information follow this link: kzbin.info/www/bejne/ipCViKGAgtiNl7c

[@mikesauve9381]

I've been binge watching your videos. I love how clear you are with your explanations and actually showing the repairs. I've picked up some soldering tips that will help me in the future. Thank you

[@jth1987leb]

You have a cute quality control there 😆

[@DianneGerrity]

Jeff, thanks for the great job on my 04 suburban cluster repair, it works great.

[@DianneGerrity]

And is still working great. Thanks! Just saw your video about how to contact you. Thank you for taking on my cluster repair although I was out of your physical area. I realize now I should have contacted a Florida service tech. Hope you are well.

[@leonciobarbosa6198]

THANK YOU MAN! comprehensive , no bullshit, no loud ass dubstep. i will get some friends to subscribe and like . i never thought it was possible to do tracers with solder ......

[@PresentedByBailey]

hmmm, at the moment there are 8 dislikes for this video 1. the guy who makes replacement clusters and now has one less sale 2. that guy's employee 3. the guy in Wisconsin that decided not to even try and now looks bad 4. Spielberg's aspiring cousin who was irritated by the one second of blur here and there in the video 5. the guy who has a phobia against orange and white cats 6. the guy that thinks the video should have been 5 minutes or less because he's so busy and so important 7. the guy who thinks his soldering skills are so much better 8. the guy who (happens to subscribe to scotty kilmer because he) loves toyota so much and hates GM otherwise, I can't find any reason someone would dislike this video.

[@jamescowindowcleaning3756]

😮 nice work! I think I watched this 4 maybe 5 times. Just tried to fix my cluster with no luck. I hope your channel grows and grows cause this is great info. Thank you!

[@arifbustani]

Your soldering skills are awesome.

[@frankmehl9990]

Very impressive, more of the fact that u attempted the repair , even after a botched job , u would b very valuable at my auto repair business , skilled art for sure , i cant tell u how many places say they can repair clusters , and they return , well destroyed, and about 5 days wasted . Very impressive

[@jeffescortlx]

Thanks 👍

[@frankmehl9990]

Its hard to impress me, I csn send ,, ship , u alot of thise if U would like the work, I own a very very busy auto repair Shop , and the places around here well there hacks , Say they can fix , then don't even call me , send it back un repaired , and then im stuck finding another source

[@jeffescortlx]

@@frankmehl9990 sure. My contact information can be found here: kzbin.info/www/bejne/ipCViKGAgtiNl7c

[@Fyrchiken]

I have a GM cluster that needs rebuilt. Where can I find more info on your repair services??

[@WJHandyDad]

I replaced my motors with mixed success. All the ones that were working before are still working except for the gas gauge (it is now "dead"). The oil pressure (was broken) is now fixed. Tach (was broken) jumps to about 500 rpm and stays. Speedo doesn't sweep smoothly, it kind of ticks up and down almost "digitally" if that makes sense. Obviously soldering these is not an easy skill - so thumbs up to you with your amazing soldering skills. And congrats to being way over 1000 subs now. Unfortunately since you are a cat owner and I am deathly allergic to cats, I can't send mine to you for fixing so I'll have to see if I can fix it or live with it.

[@jeffescortlx]

Sounds like you have the typical pull ripped pad problem. Stepper motors do funny things when it doesn't have all 4 pins connected.

[@WJHandyDad]

I checked continuity between the pins and the next spot on the board and they all had continuity, but I'll re-check them and may have to try your little "jumper" trick.

[@jptrustno1]

Dang, ur pretty good at that. Great workmanship. U know what ur doing, very confident, props for ur efforts and time learning what u do.

[@sunheeferguson362]

anyone with a GM needs this.

[@therealhip9321]

Really nice work.

[@JazawaToad]

I learned some stuff from this video. Was also super impressed with how well you handled repairing that, although it seems its become natural for you as it sounds like you do this as a job. Congrats on way surpassing 1k subs in just over a year since the date of this video btw, thats pretty awesome. Also shoutouts to the actually adorable cat in the beginning, made the video that much better.

[@juanmartinez8457]

Excellent Workmanship keep on trucking...

[@davidwright1653]

I had to pause the video from laughing so hard with the cat just helping itself to your work pad. Great repair!

[@jamesmcdaniel38340]

Jeff you are really close now my friend! You are going to make it buddy...Keep up your good work and awesome repair videos! Thanks James

[@jeffescortlx]

Yep I'm at 975! Talk about cutting it close.

