Repairing Rotten Fascia On A House | THE HANDYMAN

[@1nicoleblack]

I am absolutely ADDICTED to your videos... You have some serious skills my friend!

[@TheHandyman1]

Thanks, Comments like this encourage me to keep making them.

[@sandyauger4662]

I just want to say THANK YOU !! Im a ex n.a.s.a. employee and now im a general contractor / handyman . Your videos have been very helpful !! KA

[@asphaltdancer61]

How about some verbal explanation of what you are doing, and why, for those of us who are beginners? That's what I was looking for.

[@PapaSmurfx93]

Oh well, maybe another video

[@thirdeyevideoshd3866]

It literally says what hes doing on the video repairing rotten fascia boards . Stupidd

[@liljohnson3413]

Bruh it’s very self explanatory, your just a noob , before KZbin you just had to figure it out, it’s the life of a contractor

[@willd0g]

Granted if you’re blind… but otherwise if you aren’t then use your eyes 👀. Which part exactly do you want an explanation on? 1. Measure old material 2. Remove old material 3. Cut to size replacement material 4. Paint said material 5. Then in addition to what was previously there, add (metal) flashing on the corner to prevent future rot from water come down off that roof edge. Look i don’t know how to do it either but now that i’ve seen it done, we can conceptualise this into a recipe for similar repairs in the future. Can’t expect everything to be handed to you on a silver platter.

[@oby-1607]

If you replace something, especially something that has rotted from water damage, you have to rectify the cause or you have done nothing. What I could see was no overhang of the shingles and improper drip edge install with no spacing behind the drip edge. Like you said the customer was what dictated the work to be done.

[@bryanhickman7663]

I use PVC board if I want it to last and can't be 100% corrective of the cause. If white on white like this job, no painting and will last for a very, very long time. Stuff I did on my garage >15 years ago still looks good.

[@willypittner7139]

Redid our whole house facia boards with fiber cement boards. Now no wood rot can set in. Had to repair some of the wood behind as this was also rotten. Sadly we don't get proper nature wood in SA most of the pine warps like crazy. If you want decent wood for repair it costs an arm and a leg

[@telanasteward]

What an awesome idea !

[@highqualityhomemaintenance7565]

All in all, that's nice work. One thing you may want to look into is the step flashing that should have been installed right above your repair. I believe that is the cause of the rot.

[@Megatron995]

@@patrickcowan8701 "Repaired" - $20. Done right - $200+. A customer has to be old enough to see the value, and well-off enough to afford it, to pay for the second option.

[@dantosinferne]

I gotta do something similar to a shed. It's in rough shape and I've never done this before so I'm researching. Thank you for uploading!

[@MattsShop]

Nice mobile workshop in your trailer. Impressive!

[@TheHandyman1]

thanks

[@MattsShop]

Anytime! It's good to have a mobile shop like that and not just a bunch of tools scattered around the truck/tool box. I'm sure it increases productivity a lot.

[@boonofdoom7384]

I watch a lot of Home Improvement videos, you have some of the best. Please keep making them. I don't think I've ever asked anyone to keep doing what they do, but you deserve to be the first.

[@jswnv7775]

The scab on the end of the soffit is proud of the fascia. What's to keep water from behind the metal band-aid you installed? You left the rotten soffit end in place?

[@gixerags750]

Quality work and organization...nice mini circular saw!! Peace

[@elvisleon9394]

Great Job !!!! Congratulations my friend !!!

[@Scottspeed12345]

Love your videos. I, too work in this "trade". I have learned some tricks from you, and I appreciate you for that.

[@koskey06]

Those pry bars "mine is a little diff shape" are one of my favorite tools. They make demo much easier. Can do the job of a 10lb crowbar with less damage to other things.

[@starvideoimages1]

Can you please tell me what’s the brand name of the tool vest you have on?

[@meganpickles7981]

Maybe answer my question please ? I have a small room we added years ago, the top over hang on outside on one corner is rotted, do I have to replace the roof wood corner or can I just paint it an replace a roof shingle , I need to know the rot will not travel if I cover an paint it ?

[@futbol1972]

Had concrete around garage in old house Guy took it off old concrete. He said I need to replace rotten vinyl around based of garage before pouring new concrete. Do I just use a 2" nail gun to nail the new vinyl or do I use nails?? He also said I need to water proof it with outside paint or something.

[@miscstuff4789]

Most of what you showed was the stuff a DIY person would already know. How did you attach the rafter? How did you attach the sheet metal corner? Where was the water coming from in the first place?

[@thedude5295]

Yeah. This video was less "How To" and more about self fellating. I'd rather watch this guy do it than Ron Jeremy, I suppose. Guess that's why I'm not watching Porn Hub right now.

[@jwayne777]

You didn't show how the wood was installed. It was magically installed.

