Replace Toyota Sienna Taillight Bulbs- Brake, Turn, Reverse, License Plate 2011-2018 3rd Generation

[@babyshaya]

The only 3rd gen Sienna liftgate trim removal video on KZbin! Well done

[@niceguyDoug9000]

Thanks for the vid, saved me a lot off stress.

[@sempermac5741]

This worked like a charm. I did not have to take off the entire liner. I took off the liner only on one side where I could access the tail lamp bulb. 5/29/23

[@michaelmarano834]

The tail light is absolutely serviceable!!! Only a single #168 bulb lights up the entire tail light. The auto stores also say it’s not serviceable but it’s only that single # 168 bulb!!! The same bulb as the license plate bulb!!! Toyota must want to soak us for big bucks! Great video, though.

[@mikemarkham7463]

But how do you get the bulb out? I can't figure that out

[@DellOlio93]

Thank you for the warning out how loud it is. I would’ve totally freaked out if I didn’t know that ahead of time.

[@jennys5kids]

So thankful for these videos!! I just replaced my license plate bulbs all by myself!!!

[@rw3476]

Very helpful. Makes removing the tailgate panel much easier. Thanks

[@Aero2992]

Nice video. One thing I suggest when I replaced my rear lights was to take a qtip and put a little silicone grease on all the clips. This helps any future removal of the plastic panel.

[@mariopietraroia4279]

Getting ready to change my tail lights this weekend, im glad i found this video. Dealership told me i had to change the whole assembly so i bought a new one off amazon hopefully it is just a bulb and i can return the assembly

[@steveofsd]

My turn signal bulb burnt out and I'm too lazy to read the manual, thank you for taking me to school. I don't understand why do people give thumb down, there's no wind noise, no shaky camera, or accent that so thick that it needs sub-title to understand what the instructor is talking about. Keep up the good work.

[@blutsx]

Thank you!

[@abedzantout6980]

Thank you very much for this video. The LED panel on the driver side on the Tailgate went out on our 2011 Sienna and I had no idea how to get to it. Now I can go buy a replacement and do it myself. Now I have to find the connect part number. Thanks again.

[@James-qd2ud]

This was very helpful, I was able to replace the two bulbs in the tail lights the day before I found this video, I wish I had seen this first, I saved a lot, I enjoy doing stuff my self

[@japnikki]

Thanks for sharing!!

[@RedGingerRoot]

Thank you for this! Now I don’t have to wait for my husband to “find time” and I can do it myself.

[@sherrythirn1484]

I have a 2017 Sienna XLE that had a burnt out tailight only. I was able to get to the one side of the cover where the lamp is located without taking the entire gate cover completely off. Went to our local Toyota counter and purchased a single lamp for $2.08 plus tax and no I did not need to replace the entire housing either. Simple and cheap fix.

[@gavinshackleton3080]

I can confirm from experience that a 168 led light bulb will be a direct replacment for the OEM liftgate light. You DO NOT need to replace the whole liftgate light to fix the light.

[@johnkoehnen3183]

I can double-confirm. DO NOT buy the $60-$100 replacement light assembly. For $7, I got two 168LL bulbs from the local NAPA and that solved the problem. The cover comes down easy. This is a 5 minute job once you have the new bulb.

[@ALLw3rk]

Thanks fellas, saved me time & money.

[@randomsechrist]

The tail lights on the rear door can be replaced. In the video you mention that they are LED and must be completely replaced. This is not true. It is a simple 161 bulb that cost $5. I just replaced it in my 2012 Sienna.

[@areza15143]

Same here, in my 2011 sienna it was just a 168 bulb. It looks deceptively like it’s connected to the light panel but it really isn’t- It’s just an anchor for the connector which branches off into two other connectors: one for the tail light panel, one for the reverse light. I think the reverse light is a 191 bulb. No LED lights at all. No need to replace the whole panel

[@tonganhorsepower]

Thank you for this info.

[@vladkeberis3407]

😂I purchased new lamp

[@nickmillican4341]

How do you swap out those bulbs in the tailgate if you don’t need to replace everything

[@mojojo33]

Awkward spot but easy $7 fix...

[@Fenton1979]

Thanks for the video. Was able to replace my license plate lights using your step by step instructions.