[@jamesmcdaniel38340]

Jeff buddy I have been signing up all my friends! If you see a lot of Tennessee and Mississippi folks here lately then you will see me and my friends! : ) JamesYou are going to get the 1K and then some I believe as well! Well deserved for your work and efforts!

[@jeffescortlx]

Thanks it's appreciated. Looks like I should make it, or at least be very very close. I still have 20 days to go.

[@jamesmcdaniel38340]

thank you jeff

[@bradcrooks3891]

You do a nice job on the clusters

[@NuWavUSA]

I just received at 08 GMC. Backlights are fine. It has an intermittent issue . Sometimes it will power up , move the needles, display turns on and then dies except for backlights. When it dies the 12vdc drops from the 3 leg regulator. I can put 12vdc from my l supply on it , but same thing . I just scraped it. Have you ever seen this issue . I think it’s a cap issue , but I don’t have an esr meter , the aluminum caps are within spec using multi meter cap value test . Ty sir

[@jeffescortlx]

Its the processor. Put the board in the freezer and it will quit, hit just the cpu with some hot air and it will work fine.

[@NuWavUSA]

I’ll try the freezer and hot air ... ty again

[@jeffescortlx]

The chip is obsolete from reputable sellers. I not smart enough to load the software on a new one anyways :(

[@NuWavUSA]

Same here I’m just smart enough to do the eeprom .., ty

[@michaelbegay9573]

The cat has no more static in its fur after laying on the mat. 🙀😸😹

[@user-ty9lh9ze1d]

Jeff you should be using fume extractor (If you're not already using one, or perhaps you are using lead free solder) but either way those fumes are not healthy. Great video as always keep it up.

[@wtfiswiththosehandles]

Lead emits vapors at much higher temperature than achieved when soldering, so no difference if he uses lead-free solder (except for solder joint longevity that is).

[@dranoelr]

@@wtfiswiththosehandles Fume extractor is mainly for the flux vapors.

[@wtfiswiththosehandles]

@@dranoelr I know... It's the op who suggested lead free solder is better for health.

[@mike7958]

Great video Jeff. I just love it when you talk to the customer beforehand and they tell you they tried to repair it themselves and spout out the infamous words "I just couldn't get the solder to stick". You then know exactly what you're in for before you even see the board. And BTW, who's doing the repairs over there, you or Garfield?

[@jeffescortlx]

Yeh, I've become numb to the "solder wont stick and now non of them work" message. But the more of them I do the less frustrating it becomes. That damn cat has no fear. He's just in it for the dead bugs that fall out of clusters.

[@deanclark8619]

Another nice video. Did one of those repairs a couple days ago. Seems like they always take out the MPH pads. Good luck on your 1000 subs. I think you'll make it with some to spare.

[@jeffescortlx]

Yes, it does always seem to be the MPH that's mostly ripped off. It's going to be close if I make the dead line. Did you get my PM about the S-10 cluster?

[@edwardmyers1746]

Such a fluffy cat 😍 and well behaved

[@MaicSalazarDiagnostics]

Hi Jeff, I have a board from a Jaguar fuse box that no is no longer produced. I see that some of the components are very close on the lay out of from instrument cluster in GM. Where do you get the board schematics? Or can you share a 2002 GM cluster board schematics to see if I can help this shop from TX. I am trying to see the function of an IC but can’t find any info.

[@jeffescortlx]

I do not have schematics for the 99-02 clusters. But I don't see how that would be helpful on a jaguar fuse box board. Can you pull Somme numbers off the chips your trying to ID?

[@MaicSalazarDiagnostics]

@@jeffescortlx Thank you I got the schematic from Delphi.

[@jamesmcdaniel38340]

Jeff what kind of jumper wire are you using on this particular repair sir. You make it look so easy...Thanks James

[@jeffescortlx]

The bare wire I'm using is just light bulb leads. The coated solid strand is transformer wire aka magnet wire or coil wire.

[@jamesmcdaniel38340]

Thanks Jeff. I am sending texts to my friends and working on getting you closer to that 1000 mark sir. I hope you make it! Thanks my friend! James

[@jeffescortlx]

KZbin has made some changes that effect the smaller channels. Channels with less then 1000 subs will no longer qualify for monetization. At the posting of this video I'm at 946. Hope to make it to 1000 before the cut off date!

[@bryantace4463]

jeffescortlx Good work! I'll have some of my buddies sub.. Quick question what can it be if I soldered all resistors but my cluster still won't turn on. Only at random times. Thanks

[@bryantace4463]

jeffescortlx also when is the cutoff date to go over the 1k Mark?