[@Carpenters_Canvas]

Saul Souza it’s magic , you didn’t know that ? Lol I’m amazed at some of these instructional vids . I’m a fairly skilled carpenter , I’m going to start posting vids soon , I’m just scared of those people out there who think they know everything and just talk all kinds of shit

[@1dgrdgr]

@savage 069 didya see the sheet metal cap her installed?

[@raulgutierrez5920]

🤔🙏😁!!

[@Casca-su3ty]

@I Know Better thats not what you get pay to do ! Is not rocket science dude. You fix was rotten period who cares why or how it happend

[@kendalgee5808]

@@Carpenters_Canvas Like the way John Wayne talks mad shiet. lol

[@anthonyvincent9990]

wife wanted new porch rails so when i removed them one of the post fell out of the roof. All of the inside for the roof is rotten inside the alluminum trim. can i replace the wood with out removing the vynal soffet?

[@vinylsoup]

I like that vest dealeo , also the use of metal where applicable

[@lakermark2006]

great video, but the repair didn't match the one in the thumbnail.

[@Shalmaneser1]

I have an out-building where they left the rafter tails exposed. What should I put up to support gutters? I'm not having any luck finding gutter videos that don't use finished buildings.

[@navysailor1980]

When I had my fascia removed and replaced with new wood I made sure I bought some metal and had it formed or bent to place it over the wood so it would wrap around. I put paper underneath it and tucked it under the edge guard or flashing. Hopefully I will never have another wood rot problem, I hope it was worth the investment. Paint only goes so far, eventually it will penetrate and soak in the wood. I hate the idea of having so much wood on the outside of the home.

[@Marcomuniz3]

I'm getting into handyman business but I don't know what to charge for something small like that. How much did u charge for that small job? Thanks

[@3dB123]

Im having trouble deciding wether or not to get new fashia boards, house was built 72 and I’m thinking they are the originals. Physically they look goodX, the paint is coming off and you can see the wood underneath which is gray. What should I do?

[@UTube_userRM]

It would be very useful if you could tell exactly how long the job took plus the approximate material cost. You mention it somewhere in the comments, but that is very useful to include either in the description or in the video itself. Thanks a lot.

[@bassplayermarty6032]

I would’ve like to see you were you screwed the new piece of wood to the existing dry rotted stuff and how it attached rather than watching you paint a piece of wood.

[@TheHandyman1]

There wasn't dry rot. I nailed the new soffit and fasica to the framing that was there.

[@bassplayermarty6032]

thats what I mean...wanted to see how and where you attached the new piece too...

[@globelie6444]

@@bassplayermarty6032 nail it to the tail of the rafter .

[@josbinyoface6276]

@@bassplayermarty6032 I understand exactly what u meant. 🤔 Making a how to video, Would’ve been great to show the whole how to.🤷🏽‍♂️

[@rockscrambler6700]

Good man! You painted the entire board before installing.

[@BrianBeck]

looking great, make sure that you have a drip loop on the coax line =)

[@flareplayerico]

Brillant skills. Cheers.

[@carlosaraiza2599]

Nice repair on that facia partner. Hopefully you get the other gig and we'll get to see that job also. That sprayer could've come in handy last week when I refinished a customer's sun-beaten front door. Keep the videos coming partner, especially this weekend so I can pass the time while the approaching hurricane passes thru South Texas. I won't be firing up the BBQ pit this weekend....

[@TheHandyman1]

I just saw that Harvey is going to hit Texas pretty good.

[@TheHandyman1]

This sprayer even sprays latex pant. I filmed a video just on the sprayer. I can't believe it only cost $107.

[@HaliHunters]

Sorry if I missed it. What paint sprayer is this? Don't see a video. Is there a link?

[@downunderdank6894]

Good work brother, your a machine !!

[@rayortiz3228]

Nice job guy 👍😃

[@rcl9922]

How much would this specific job cost?

[@unwelcomemotivation]

JEEEEEEEZE, the handyman? I know it was a simple job, but with those skills you should be calls the craftsman.

[@amazingvideosjilo9509]

You are amazing, I like your creativity, nice done.

[@gourishankarsubramanian9677]

You are too good man. Absolutely professional..

[@delikat83]

Hey who's this young handsome handyman. Throwback video. What's up handyman. What's your take on liquid wood 2 part epoxy. Have you ever used abetron wood epox?epoxy? Hello from Richard's Painting Service Inc BTW.

[@Nyck461]

To what is your soffit attached ? Is it hanging? I did not see you installing your soffit to the fascia.

[@veronicatatum1408]

Your video was amazing!! I would love to hire you to work on my home. I'm sure you're not in my area but if you were you would definitely be hired100% Thank you for sharing your skills and talent because you have made a senior citizen feel as though she too could attempt this job. So Kudos to you and keep sharing your amazing talent.