[@Noka1219]

Thank you. I want to mention one thing. You don't need to replace the whole assembly for inner (trunk) tail light bulbs. You can simply replace them. 2 x 194 bulbs for both sides.

[@danielchuen5337]

Agree, the light bulb is just above the reverse light bulb.

[@babyshaya]

2825 are the recommended but same diff except less lumens on the other ones

[@omid1929]

Local auto parts store advised that that these trunk tail lights actually take 168 bulbs (12 volt). I compared these to the 194 bulbs which are 14 V according to the package. Be sure to verify with a local professional if possible

[@ryannishio7176]

The best tutorial on the web!

[@notthereyethomestead8413]

You avoided the main taillight, removing it. Thanks!!

[@narenerussell]

Thank you for your video. I need to change my license bulb. The dealer wanted to charge me $52 just for the bulb. I will attempt to change it myself thanks to you.

[@Jerry4050]

It's very easy I did this for my mothers minivan on her 2012 Toyota Sienna and changed them to LED lights, the LED lights are only $10 for 10 lights in Amazon

[@khizerhayath4132]

.

[@saintsimonp]

@@Jerry4050 did you need to take apart trim on the inside or were you able do it all from outside of minivan thx

[@TheJoecb]

Very nice video. Thanks for taking the time... however the license plate lights are removable from the outside of the hatch, no need to remove the entire trim panel when all you need is a small flat head screwdriver. Just FYI

[@teamgeorgefitness3032]

Glad you wrote this. I’m about to change them!

[@michaelwintercorn8141]

Can you explain, please? I'm about to do this on the wife's van. Thanks

[@CatFunny700]

I appreciate your video thank you! I am a mom and with kids and my van is my life rn, no other way to work.

[@bt_martin]

Thanks for this! Saved me a trip to the dealership!!

[@dannykennedynguyen]

Thank you very much video it very helpful for everyone want to change the light broken. thank you. Kennedy

[@johnkoehnen3183]

For replacing the rear taillight bulb: DO NOT buy the $60-$100 replacement light assembly, YOU CAN just change the light bulb. For $7, I got two 168LL bulbs from the local NAPA and that solved the problem. The cover on the door snaps off easy for access to the bulb socket. This is a 5 minute job once you have the new bulb.

[@dandejonge4800]

Was this for the tail lamp? I have my rear driver side tail lamp out.

[@ykumar72]

Thanks, very well explained

[@peterspiller4183]

Thank you, changed a broken reverse light! Really appreciated your video as saved me paying for the same. Thank you!

[@emekabonaventureozokolie4428]

Very well explained, thank you sir

[@georgederisse9564]

Great job buddy. Very helpful video. Thanks a lot. You just saved me some money. 👍👍👍

[@Skilla206]

Thanks for posting! Was wondering how to change the tail lights

[@suengyim8421]

Thank you so much for your help and support.

[@gregorychampion6391]

Thank you! This was perfect

[@badboy2day2011]

have you ever replaced the weather strip on the rear door you just worked on?

[@demsala4912]

Great instructions on the video, you did a great job, Thank You for your help!!

[@brianh849]

Nice Job! Thanks for sharing/posting.

[@kermitalexander6655]

Great video I seem to find these videos when I'm not looking 👀. 👍

[@johnsoncheng8580]

Good video. Nice and clear. Thank you.

[@daniepelletier5876]

Thanks a lot very helpful video.

[@quangngocdoan6710]

Thank you for your video. Very helpful ! Great job !😀👍

[@doseofsense4727]

For those saying he is wrong about having to replace the entire assy if the LED lamps go out, I think his assy is different. I could be wrong but that assy appears to have a 'C' shape cluster of LED's. You can also see when he has it removed and takes out the individual signal bulb that there is no other individual bulb but there is a receptacle for the plug that powers the LED's.

[@rollaevo99]

awesome tutorial.....by the way, I have 2017 Sienna LE but I want to swap the clear tail lights from 2011 Sienna SE, is that possible? is the connection on the back are the same?...….Thanks!

[@joshuatoms968]

Thanks for the help I have to replace my license plate lite bulb

[@somecallmeraichu]

Thank you ... very helpful

[@fh3486]

That's work. My tag lights are out and I'm scare to do this

[@IMP3TIGO]

Nice video, very helpful, thanks!

[@rmarty]

Thank you, it was very helpful.