[@jeffescortlx]

Would need some closer trouble shooting. Tough to do without hands on.

[@jeffescortlx]

Under the new eligibility requirements announced today, your KZbin channel, jeffescortlx, is no longer eligible for monetization because it doesn’t meet the new threshold of 4,000 hours of watchtime within the past 12 months and 1,000 subscribers. As a result, your channel will lose access to all monetization tools and features associated with the KZbin Partner Program on February 20, 2018 unless you surpass this threshold in the next 30 days. Accordingly, this email serves as 30 days notice that your KZbin Partner Program terms are terminated.

[@jamesmcdaniel38340]

jeff I will have some of my friends subscribe to your channel my friend! Your channel is my favorite one and I watch you now I just found it about a month ago all the time sir! I will do what I can to help sir! You will see your number of subscribers rise this weekend if I can get it done. Thank you and awesome job on that repair sir! James

[@Insan3Asy1um]

11.8K subs now! Congrats!

[@ilaisaanejr]

Wow this video is really helpful but I tried to fix my stepometer on my own and failed twice to fix it. Now some of my clusters work and the others dont work. Jeff can you help me out. Ive been driving with dead clusters for 6 months. Any advice. Wish I could have fix my problem. Thanks

[@YTInnovativeSolution]

How deep is your knowledge on the GM clusters? I built a highly modified 2000 Impala and it has the cluster from a 2001 Monte Carlo SS. One of the things I would love to do is change the functionality of the PRNDL21 indicator so it will highlight the actual gear the transmission is using in real time instead of showing where the shift lever is physically positioned. I have an indicator at the shift handle that works fine and I know what position I put it in when I drive. It's redundant to show this info on the cluster and being a modified car, this would be one very cool mod to add to the list. Have you ever performed a mod like this before?

[@jeffescortlx]

This would be more at ECU level programming. The cluster is simply only displaying what it's told through the serial data wire. I don't have the ability to do this mod. Also don't know how much lag you would see from when the ECU sends the signal until it's displayed on the cluster.

[@rhkips]

Loving these videos! Do you only work on GM clusters, or others as well? I've got an '04 Jaguar S Type that needs its 16x2 LCD display replaced (UV damage/fading/delamination). Back to binge-watching everything on your channel! Too cool! Thanks for sharing all these. :D

[@jeffescortlx]

I'm normally open to fixing anything, but currently being kept busy with GM clusters.

[@bumpinz]

I found this video while looking for help trying to solve an issue with my DIC not illuminating. I reflowed the bank of 7 resistors, but the DIC still is intermittent. I have the updated board, the same as is in this video. Any guidance, would be appreciated

[@jeffescortlx]

The bank of 7 resistors are only for the prnd321 and not the driver info display. The driver info display has its own power supply to the left of the VFD. Also check the VFD hot wire end leads solder joints.

[@bumpinz]

@@jeffescortlx thanks for the response. The odometer is intermittent in working, if I tap around the mph stepper motor, it goes on or off, or on the board anywhere it will as well. It just takes a bit more of an jarring to cause the same issue

[@jeffescortlx]

@@bumpinz yes that's typical for having fractured solder joints somewhere.

[@92greenz34]

Any ideas on how to fix a “dead” cluster? Steppers are fine, but the cluster only gives cel and turn signal lights no stepper motors move at all. The vehicle is fine as it works well with my “test” cluster.

[@jeffescortlx]

Sure it's pretty common in 03-04. I probably see 4-5 dead clusters per week.

[@92greenz34]

jeffescortlx on one of the two clusters, I discovered that the cluster started working again after I reflowed solder to the resistors to the top right of the speedo. Haven’t had a chance to try the second cluster yet, but if this info helps anyone, I’m glad to share the information!

[@jeffescortlx]

@@92greenz34 there are several spots that like to fracture. If you watch my videos you'll see a pattern of me always reflowing the same sets of components while showing the microscope view.

[@quadragin]

what are the typical bad solder joints

[@colubrinedeucecreative]

Great work! Yeah, makes so much more sense now, I saw where the pads were completely off up the traces. Using cheap resistors for donor jumper cables and then looked like transformer wire for the longer ones? I noticed on one of the longer ones they kind of overlapped, is that not going to be an issue? Or did you insulate off camera? And also I noticed you pretty much just circle the stepper motor wire, is it not important that the jumper and stepper wire touch, as long as there is solder between the two? I will use my alt accounts to give you a few more subs and not really sure where else I could send this, but I will brainstorm. Good luck! Its well deserved! Really niche, but great stuff!