[@jeffa847]

Do you use water based Kilz or oil based?

[@Xlightsonmain]

no pvc?

[@crand20033]

How did you get the metal piece to stick onto the corner?

[@classicalconcerto6742]

I have a piece of rotten wood at my roof that is in a very similar situation. Will fix it next. Put a piece of sheet metal to protect the wood from water is a very good idea that I am going to do as well. Thank you!

[@MegaSalmart]

You didn't show how to replace the wood .

[@patsyswann8530]

We need to do some repairs badly! But we have no help and we are senior ladies. I wonder if there is anything that will replace a ladder to bring us up high enough to try to paint our home? With safety! I’m Sorry. Might sound a bit ignorant but it’s because I am when it comes to repairs on a home. Thank you!

[@prreed34]

question why did you put flashing on the 90 of the facia board? never seen that done before...great videos

[@TheHandyman1]

+prreed34 weatherproof

[@riclmena9395]

Nice vest does he carry the kitchen sink

[@davfinport]

I have the Hitachi 6 1/2 circ saw, best handyman tool i think i have. 1 4Amp lithium battery will knock out most projects, including the remaining 20-25 feet of a 7 foot privacy fence. Lithium is hands down the only way to go, for distance.

[@TheHandyman1]

+David FP I have all new lithium 20 volt dewalt. I traded in my old back up 18 volt for them. Can't bring myself to use them full time yet. They are keped in the workshop. Im sure ill bring them to work some day.

[@davfinport]

All I hear is to keep the batteries out of the heat. I think you will like for sure. Knock off batteries on ebay have been good to me too, just have to find the right seller from China. Less than half the price of name brand.

[@cinnamongmc5430]

This lady bought Kobalt lithium sander, could not sand 2ea 3-1/2ft 2 x 4s, it sux. Also lithium B&D weedeater, couldn't finish 50ft of curb edging, it sux too. No more lithium batteries for me.

[@Aaron-yz6yl]

Amazing job👍👍👍👍😊😊😊

[@quentinsherratt7969]

Good job, looking forward to that big one! Good luck👍

[@alexcordero6672]

I don't get it. What did you attach the wood board to if the whole thing was rotten? I have to do this to my house but I can't figure out what to attach (or how) a good board to. You handle those tools with mastery, nice demo. I have to clear my kids, wife, and dog out of the garage and call the city (jk) when I use power tools.

[@oaklndr8rz]

You're channel is now my favorite on KZbin . I was wondering how you've learned to do so much work. When you first started out did you ever have to teach yourself something ASAP for a job you has to do? Thanks for the great videos!

[@yvonne.stewart2745]

What type of wood is used?

[@23Plumbum]

You make it look so easy . Great job !.

[@colmacproperties1540]

I like the safety glasses (just squint)

[@Brightly747]

What type of wood to use on those fascia boards?

[@PROJECT_936_dot_NET]

Sterling delivery You have inspired me to work on my channel, thanks. 🐼

[@gixerags750]

What Brand is that Paint spray gun pleaee? Cheers

[@chuckstarwar7890]

what saw are you using? small and powerful?

[@CurlyQLink]

Safety glasses my friend. Take it from someone who injured an eye.

[@TheHandyman1]

Safety 3rd.

[@roadrunner1944]

Always enjoy watching your informative videos. Good, positive attitude.

[@aeridyne]

Did you caulk behind that metal you put up? It doesn't go behind anything to prevent water from getting behind it?

[@TheHandyman1]

It goes up under the drip edge

[@kudos2ya37]

can you come to iowa to do my facia before winter..? please please please i can't find anyone who can do it or who isn't bizy doing stuff..

[@Proteanlife]

U are truly making a difference man. Keep it up and thanks

[@PhrontDoor]

It's been a while.. have they decided to replace or consider fixing the remaining external issues?

[@israelnemitz8323]

Nice work.

[@scottypitts5598]

What causes this to rot? Is it just time and weather exposure? i have a spot and im afraid if i dont find the leak it wont do any good for me to replace it. Whats is the best way to find a leak? The panels inside my house have water damage i replaced them 2 yrs ago when i moved in because it was rottten. Oh yeah did i mention all of this is around the fireplace? i had someone tar around the base of it and it seems to still leak. I dont use it should i cap the top? Thanks fo this i think i am confident in starting this project after watching this video

[@Megatron995]

That's the flashing around the chimney that does that. It can take a few tries to get a contractor who does it right. Try a licensed roofer, if you can get one who'll take little jobs. I'm bothering to respond 8 months later because a chimney-to-roof leak is a problem that tends to recur. Also, don't cap the top for a leak. That only stops rain from coming into the fireplace - it'll do nothing to seal the chimney to the shingles, which is what needs to be done.

