Replace chain on Pole saw Ryobi one+ 18v

[@janiezany]

Thank you so much for your video. When I went to clean inside my Ryobi pole saw, the bar and chain fell off. I figured a video on how to replace the chain would show me how to get it put back together again. The part, where you mentioned the arrows on the chain, was especially helpful. Initially, I put the chain on backwards; but your video set me straight. Thanks again.

[@Toolspecs]

I'm so happy that I was able to help you to put your bar and chain back together. Thank you for your nice comment and for sharing your story.

[@SanfordLloyd]

Explained in a step by step logical process, not rushing or speed talking, the camera angle was spot on and not jumping. Well done!

[@Toolspecs]

Thanks for this nice comment. It's nice to know people appreciate all the work that goes into those videos.

[@jamiejones8508]

I’ll second that :)

[@jamiejones8508]

More helpful than the ryobi one (although I still can’t find a video for my version of the ryobi on plus pole saw :-()

[@Toolspecs]

What's your pole saw model?

[@jamiejones8508]

@@Toolspecs good question…OPP1820? Slightly different from the one in both your video & ryobi?

[@robertlee8613]

Exactly what i was looking for. Thank you sir

[@Toolspecs]

Perfect! I'm glad the video helped.

[@stallionjr2009]

Very helpful video. Thank you ! 👍

[@Toolspecs]

@@stallionjr2009 thanks for watching

[@julietatj7227]

Thanks for sharing your knowledge👍...A question... The tensioning screw does not tighten...why?

[@Toolspecs]

Thanks for the question. The tensioner screw is a infinite screw, meening it doesn't bottom up against a nut or anything else. It's made like this so that you can keep adjusting it as the chain stretch. The only thing that will make it feel like it tightening would be if the chain is over adjusted. If you meen that it doesn't adjust the chain, then your chain is probably over stretch and you need a new chain. Or the pin isn't in the hole of the bar.

[@julietatj7227]

@@Toolspecs Thanks for the response, I was able to adjust it after a thousand laps.😊

[@tylerdoughty5586]

Awesome video

[@Toolspecs]

Thank you!

[@sophiemavros]

Thank you 😊

[@Toolspecs]

Welcome

[@SejalPatelDrSej]

excellent video

[@Toolspecs]

Thank you!

[@mabelbaiges1271]

Gracias.... funcionó

[@Toolspecs]

Welcome