[@jeffescortlx]

Yes, the copper color wire is transformer wire. It has a thin enamel coating to insulate it so it will not short if touching a conductive component. The coating burns off with the soldering iron. Its nice stuff to work with.

[@colubrinedeucecreative]

Hey, have you ever tried out a HUD as an alternative or heard of anyone doing that?

[@jeffescortlx]

I have not

[@AZStarYT]

@Chris - to answer your second question, the wire loop and solder bridge to the terminal acts as both a pad (mechanical connection) and electrical connection. It's stronger than that tiny little pad the board houses plate onto the board, as long as it's not a cold solder joint. Good, simple field repair technique (and I used to teach mil-spec soldering in the aerospace industry) but I would wind the repair wire tight around the terminal, sortof like wire wrap. Then again, this is not going out into space . . . nor would it be allowed past most Q.C. It would just be replaced with a new board/module if one was available and this would wind up in a surplus sale.

[@badcorgis]

The silver and copper color leads you use between pads and torn pads... is the silver wire solder or actual wire? Does the copper wire have a coating to keep it from shorting out other traces?

[@jeffescortlx]

Yes the silver is wire, yes the copper wire is coated.

[@IONHowTo]

Nice video, lots of work

[@majstealth]

so much space to make the pads bigger. i assume the days of tech´s looking at faulty products is 30 years over huh?

[@YTInnovativeSolution]

Very cool man. I no longer feel so alone for going the extra mile to repair things using some creativity and innovation. If I was doing that job myself, I would use the magic combination of some cyanoacrylate super glue sprinkled with baking soda to secure the stepper motors on the back side and little dabs of hot glue on the front side at the corner edge of the motor and the circuit board. I'll sign into a few other accounts I have and sub to your channel . You're not far from the target of 1,000 subscribers.

[@jeffescortlx]

Thank you its appreciated! The nice thing with hot glue is it can be removed if it needs to be. Although unlikely it will need to be because it's an X 27 that's in there

[@YTInnovativeSolution]

I noticed the X 27. With a cluster in need of extensive repairs like this one, only a fool would cheap out and not include the updated stepper motors, especially at the price for an entire stepper motor update kit. I do a few cluster repairs myself Jeff. Tell me, do you perform odometer corrections too?

[@jeffescortlx]

I do odometer correction if I run into a cluster that can't be repaired.

[@NuWavUSA]

Hey Jeff.. another great video . What type of bare copper wire do you use to make your jumpers? Part #. I do the same thing with insulated spider wire. Ty and keep up the great work and videos.

[@jeffescortlx]

The bare wire I'm using is just light bulb leads. The coated solid strand is transformer wire aka magnet wire or coil wire.

[@NuWavUSA]

Thanks I use bulb leads as we’ll

[@nodogs027]

Great video! Can this be done fore bulb connections as well?

[@jeffescortlx]

Bulb pads can be repaired as well.

[@davidwilliams7608]

Hello i enjoy your videos!! Now Mr Jeff Fix how can i get my 03 chevy tahoe cluster fixed by you? And a price thank you!!!

[@arthurrodesiler3109]

You are great at doing this kind of work. I,'ll try and help you get there

[@jeffescortlx]

Thank you!

[@wilmancalles7565]

Would you be able to fix my instrument cluster on my 04 Chevy Silverado 1500 ?

[@jeffescortlx]

Probably

[@Labyrnthdom]

What wire are you using? I actually like how it looks for the final product. The small short jumpers are the ones im asking about. I see winding wire from a old transformer for the other jumpers Watch for kitteh!

[@rickcperry]

Looks like simple LED leads from some of those cheap ebay purchases.

[@bret9741]

If a board is completely ruined. What do you do. Do you have salvaged boards that you can sell with the correct mileage etc?

[@jeffescortlx]

I do, but replacements are more expensive than repairs.

[@DrDrax-tz8xv]

can we get a parts list and details for a harness?

[@RomeenOmar]

Hi Jeff, I have got a question and i really hope that you answer it for me, My question is, how do you powered it up? Did you have an exact socket for this cluster or you just made one?

[@jeffescortlx]

Grabbed a connector from a junk yard, wiring diagram from Google and use a bench power supply.

