Repairing Windows Boot Partition and Boot Files | [Resolved] bootrec fixboot access denied

[@neilssterling5122]

I don't have words to express how grateful I am for this video tutorial!!!! Since I decided to install Debian alongside Windows it just screwed up the mbr in a way that I couldn't fix. Even after uninstalling Debian. This tutorial fixed the problem very easily. Can't thank you enough for this!!!

[@EyezOfTheBeholder]

Thank you. This just got me up and running again after cloning my ssd drive and experiencing boot failure.

[@ormics]

I just cant THANK YOU enough!!! Oh my god it worked like a charm!

[@szymonpawowski1916]

Amazing tutorial. Thank you very much. This fixed my laptop!

[@shyamrajendran]

You're a lifesaver! Thank you so much for this!

[@sridharpadaki9609]

wonderful step by step guidance. definitely fixed my problem. Thx thx

[@dodesz6560]

Thank you very much!❤

[@min_mit]

Thank you bro for this tutorial. My PC works now!

[@JoieStar82]

Thanks for the steps. Now my laptop is fixed.

[@abdennour183]

I show a lot of videos and try all methods even it's seems similar to this but didn't succeed.... but I have succeed with your method .I must save all this command for future problems 😂 thank you very much ❤❤❤ But in my case the windows system appears in disk :d not c: ...then I choosed d

[@nelsoncontreras2039]

Thank you so much, you are a life saver

[@JorgeAdolfoMartinezGutie-by9rj]

Muchísimas gracias, me sirvió bastante

[@LeoiTech]

Thank you very much, works perfect here.

[@aenjelica]

What do I do if after “ bcdboot c:\windows /s g: /f all “ it says “failure when attempting to copy boot files” ?

[@NwAZeno-c6c]

thank you so muchhhh.. fix my issue.. i was using raid disk mirror and somehow the boot sector is located on the other targeted mirror disk only and not in the master disk

[@yrage6177]

I did all those steps but still the /nt60 sys command didn’t work

[@franciscogalvan498]

thanks a lot!!!, you save my life :)

[@JhonyHDV]

No found bootsect /nt60 sys. Dont foun partition error

[@anmac6910]

I'm getting this error after completing all the steps above and restarting the windows 11 vm again normally: Your PC device needs to be repaired The operating system couldn't be loaded because the system registry file is missing or contains errors: File: \windows\system32\config\system error code: 0xc000014c What should I do ?

[@emilianomartinez271]

You saved my life!!!!

[@lordbebech]

Still getting acces denied when trying bootrec /fixboot after bootsect /nt60 sys

[@maraz9288]

THNKKKK YOUUUU SOOOOO MUCHHHHHH

[@neferer]

Thank you very much.

[@MathMagicMoments]

Can i disconnect the usb boot pendrive once I'm done with this process? Btw thanks it's working now

[@Huremix]

Thanks, work fine for me

[@Atomcracker]

I have completed all the steps as mentioned. Just as you showed on the main screen the fixboot command was successful after the 2th time. But the same problem occurs, when the PC is starting up it enters the windows where I can press 'del' for example. And after a few seconds, it crashes and reboots in the same loop over and over

[@tinytips4823]

You may try other commands like: 1. chkdsk f /r C: (C denotes the system volume) 2. DISM /online /cleanup-image /restorehealth 3. sfc /scannow There may be some other thing that may be causing issue. Few months back I had an issue in my system where my laptop was booting fine and then crashing. Then rebooting and crashing. Sometimes it rebooted till the windows logo appeared then froze and crashed. The cycle continued. After all software trouble shooting, I tried checking my RAM. I used windows memory diagnostic tool and my laptops Hardware diagnostic tool, to check my RAM. The diagnostic tool checks for hardware issues before booting into OS. So it rules out all probable software related issue. The extensive test found that one of my RAM stick was failing. But the failure was not persistent. RAM failed 3 out of 4 times. So, I took out the RAM. Blew dry air to remove any dust on the pins on the board. Used an eraser to rub the pins of the RAM gently and remove any possible carbon deposition. Then cleaned the RAM pins with Isopropyl alcohol. Then seated the RAM in its slot. Since then, the crashes are gone and the RAM passes 5 consecutive extensive Hardware diagnostic test. May be RAM is giving issue in you case. You may try testing your RAM when all software troubleshooting fails.

[@smamas114]

After the steps in the video still not booting , i had to go to recovery and use the startup repair after that he repaired the c drive but when booted to windows a blue screen appeared, critical process died , after the restart it went to desktop...after couple minutes system service exception bsod .......i have installed a new ssd m2 and clone the other ssd and i had some bsod error but i couldn't see in the bsod viewer and i have changed the uefi to legacy and changed to something else there and because of that was not booting in the first place , no i am running chkdsk and found errors again, i hope i am going to fix it because I don't have time to reinstall windows again 😅

[@findinggreatness]

And how do you expect me to do this when my computer is not functioning

[@jack-5977]

I kept having "access denied" but i went on and it worked anyway, even having the " 0 other windows"

[@संगीत94]

[@eslamessa5002]

i love you ❤

[@ablahtarn]

it work for me 🎉🎉🎉🎉🎉

[@yash_2203]

THANKYOU THANK YOU THANK YOUUU 🙏🏻🙏🏻🙏🏻😩😭😭😭😭😭

[@dkvloger1890]

Thanksyou sooo much u save my pc ❤️❤️👏🥺🫂

[@irmantaspilypasinformacini9165]

Thank you very much !!!😎