Repairing a Makita DSP600 Plunge Saw that is stiff and sticking.

[@dylanwright9876]

Waited 2 years for this, Makita got stuck, bought a dewalt, pulled the makita back out from back of garage, did as you said, makita fixed, thank you sir👍

[@EndoliteM4trix]

Not for the faint of heart - throws Screws everywhere and still finishes in less than 20 minutes. Legend.

[@woshinwb]

Its edited and you risk breaking the housing without the exact suppport on the back of the press. Also you need a press to get it out. Not easy

[@EndoliteM4trix]

@@woshinwb what a profoundly useless comment. Who knew videos on the internet were edited? I also didn’t say anything about the press. Reevaluate yourself my friend.

[@MrNfury8]

Nice work yet again. Your approach to repair is admirable. The amount of people that are going to attempt what you make look easy is garn leave a lot of tools in pieces for a long time. With the owners saying. "Dean made it look easy." (Not this one...) That is pure skill, thanks for sharing your insights and brilliant attitude 🇦🇺🤠👌

[@miguecortes4355]

Hello Dean Doerthy, greetings from Buenos Aires, Argentina, I wanted you to know that I love your videos, they are very good and I also learn a lot since I think that, just like you, I love power tools. greetings and blessings !!

[@liftrucs]

Nicely done Dean

[@benjaminhunt283]

I know so many people with this problem. Does not happen to Orher saws, Festool, Mafell, Milwaukee. This should be a product recall. Ridiculous that this type of saw should do this.

[@markmockridge5816]

Hi great video what do you use to clean inside the pin housing many thanks

[@jasonhughes6994]

If u took the screw out at tge pin and just ran wd 40 threw it, would it not be easier and than ut some ptfe grease in would that work.

[@riba2233]

Yep, clean your tools after use, won't make you less manly...

[@edwardlogan267]

2:30 I think I heard that screw hit the side of my house in NZ!

[@jimmoore8943]

What was the make of that knife/ scraper I see in one of your videos thanks jim

[@deandohertygreaser]

That is the toughbuilt utility scraper. very useful knive for me.

[@jimmoore8943]

@@deandohertygreaser got the scraper at tool station great bit of kit thanks

[@petercath]

Hey Dean, If you haven’t got a press what’s the diy version of getting the pin out at home?

[@petercath]

@dean Hey Dean, If you haven’t got a press what’s the diy version of getting the pin out at home?

[@deandohertygreaser]

A second set of hands to hold the saw steady. Balance it in a metal tube over the pin housing. And use a blow torch, punch and hammer to beat it out. Or if you have a big enough vice you could use the vice as a press

[@ashleybignell2366]

Had this same problem on the sp6000 after 18 months. once the pin was changed it hasn't let me down in over 5 years. & that tool gets proper abused.

[@woodandtools46]

l'usage de l'aspirateur prolonge la durée de vie des machines

[@ErikWarner-p9o]

What the hell did he say. Speak English Man