[@RomeenOmar]

Thanks so much for replying Jeff! I have a problem with my car's cluster. All of my cluster needles are stuck in the middle, and no power gets to it. And I have checked all of the fuses that are related to my cluster and they're ok. Do you think the problem would be related to whatever you did in this video? Please answer as soon as possible, thanks so much. 🙏👍

[@jeffescortlx]

@@RomeenOmar I don't know what kind of vehicle you have?

[@RomeenOmar]

It'd a holden captiva 2007 model

[@jeffescortlx]

@@RomeenOmar I don't have those here. Never seen or worked on one.

[@MartyMitchell92660]

What is the usual cause for dim PRND32 ?

[@jeffescortlx]

Fractured solder joints. There is already multiple videos on KZbin covering this, that's why I have touched on that problem specificity.

[@MartyMitchell92660]

Thanks, I see them now. I will attempt repair.

[@jackiesgeorge]

good work i do it the same way

[@kevinhumphrey932]

What are you using to make the jumper bridge out of thank you

[@jeffescortlx]

Short runs is the left over leads from lamps, long runs coated magnet wire

[@jamesmcdaniel38340]

Jeff this is a pain to do but I will have to do it myself because of someone destroyed one again. I always watch your videos to get my head wrapped around it. I have just one question Jeff and that is the speed motor jumpers I know they are long and I see that two of them are overlapping each other. Does that not cause it to malfunction? Thanks Jeff. James

[@jeffescortlx]

I'm using enamel coated wire. It's sometimes called Magnet Wire. It has a thin insulation that makes it good for electromagnets. It burns off with the soldering iron for solder joints.

[@jamesmcdaniel38340]

And one more quick question..is that cleaner just alcohol or something else? Thanks James

[@jeffescortlx]

It's just rubbing alcohol.

[@tEqUiko]

The 🐱 CAT is the SUPERVISOR 😀1:15

[@dad004dad]

I attempted to fix my instrument cluster. I Checked out this video, and compared to this cluster mine looks pretty clean. Problem is on reinstalling the cluster there was no power to it. Checked fuse, nothing blown, but replaced it anyway. Still no power. I able to see at least around the left of the cluster and the plug looks like its plug in, (I think). Could my repair be so bad to cause the cluster to be without power?

[@jeffescortlx]

It's possible you knocked a component off the board, or dropped some solder on the board, or killed the microprocessor with ESD.

[@dad004dad]

@@jeffescortlx Thanks, don't know what with ESD means, but OK. I would send the cluster to you, but since I have been delayed by this problem for almost two weeks I decided to buy a refurbished, or used cluster. It arrives on Thursday so I hope I can install it successfully. Shouldn't be any trouble, I've installed the existing one three or four times. I viewed three videos, but somehow missed yours. If I had seen yours I would have just sent it to you. Live and learn. Thanks for the reply.

[@jeffescortlx]

@@dad004dad ESD= electro static discharge. In other words that chip is static sensitive.

[@IBECOOL44]

I have a 2002 Tahoe that I want to replace the shift indicator light with a blue one. I can't find a reference number. Is this something that you sell? Thanks.

[@jeffescortlx]

You won't find one. Nobody makes a VFD that emits blue. But you can find aftermarket faces with colored transparency film over the display.

[@69easyrider]

Great job, subscribed, good luck. I'm having problems with changing the mileage on a 2005 buick park avenue chip, the cluster doesn't appear to be like the others I've worked with, do you have any answers for my dilemma on where to begin with the replacement chip # for this 2005 Buick Park Avenue, or how to identify instrument clusters that require removal or that can be clocked / reprogrammed & what programmer if so will work.

[@jeffescortlx]

My first question is, why are you trying to change the miles?

[@69easyrider]

I have the instrument cluster out of a junk car & want to reprogram the mileage. I'm in the process of rebuilding the car, I want to have the odometer with the correct amount of miles.

[@jeffescortlx]

@@69easyrider Why not just use the original cluster, board or eeprom?

[@69easyrider]

I used to send the clusters out to digispeed to be reprogrammed, but as much as it was costing I decided to learn how to reprogram & work on them myself, after many hours of searching for information, learning basics, understanding the concepts & tools I've got some humble knowledge to where I am able to accomplish doing them without destroying them, which included many trips to the junkyards. I don't know how you got so educated in the field, I have to give you much credit for your knowledge, especially if you had to learn on your own. I've worked with cars, rebuilt & restored, them along with computers over the years & one thing I know was not many wanted to share their knowledge. So when I came across you on here & you were one of the few who were willing to share their knowledge I listened & paid attention. Back to your question, the original cluster probably can be used but I'm always trying to learn something new & want to reprogram it myself, if I mess it up I still have the original. All the GM clusters I've seen are different than the Park Avenue, this one is just another challenge for me.

