Repairing Cracked Rear Axle | How to Repair Cracked Truck Differential Informative Video

[@EastCoastScott]

This channel is pushing out an amazing number of videos over the last 2 weeks!! Amazing, keep up the good work. I wish I could understand these guys because they have some laughs on times!!😂😂👍 thanks for keeping the music out of the videos too, much more enjoyable to watch especially hearing all the sounds.

[@piperdoug428]

I owe you an apology bud, doesn't matter if i think some of the workers are being unsafe or doing sub-par work, you do an excellent job of producing videos of working life in Pakistan and as a fellow KZbinr i understand all the hard work you put into creating this channel, so i will make sure to like ALL your videos, i'm already subbed and i already have the bell notifications on. Thanks for your videos.

[@PedroRamirez-yw2gm]

Safety first my brothers.i like watching you guys working but you need to protect yourself from the hazard.please

[@paulkruger3070]

I love these guys, love watching their videos, wish i had them around my workshop.

[@Riker-eq2yv]

Videos like this show that there’s hard working honest people from all over the world that unite us all.

[@wonderingskills1]

thanks for compliment

[@0dbm]

These guys are the best

[@isaaccharles1189]

Great video Pakistan truck if these guys were in the us I would hire them right away

[@Pstash89]

Talk about improvising!!! 💪💪💪 This probably cost less than $50 USD. Wish i could find a mechanic like that here.😒

[@thomasmosqueda4337]

I wonder if the Snap on truck ever visits their shop...

[@jumpinjojo]

Only Matco.

[@bootchop88]

I think the snap on man dislikes these videos.

[@KamranHaider]

Skill and hard work, good job my Pakistani brothers 🥰🙏

[@wonderingskills1]

Thanks Bro

[@billreyna1355]

No junk yards because everything gets fixed one way or another. Anything tossed, must be worthless. Good work.

[@manusudha4269]

Excellent work by some real talented mechanics. Pakistan would be among the few countries to lead the way towards recycling as this planet is running short of resources. Kindly forward my regards to the cameraman who does excellent videography

[@1962pjb]

These guy's are master's of the heat and beat, but I have to wear my PPE just to watch them work! 😬😂

[@scarface-39]

I know!!! I’m not the safest guy in the world when I’m working but striking to hammerheads together and not even using safety squints is pretty dangerous to me!!😂👍🇺🇸

[@1962pjb]

@@scarface-39 Also the striking surfaces on the punches and hammer faces have mushrooms on them that look like a nuclear explosion waiting to break off. 🔨🎆🌋💥

[@scarface-39]

@@1962pjb you have a way with words my friend😂😂👍🇺🇸

[@ninegeorge]

What does hammering do after you weld?

[@billyjack8119]

@@ninegeorge knocking off the slag

[@jorgedomingo1735]

Best solutions men, not problems men. Amazing.

[@WBT714]

Do the owners of the trucks realize that overloading will cause damage, hidden damage, down time and loss of revenue? Anyway, good job 👍👌

[@quintincairncross1088]

You guys are totally amazing

[@scarface-39]

I like watching people repair what’s broken with what they have!!!👍🇺🇸

[@theonlybuzz1969]

And somehow it always involves the use of a hammer, funny how the saying goes “if it doesn’t fit then you have to hit harder” or get a bigger hammer “. Glad to help.

[@1natedoggy]

At the end of the day they get in line and someone checks them out to make sure they still have all their toes, fingers, & eyes intact.

[@rodrigomolina5475]

Es un exelente trabajo amigos saludos de Torreón coahuila mexico 👍🏾👍🏾

[@barrycox8468]

It would be illegal to work that way in the uk

[@scottk0623]

Hats off to these people, no sitting around waiting for some free government hand out. Hard workers

[@piperdoug428]

Yeah allot of western society could learn from these folks eh

[@GAMETV-sb2ro]

Good work 🇩🇪

[@claudiomoreto4562]

OS PAQUISTANÊS SÃO ÓTIMOS MECÂNICOS SEM FRESCURA DE BANCADAS !!!!👏👏👏👏👏

[@aidober104]

may be i seen it differantly but its not good for bearings to have current pass through them like the earth should be near where u weld good work men

[@ibidu1]

Perfectly fine for bearing or seals for electricity to pass. Actually 12v or 24v in this cases passes all the time through the cars electrical system. Through ground wire, anything metal in your car is grounded negative

[@aidober104]

@@ibidu1 thanks for ur reply and stand corrected ye do great work and turn out amasing videos keep them coming thumbs up

[@alexjohnward]

@@ibidu1 actually the high voltage arcs across the rollers in the bearings causing premature failure. Don't earth through bearings.

[@ghong85]

I was really impressed with the enthusiasm and abilities of the mechanics in Pakistan.Materials that can be counted as scrap metal can be repaired and reused. Presumably, there are no stores that sell second hand/halfcut spare parts in Pakistan?

[@trucktractor8527]

VERY NICE WORK BRO

[@bhelsiva]

Big Salute to Hardworking - From Indian Hindu brother.🙏👍🎉💐

[@danielcalderon4439]

Con pocas herramientas hacen un buen trabajo felicitaciones amigos

[@georgegonzalez2442]

So if inch-thick cast iron broke, you can fix it by tack-welding on 1/4 inch thick mild steel? Good to know.