[@cjtheus]

Thank you for your Video Recording, that I will need in the future.....

[@rayreyes5405]

Good info, but maybe you should add part numbers of the bulls you might need if any weekend DIY-ers wanted to do this? Just an idea.

[@damson2809]

Can't change out just the license plate LED without pulling the panel?

[@heiaheiaheiahei]

thanks for the tutorial

[@rubiconklbrutorowman7577]

Good job body, BUT U forgot ONE thing that is light bulb on passenger side rear when U lift trunk.

[@Samyboy938]

Any link for the third top brake light?

[@juliamartinez2249]

My lock jam on the rear door can't get it to open have you done something like that

[@JimmiePorterAtStuartArts]

Great vid...solved me!

[@sauronthegreat5799]

Why does Toyota make the red rear lights led but the turn signal and reverse uses regular bulbs? Why not make everything led?

[@rohanthompson6800]

Where do i get the side tab that slides in?

[@918Mitchell]

4:15 this is the same as on my 2009 Toyota Venza

[@jonphanspromotions]

do you have the part number for the tail light? My passenger is not working. Thanks

[@notorioussouljur]

Thanks for the vid

[@professormosheeinat1096]

Thank you! saved me a lot of time! grait!

[@patrickquezon]

What part number of every light because you did not mention it that would do perfect..

[@robertvargas2820]

Thank you so much

[@Aces77777]

Good job Thanks

[@visualvirtue9640]

Thanks for posting!

[@sonyxxmunions]

Stupid question here, but I hope someone can answer for me. Are the brake lights off and then turn on when you push the brakes? Or are they always lit when the lights are on and then turn brighter when you push the brakes?

[@danielthan44]

sonyxxmunions turn brighter when you hit the brakes hope I helped

[@dt1mdlara]

Nice video, but you were wrong about the LED tail light. It is actually NOT LED, but just lit up by one #168 Bulb. So you really don't have to replace the whole assembly, ONLY the light bulb. Come on man!

[@otsmalls1580]

Correctomundoo

[@joedaniel787]

Man i was getting ready to brake the piggy bank🤦‍♂️thank you

[@DanielLopez-dg8xd]

Yeah Michael is correct the LED tail light is only lit up by that tiny bulb

[@TruongNguyen-hq6ed]

Thank you very much!

[@tantedang]

Thank you!

[@jado4you]

Thank you

[@toddtaylor2191]

fantastic

[@farfromluzin]

Can't imagine how many people bought the entire taillight assembly based on this bad info. LOL. $3.00 bulb vs $55.00 taillight housing.

[@josepaul102]

Mistake in mint 6. We can change the back door brake light buy bulb 168 code 14v4.9w bulb. Same like twist the next bulb holder same way you do for reverse light bulb. This is not led in door side it may be looking so but not. I changed it just now

[@zeta6798]

Thanks

[@farfromluzin]

Wrong Wrong Wrong. The tail light can be replaced. No need to buy a complete assembly! wow. did you read your owners manual?

[@bartderemer9464]

Even the autoparts store couldn't figure that out but the bulbs are replaceable, no need for whole assembly

[@chuckm3520]

Was helpful replacing license plate bulbs. Including pulling the bulbs out would have been appreciated. Little difficulty removing the the #168 lamps.

[@Kopaigora]

No need to remove the entire lift gate cover - you can reach the back-up bulb after prying just a few clips on each side

[@chevytahoe9346]

Replacing the entire unit is not true, that's what I thought, with further examination it's a bulb

[@stateboy80892]

I wish they made them so you can just replace the led modules itself instead of having to replace the entire housing 😕

[@hillshepherd9444]

To the dumb Dem interrupting my video: There's something " HUGE " alright. Mirror Mirror on the wall????

[@bond1j89]

The lights are badly designed and end up corroding, they are also over priced as far as I am concerned.

[@perritochihuahua2094]

I see why sienna loosing price ..honda all the way .... Crapi oil filter tech .... Deal braker

[@nowthatsfunny1]

Toyota sucks. Why are they competing against germans to make the worst designed cars ever?

[@youarerightboss]

Thanks.

[@angellizarraga6050]

Thanks

[@hyara401]

Thanks

[@scottbuckley2082]

Thanks

[@jingweijiang6223]

Thanks

[@BroMark1611]

Thanks