[@jeffescortlx]

I see. Normally when some one comes to me with the question of "how do I roll back my odometer" I nope out of there. Because it will happen when you work on clusters. But I don't want to get involved with that. I just like to do board work and fix things, not break the law. Unfortunately I don't think your going to find much support or information on the park ave. It's just not a supported model. You could extract the bin file and look at it with a hex editor, but there wont be much information you'll be able to do much with. In the rare chances I come across a cluster like this that cant be fixed, I just swap the eerpoms.

[@fcajas4977]

Hey Jeff do you buy your bulbs and motors in bulk? If so where would you recommend ?

[@jeffescortlx]

Yes I buy my parts in bulk from a vendor in Shenzen (SZDDT). But they are not geared to selling to the public, only wholesale quantities.

[@billenvia9783]

Ok i have Chevy truck with the above year . where do i send them to.

[@Albatr0ss222]

2003 buick rendezvous - all gauges except speedo are inop. - error reads at odometer and warning lights are cycling - is this due to cluster or BCM and if it's a cluster problem can you fix it? Oh and PRND32 indicator not lit.

[@jeffescortlx]

Could be all internal cluster issues, but loss of serial data can also have similar issues. Anything else acting strange in the car?

[@Albatr0ss222]

@@jeffescortlx i cant communicate with pcm

[@jeffescortlx]

Sounds like you have a communication issue. Could be coming from any module that has a connection to the serial data wire.

[@jeffescortlx]

It goes to every thing. ABS, air bags, BCM, ECM radio, HVAC.

[@Albatr0ss222]

I found it yesterday. I wanted to inspect the ecm harness further by the air cleaner box so I pulled everything out of the way and saw 2 connectors attached to the strut tower one of them was right on top of the shift cable. I flipped it over and there it was..... a rub through and another next to it with the casing gone wire exposed. I soldered in 2 new wires and everything works now!!! One broken wire caused all that trouble!!!

[@enriquemartinez7990]

Thank you man great video I like to learn how to do this I’m with you now I’m I’ll be following you thank you👀🌿👀✨

[@fmbfla]

Awesome! But the check Engine Light is on now1 🤣

[@armorboy24]

when putting the needles back do you line them up right was 0 for example or E, i did the tape and marked it, im not sure if its me but it seems off but its probably just me

[@jeffescortlx]

No, the needles do not start at the zero marks with no power

[@stephenw5063]

@@jeffescortlx I'm guessing you cycle power to the cluster then put the needles on? Looks like when power is applied they drive to 100% then back to 0%, then are they "zeroed" out?

[@jeffescortlx]

@@stephenw5063 yes

[@MrTORREZ35]

How do i get a hold of you to repair my gm cluster? I have not touched it.

[@jeffescortlx]

My email address is listed under my channel about tab. Visible to Windows PC users. If your mobile only you can leave your email address

[@leginatoussaint4808]

What size am I supposed to be repaired what's the address

[@joshgray2024]

What are you eating cat? Lolll gotta love a professional with animal help. Damn man you are fast nice video. Detailed well. Im having issue getting needles off. Feel like someone glued them down and all of my stepper Motors were replaced all my needles and gauges worked great it just lost complete power every so often like when I would hit the high beams or tilt my wheel the gate cluster would shut off and not come back on for at least a week or two but now it's completely Don no power to anything just the lights and I can't see anything that's broken our why would be doing this. Is there a relay or something in the ignition column that would control Power to be losing when I touch the high beams or tilt my wheel cuz I brought the cluster to other people and they've tested it and said that everything is fine everything works out they put power to it it turns right on so I am at a confused point right now

[@jeffescortlx]

I'm going to take a wild guess you have a 2003-04 full size GM?

[@joshgray2024]

@@jeffescortlx 05 hahah burban

[@carlosvalencia3388]

Hey i have a quick ? How do you remove the needles on a 07 thru 14 cadillac escalade.

[@jeffescortlx]

Same way as the older ones. Break it free with a twist and continue twisting up with a pry tool.

[@chriscase6341]

What's the cost to have you do this? Was thinking about doing mine but naw

[@jeffescortlx]

My contact information is available here:kzbin.info/www/bejne/ipCViKGAgtiNl7c

[@ruthpring2459]

Hi, may i know what part number for 2007 chevy equinox cluster stepper motor please. Thanks.

