By far the best video on this repair no running their mouth just simply doing the work great video bro thanks a lot 👍
@JP-ku3heАй бұрын
Great video love that he just got straight to the point and showed the entire process
@EuroboostUSA Жыл бұрын
Superb! I love this style of footage. Catering to those who have a baseline of knowledge, up to the skilled technician. Well done.
@PurpHaze8302 ай бұрын
You don’t have to remove power steering pump, you only have to remove blower hoses, the bracket bolts for those said hoses, and the bracket bolt for the power steering high pressure line, you flip the bracket upwards after removing the bolt and push it out of the way. I did it last night and it took me 1 and a half hours maybe just a little more, removing the pump adds on and extra 30 minutes because then you gotta replace the seals for the pump beings you removed the pressure off of the old seal and now that seal probably won’t seal the same again.
@hugolrivera26744 ай бұрын
El mejor video creo que yo puedo gracias brother
@saraaru51372 ай бұрын
Great job. Thanks for sharing.
@IShould.veKnown Жыл бұрын
Awesome video. Thank you for posting!
@I_eat-water.9002 ай бұрын
Great job
@shawn9635 Жыл бұрын
Hi, hey this is really helpful to me because I'm going to be needing to replace mine soon and looking at this video, I think I can actually do it. I have 1 question though..in the part where you put it back together and tighten the bolts down, I see you give the specs for torque..I don't have any way to measure torque, so can I just tighten until it feels right or do I HAVE to torque exactly? Again, Thank you for making this video👍
@kitlacaden Жыл бұрын
Yes you can tighten the bolts even without torque.. make you sure you dont overtight. ;)
@shawn9635 Жыл бұрын
@@kitlacaden OK Thank you, I appreciate your reply..hey one more thing I just thought of, I see I'll have to move the power steering unit meaning the belt too, so when putting back together how do I know how tight to make the belt..same way, just make sure it feels right?
@kitlacaden Жыл бұрын
This unit is using auto tensioner for tension of the belt.. means no need to adjust.. just bring back to original rotation of the belt.
@shawn9635 Жыл бұрын
@@kitlacaden oh ok man that's convenient..thank you for your reply/help👌
@A.W.GundamXCX11 ай бұрын
Super late but for future reference, 8-10 ft-lbs is basically hand-tight if you're using a regular sized ratchet (keep in mind the longer the ratchet handle, the more you'll be able to easily "hand-tighten" it)
@Blaxicanking093 ай бұрын
Great video🎉
@ThePhtillman Жыл бұрын
What is the part number for the gasket kit?
@PurpHaze8302 ай бұрын
Since nobody else answered. Here’s part number for fel-pro brand. FEL-PRO VS 50614 R Valve Cover Gasket Set
@scubamaggy Жыл бұрын
Could you please tell me what sealant and grease you used on the gasket and O-rings. Thanks
@kitlacaden Жыл бұрын
We are using genuine Honda liquid gasket 1216E.. im using new engine oil for o-ring ang gasket ;)
@scubamaggy Жыл бұрын
@@kitlacadenThanks so much!! Awesome video. 👍
@PurpHaze8302 ай бұрын
It’s called Hondabond. It’s a grey liquid gasket. Permatex makes the same exact stuff it’s called ultra grey gasket maker
@yUNGFRo2323 күн бұрын
Part number for the spark plug O rings ?
@mellscott22685 Жыл бұрын
Great work!
@abel37455 ай бұрын
HOLA , LE HICE EL CAMBIO DE LA JUNTA AL MOTOR Y CUANDO PRENDO EL CARRO SIENTO UN SONIDO DENTRO DEL MOTOR , COMO ALGO ROSANDO, QUE PODRA SER POR FAVOR, A LA HORA DE QUITAR O COLOCAR LA TAPA SE PUDO HABER MOVIDO ALGO ??
@Derp209 Жыл бұрын
Whats the name of that tool you used to pry out the spark plug tube gasket??
@kitlacaden Жыл бұрын
Special Service Tool (SST) only supply by honda ;) i forgot the part number
@Derp209 Жыл бұрын
@@kitlacadenGotcha, Thanks! Great video by the way!
@Peelerusa6 ай бұрын
That's an oil and grease seal removal tool that you can buy at the big box tool store (Harb.. Freig..) For about $7 bucks . No "special" dealer tool needed. I would recommend using the dealer gasket kit and the Hondabond RTV sealant over aftermarket brands. I learned the hard way after having to fix some other aftermarket parts failures in the past. I find Japanese cars to be finicky with most replacement parts.
@Derp2096 ай бұрын
@@Peelerusa Thank you so much! I ended up using a pry bar since I couldn't find the name of that tool, It works, but you gotta be careful of damaging the the mating surface with the edges of the pry bar. This will make my job easier the next time I need it, I appreciate you sharing the name of the tool! :D I totally agree with you. I always go to the dealer for almost every part because of their quality, compatibility and longevity. Every few years and sometimes even more, I find myself having the same problems and having to swap/repair the same parts that are aftermarket and end up spending more money and time on the aftermarket parts due to their reoccurring issues compared to the OEM parts. Now a days I just keep the OEM parts and learn how to rebuild them with the kits at the dealership if they're available. It might not be like this for others, but to each his own.
@DSPAINTWORKZ8 ай бұрын
How come you put sealent in 4 places?
@kitlacaden8 ай бұрын
Thats the correct way and standard procedures base on the shop manual ;)
@DSPAINTWORKZ8 ай бұрын
@@kitlacaden awesome just wondering bout to do daughter car
@PurpHaze8302 ай бұрын
You need ultra grey permatex
@zinejj2 жыл бұрын
Hi !!! Location please if you are in Riyadh
@kitlacaden2 жыл бұрын
No sir... im from jeddah
@mashwani052 Жыл бұрын
@@kitlacaden hi.. I think i need the same also for the oil container pan.. I am in jeddah pls share ur number
@brandonhaney70025 ай бұрын
Hands-down, the most annoying background music I’ve heard on any video all year. The content of the video is good, but I’m not sure it’s enough to offset it…Freaking annoying. At least loop the shit, right
@jerickanmccrackin Жыл бұрын
Pp
@fernandoreynoso5066 ай бұрын
Is there a reason you can’t talk. Give tips as you go along
@Dss.productions6 ай бұрын
He’s skipping through some of the steps he took in the video