[@jamesconway337]

I think if Amazon cared about safety they would donate these people some shoes and work gloves and I goggles.

[@mozacava]

👏🏻👏🏻👏🏻👏🏻👏🏻

[@felipehernandez7331]

Con muy poca herramienta son fantásticos estos hombres

[@Faizywaizy]

Thanks

[@muvinarasumuvinarasu1455]

World class mechanic

[@millycarrington]

Couldn't believe it when he started welding inside the casing while full of oil and then cleaned it out afterwards! Why not clean it first and have a better chance of getting a good weld and also saving a couple of years of your life from less fumes and reduce the chances of a fire?!

[@ibidu1]

Ya that was pretty gnarly of him to weld through diff oil. But as for a good weld, it should hold up fine because hes welding on a AC buzz box welder. When you run AC the rods self clean the metal. Its industrial welding! You can weld through paint and even rust and still get decent welds. Thats why farmers like to use them versus welding DC polarity where you must clean the weld or it will crap out on you.

[@jordanzurbruegg73]

I wonder. How many leaf springs is to many leaf springs??? Lol

[@sultanbazatth93]

never and never do welding on a oilly surface

[@aleckaleck2492]

Сварка кривым электродом решает.

[@reynaldotorres8860]

they are talented people Pakistani

[@divacleopatra]

The content of your channel is amazing, but the "subscribe bells" are very noisy... 😅

[@wonderingskills1]

I will work on this

[@oldschool823]

@@wonderingskills1 if you're going to put that annoying Bell. I'm not going to watch your videos.

[@Boyke_72]

How many tons this truck load 👍🏻👍🏻👍🏻

[@sergeychemeris9311]

Молодцы, ещё если тонаж поменьше грузить

[@野々上昌利-r7y]

Ну да! Им ещё б раза в два как у БЕЛАЗА во тогда ништяг!

[@rishiemansingh2276]

Very unsafe procedure. Welding in that confined area with the presence of all that oil. Please guys practice more safty. Wear your safty glasses and Boots. I love looking at your videos .

[@antonryabkov1611]

Объясните им что такое молоток

[@jatinderryait5602]

Yes

[@imchris5000]

well thats one way to ground a welder

[@matthewtaylor3308]

I wonder if they have ever heard of “surface prep.”

[@germanfernandez9033]

🤤👌👌👍👍👏👏😎

[@saeidkharrat4397]

IS PRETTY AMAZING THAT MECHANIC IN PAKISTAN REPAIR TRUCKS WITHOUT PROPER TOOLS AND SUPPLIES.

[@Muffinshaker]

What? They have everything to get the job done. At the end of the day ... they are just as fulfilled as any mechanic/fabricator/technician here, regardless of pay. And they’ll be back tomorrow.

[@TUNG.13]

👍👍👍👍

[@kiritvara257]

No need to do all that work. Good welder can repair that over head weld.

[@nguyenhuynh9806]

Good job guy

[@jamesconway337]

So many of these videos are characterized by people working on the ground barefoot. Why not construct a basic bench.

[@gokhanknal1002]

Türkiye den selamün aleyküm pakistan

[@wonderingskills1]

Waalaikumussalam

[@saidram1371]

عمل جيد

[@reynaldotorres8860]

it was very dangerous work

[@cesarhidalgo5486]

La mecánica no tiene fin !! Cada quien se adapta a sus necesidades

[@grigoriykirpich2790]

На хрен было мост откручивать,если и так можно было заварить.

[@Mr.-Prezident]

А изнутри как варить ?

[@tommlinger3234]

Pimp my Trash!

[@1natedoggy]

No Safety Shoes. No Safety Glasses, No Gloves, Loose Clothing. Then working under a Hugh Truck jacked up in an unsafe way. No wonder their life expectancy is so low.

[@lucasfalcao1669]

🇧🇷🇧🇷🇧🇷🇧🇷

[@Faizywaizy]

Thanks

[@saidram1371]

يجب عليكم ان تفرقوا بين resore و l axilaire لكي لا ينكسر bolon semblage

[@jatinderryait5602]

Jnaab Agar diff ko strip welding karne se pehle fit kar lete to baad me diff ko hammer 🔨 maar maar ke na baithana padta

[@sshyshy6097]

Invest in more tools

[@jumpinjojo]

Dat vill be $4.97.

[@flicks1972]

they dont give a shit about their environment - spilling engineoil all over the place.

[@RickOshay...]

Sorry... But that will never fly...

[@generalmassive1907]

Is there nothing these chaps carnt fix with a stick welder 😆

[@jamesconway337]

The Republican overlords must not care about their safety. Despite being hard workers they are put at peril at their own expense

[@Evil-Jesus]

Shoemakers

[@arpithprakash2940]

Irritating bell sound more than 10 times. Hence, unsubscribed to your channel 😡

[@hdsongs2817]

Whatsap nbr do bhi

[@wonderingskills1]

Aap kidhar sy hain? jo pochna hai idhar poch len g