[@jeffescortlx]

They don't necessarily get sold by part number. I typically just see them listed as equinox if you can find them.

[@jasonturner4265]

On the soldering of the strap resistors, what temp do you recommend using to touch them up???

[@jeffescortlx]

I typically have the iron set around 340C

[@jasonturner4265]

@@jeffescortlx thanks for the reply!!! Also thanks for the videos because I really love the way you made the fixes on my 2003 Chevy tahoe, affordable and comprehensive by way on the point on content in the illustrations you give and ESPECIALLY the tips on the do's and don'ts!!!! I like to think I am a hobbiest with dealing with electronics!!!!

[@jeffescortlx]

@@jasonturner4265 glad to help

[@josueharo8469]

Great job!!!

[@jeffescortlx]

Thanks!

[@rangertexas]

Anyone have an idea right above the speedo motor what the number is on those small red either resistor or diode not sure what that one is

[@jeffescortlx]

The red/glass components is diodes.

[@NuWavUSA]

Hey Jeff I have an 04 H2 bd. It has no Odometer readout . Upon inspection I noticed a 66 ohm resistor on the secondary side of 10 pin transformer that drives the Odometer digital display is burnt up . On the primary side of transformer a small mosfet shorted out . Replaced them both. When 10 pin transform is in circuit , the small fet runs super hot and will burn up if kept on too long . Replaced the transformer and round 4 leg coil above it . Same thing . Any thoughts ? Ty sir -Mark

[@jeffescortlx]

I believe that transformer runs both the high voltage (42v) for the VFD driver chip, and low voltage high current for the VFD hot wire. Try manually injecting 42 to the cap in the bottom left corner, see if the driver chip get hot.

[@NuWavUSA]

I’ll try it .. thanks

[@NuWavUSA]

Hi Jeff I haven’t had a chance to inject the 40vdc into that cap to see if it restores the display without running hot . I put it all back together. But if it does what would you think the fix would be ? Ty sir

[@jeffescortlx]

It depends what component gets hot. That's your short.

[@NuWavUSA]

10-4 ... I’ll give it a shot ... ty for your help

[@ccolletti39]

I was just wondering I pulled out my cluster panel and resolder the computer chip because my gear select was real dim I fixed that now I can see it again but in the process when I removed the needles I didn't mark the positions and when putting back together I felt dumb because I am not sure how to collaborate the temperature gauge and the oil pressure gauge is there an easy way to do this

[@jeffescortlx]

Not really a easy way without the ability to do it on the beach. You'll just have to pull and reseat the needles where you think it should be. Or send it out.

[@ccolletti39]

@@jeffescortlx okay thank you very much I used a Diagnostics scanner and tried to match it up as close as I could

[@connallykendrick9350]

I've got a slightly bad self-repair issue from a couple years ago... 😅 Could I email you?

[@jeffescortlx]

Sure kzbin.info/www/bejne/ipCViKGAgtiNl7c

[@crewcab40]

How much do you charge for an 05 gmc tachometer repair does not work any more.And how do I get in touch with you other than KZbin.

[@jeffescortlx]

Full rebuilds are $120 plus shipping. You can leave your email address or find mine under my channel about tab.

[@beekeeper8474]

What do you use for LEDs?

[@jeffescortlx]

5mm 12v diffused flat top.

[@MrTwins3950]

Can you advise if u can take mine in?

[@jeffescortlx]

Yes. Contact information is available by following the link in the top comment.

[@chrispopiel1162]

Is the Tech 2 you are using a genuine GM Tech 2 or a clone? Can you recommend the best place to buy one?

[@rogerbrandt6678]

Don’t get a gm tech 2, buy a Autel or similar and get every option plus, it’ll be a 1/7th the cost.

[@heartslessons6243]

Hi Jeff I have sent you a message before. Well I have other one. How much do you charge to repair one. Tina

[@jeffescortlx]

Well I don't know what kind of vehicle you have. But 03-06 full size GM cluster rebuilds are $120 plus return shipping.

[@dannyarcos4433]

Where can I find you I need my speedometer fix everything pls comment back I need it really bad I been having troubles

[@jeffescortlx]

If you look at the top comment, it has the link to contact me.

[@octavio136]

How much is it to upgrade to LED and do milleage correction on a 2008 chevy trailblazer ss cluster ?

[@jeffescortlx]

LED's and no extra charge with full rebuilds. Rebuilds are 120. Mileage correction would add 40.

[@octavio136]

jeffescortlx. Ok wat if the cluster i bought works fine just need the LED upgrade and mileage corection how much for that ?