[@donnieporter7890]

oh and n that 20 yrs n business not once have i ever charged the customer more money when unseen things come up while doin the job sometimes i make them buy material but i do the repairs at no xtra charge and i think this is why ive never had to advertise its all referrals and call backs

[@viper22304]

Does anyone know why he use a piece of metal on the edge when originally there was none? thanks

[@CGoffgrid]

I think he's trying to keep water out of the wood end grain, but not sure.

[@luisp1174]

Cool video and some of the fastest work I've ever seen. The $300.00 an hour you change is fare because you did that in like 15 min, so you would like change $75.00 bucks for that, what a deal. The guy that charges $100 an hour and takes 2 hours would be a rip-off hahaha

[@riclmena9395]

Something wrong with that guy he must be Trippin doesn't really speak much

[@dantosinferne]

Fantastic! Thank you!

[@isaacalvarez534]

why you put that metal on the corner of the two pieces of boards? it must be to prevent rot but is it necessary?

[@debrajabs9523]

Was that a special saw that let you make the little cut out in the corner of the wood or can I do that with my Ryobi too.

[@1dgrdgr]

He fast forwarded through setting the depth. Make a number of cuts at the depth you want the notch and then bang the leftovers out with your hammer.

[@TheElectriciansToolChannel]

How big of an electrical job do you take or refuse ? If I hire you will you pull the permit ? Thank you sir, I will be waiting on your reply.

[@TheHandyman1]

Depends on how much it pays. I can pull all permits.

[@HOTSTUFF10]

How much do you charge to do 200 Linear feet of raptor tails and patient that has dry rot and termite damage

[@patrickmclaughlin6013]

I missed it. Did the new board just get nailed over the old one? Did the old board get cut out and the new board toe nailed in? That extra "paint everything" is a nice touch.

[@TheHandyman1]

I cut out the old one

[@fredhammer6413]

Nice tool vest buddy. Har-de-har-har.

[@potaylo]

what paint are you using. Please forgive me if that information is available somewhere already.

[@KingMarioRF]

Bro your trailer set up is sick!!! I want something like that man putting everything in the back of my yukon not kool anymore

[@bryanhickman7663]

Consideration of using PVC boards. No painting, no metal, will never rot again?

[@robertovelasco6320]

Hi, how much do I charge to replace facia on a house? By foot or time and how much could be?

[@dumptydo]

Isnt the wood you joined it to still rotten???

[@boomertsm]

How did you secure the galvanized sheet metal to the fascia? Glue? Nails?

[@HULK-HOGAN1]

Looked like glue. I’d use screws

[@mikemota2002]

why use this and not use pressure treated wood? and caulk or use ready patch to help seal joint and gaps for weathering?

[@Stumpman61]

Great job 👍🏻🇺🇸what state are you in ?

[@Eljefe693]

Must be nice to be sponsored by Dewalt.!😀

[@TheHandyman1]

Maybe some day that will be true.

[@jerseydevil3799]

Would’ve like to have seen start to finish. Either way nicely done

[@marshallhepner6087]

I'm Interested in starting my own handyman service. I do building maintenance now. You got any advice for starting up?

[@TheHandyman1]

Start doing side jobs on nights and weekends. I did side work for years before going out on my own. It helps build a customer base so that when you finally do go at it full time you have lots of work.

[@marshallhepner6087]

Thanks.

[@jimmyh1983]

Do you have to be licensed of some sort where you are to do these different types of trades...i.e. electrical or plumbing or anything else?

[@TheHandyman1]

That up for interpretation.

[@djohnson3678]

superb skills and traits you have. bless you . excellent vlog !!

[@coldhardysucculentswithkdw4988]

this is crazy awesome. love the truck that has everything!

[@franklinkelley9545]

What is the metal endcap for?

[@Amy-ot4jg]

I've been scrolling through all the comments to find the same thing so far nothing I've watched a couple of other of his videos and he seems very skilled so it seems very unusual to put a piece of metal there to me and that's not very nice looking the only thing I can think of is a shortcut a lot of times people get what they pay for and he said he was getting paid $0 an hour

[@TheHandyman1]

@@Amy-ot4jg The metal flashing is to protect the end grain of the wood. Standard siding procedures.

[@eandatoo]

I gotta get me one of those cordless circular saws 👍

[@grayman9786]

What was causing it to rot right there?

[@jeffhickman9723]

What kind of paint sprayer was that

[@petestreet7535]

What kind of wood did you use?

[@CORYJOHNM]

Not as pictured.. but I like that tool jacket. Hadn't seen that.

[@aaron8564]

Was there something wrong with the fascia and soffit in the rest of the house coukdent tell in the video

[@TheHandyman1]

+Aaron Savage its original to the house from the late sixties and is due for a replacement

[@barbarasanchez4239]

What type off wood did you use?? I need to do this to my house!

[@Amy-ot4jg]

It look like Cedar