[@jeffescortlx]

It already has upgraded x27 stepper motors?

[@octavio136]

jeffescortlx dont think so its stock

[@jeffescortlx]

I had to stop doing partial repairs. I ran into too many problems. People would say "my cluster works great, just need this one little thing done", so I would quote accordingly. Than once I get my hands on it it turns out the stepper can't even pass a full sweep test. But the problem is 6 months down the road problems start showing up and it becomes my fault because I was the last person to touch it. So now when I'm in clusters I replace everything.

[@TheLazyCarrot]

I am just here for the cat 🐈

[@gregoryfrost960]

How can I have you repair mine and how much? 2004 Trailblazer. Thanks

[@jeffescortlx]

Full rebuilds run $120 plus return shipping. Send me your email if you want the shipping details.

[@gregoryfrost960]

jeffescortlx email is [e-mail] Thanks

[@maconpowell4865]

how much would it be for a 2008 equinox

[@jeffescortlx]

What's wrong with it?

[@martinberlanga4914]

My driver information center is really dim what could be the problem

[@jeffescortlx]

Depends, what year is it? 2005?

[@martinberlanga4914]

@@jeffescortlx yes it is 05 z71

[@jeffescortlx]

You'll need a new VFD display.

[@martinberlanga4914]

@@jeffescortlx ok thanks!

[@martinberlanga4914]

@@jeffescortlx would I be able to use one from the junkyard

[@trishmdavis]

do you have a shop that you can repair one for me?

[@jeffescortlx]

Email reply sent. No, I don't have a shop. Would be too much overhead for a part time hobby.

[@blankskate19]

Jeffescortlx do you have an email i can contact you at about pricing on fixing my instrument cluster?

[@jeffescortlx]

I just added my email address to my channel "about" tab. I can't send you a private message because your channel isn't fully setup, but you can send me one.

[@wilmancalles7565]

@@jeffescortlx I would like to use your services if possible My email is [e-mail]

[@jeffescortlx]

@@wilmancalles7565 my contact information is available by following the top comment link that says follow this link for my contact information.

[@jeffreymurdock8366]

I know what you mean about KZbin. They got my channel like that and then came back and made it so I couldn't do live streams using my phone because I didn't have 1000 or more subscribers. They arent aware that if i really wanted to i could easily create over 1000 email addresses in my spare time and then use those to subscribe to my channel. Would take time but when you're kinda disabled you have lots of time.

[@virgilrule8491]

How much do you charge

[@jeffescortlx]

Depends, what do you have that needs to be repaired?

[@silveriourieta7780]

I have 240 sx cluster does not work

[@jeffescortlx]

Sorry I'm not familiar with that one.

[@heartslessons6243]

Where are you located at?

[@jeffescortlx]

Minnesota

[@heartslessons6243]

I'm in Michigan the upper peninsula just south of Houghton.

[@heartslessons6243]

I have a 2003 Envoy

[@jeffescortlx]

Ok.

[@jacobnbr11]

Great job. Someone destroyed them pads. My work got 10000 times better with a hakko 951. An iron is not an iron.

[@jeffescortlx]

What did you use before the 951?

[@unitedresistancemovement4899]

Sub'd. Great channel.

[@jeffescortlx]

Thanks!

[@georgecampos7119]

Kitty wants to help

[@gregandry7415]

I have a 04 suburban that started out with gauges not working then working, same with the lights in the cluster on and off. Everything has stopped working, lights and gauges. I have attempted twice to fix came close the first time but I had to go back the second time for a light not working, now im back to nothing working. If your willing to take this on please email me at [e-mail] Thank you

[@frankreyna6095]

Can you send me address or to send you my 09 2500 Silverado cluster?

[@jeffescortlx]

What's wrong with it?

[@brianhigginbotham4489]

Hello just wanted to thank you for all your excellent videos ! I just got a used 04 Tahoe & all gauges seem to work fine with one exception, the cluster reads “service brake booster” as the Tahoe has hydro boost brakes this doesn’t really apply. I’m sure somewhere in the vehicles life the cluster has been changed with the donor being a vacuum booster equipped vehicle. Can this be repaired/programmed properly? I also would like to see about it being gone thru & all checked out if possible. If you would please send me a message at [e-mail] Thank you !!

[@jeffescortlx]

I'm sorry but I'm not able to program the brake booster function. Yes it does sound like someone put the wrong cluster in your Tahoe. This would also mean your odometer reading would probably be incorrect to.