Replace Your Washing Machine Door Seal Gasket Band Spring LG, Samsung & Daewoo Easy Hack

[@oheyrachelllxo]

You have no idea how long we tried getting that thing back on, using the wrench is brilliant! Thank you! 💪💪💪

[@How-to-repair]

Glad I could help mate! Please remember to subscribe to our channel, as that really helps us 😇 Since we work very hard in our warehouse making free video guides for you all on appliances, we always appreciate a beer, offering a choice of single or round beer. www.how-to-repair.com/help/buy-paul-a-beer/

[@eldudarino1979]

Great tip. Worked for me after an hour of increasing frustration. Thank you.

[@CryptoKiwi23]

Mate you are a legend! The spanner and zip tie did the trick still had to faff about but eventually got it. Your a legend!

[@How-to-repair]

Huge thanks mate. I'm glad it helped you. I would love you to leave your opinion on our poll about manufacturers building in obsolescence to appliances. kzbin.infoUgkxygHomnUySd_bYjaJBdEHPO6T4dYo9Ahm Please remember to subscribe as that's is what keeps this channel going. Thanks😇

[@SkyNet-ty1tm]

Thank you. The hack works !

[@How-to-repair]

Huge thanks for your donation mate. I will use it to upgrade my technology! Wish you a happy Christmas!

[@colinsace1]

Done this on a beko washer/dryer the other day I got for free as they wanted rid of it and got a new one. it had damaged door seal so I replaced it so I could sell it which I did last night, but Never in my life have I had so much trouble getting on a door band as I did with the beko brand it felt way to small but I took it off so knew it had to go back on. Me and a friend with some thin screwdrivers stretched it and took the both of us to get it on. Will definitely invest in one of these tools next time.

[@lukehawkins3027]

16mm spanner worked like a charm. I owe you a beer mate !!!!

[@How-to-repair]

I'm glad you managed to get it working just before Christmas. It normally keeps peace and quiet in the house when it washes working correctly. Have a great Christmas. Please don't forget to subscribe to the channel.

[@andrewcutajar6221]

Thank you for the tip! It is indeed frustrating when fixing these bands!

[@How-to-repair]

Happy to help! The simplest things are always the best

[@foxtrotvictorsix8996]

My god I have struggled this week trying to get this trim back on Thank you so much simple hack like that would you believe it thanks again.

[@MajorTom546]

Legend! Best instruction on KZbin. You saved my Saturday morning.

[@How-to-repair]

Great to hear mate! I will continue to invest the beer donations that I receive predominantly into the new video technology that I'm learning with tracking cameras and better audio to make it easier for everyone to understand. I'm also employing someone now to assist me in my workload. You can support us by donating to our website www.how-to-repair.com/help/buy-paul-a-beer/

[@kenrutherford5512]

Worked for me. Could not open the ring enough by hand. The spring is too strong. Fortunately had cable ties and a spanner on hand as I was traveling with limited tools. Thank you!

[@How-to-repair]

Glad it helped and great to hear mate thanks a lot for your comment! Please remember to subscribe to our channel, as that really helps us 😇 Since we work very hard in our warehouse making free video guides for you all on appliances, we always appreciate a beer, offering a choice of single or round beer. www.how-to-repair.com/help/buy-paul-a-beer/

[@NV-ul3mc]

Fantastic hack! Cable ties and a spanner...I can't believe it worked!! Thanks for sharing, as I was just about to give up and call an engineer.

[@How-to-repair]

The simplest hacks are the best @NV-ul3mc please remember to subscribe to our channel as that really helps us kzbin.infoe432SAb2g08 Thanks, Paul 👍

[@DanielMuir1]

Worked a treat - thank you 🙌

[@How-to-repair]

Thanks a lot for your comment mate! Please remember to subscribe to our channel, as that really helps us 😇 Since we work very hard in our warehouse making free video guides for you all on appliances, we always appreciate a beer, offering a choice of single or round beer. www.how-to-repair.com/help/buy-paul-a-beer/

[@wgpid]

Had it done within minutes thanks to this hack! Much appreciated!

[@How-to-repair]

Glad it was helpful to you mate. Since we work very hard in our warehouse making free video guides for you all on appliances, we always appreciate a beer, offering a choice of single or round beer. www.how-to-repair.com/help/buy-paul-a-beer/ Thanks 👍

[@neileshsood1]

Great tip! I only had one cable tie but that was enough to stretch the metal ring from one side 👏🏽👏🏽👏🏽

[@How-to-repair]

Great tip mate! I'm glad my video was helpful to you. Please remember to subscribe to our channel, as that really helps us 😇 Since we work very hard in our warehouse making free video guides for you all on appliances, we always appreciate a beer, offering a choice of single or round beer. www.how-to-repair.com/help/buy-paul-a-beer/ Thanks, Paul 👍

[@danielmielnik9000]

Jesus Christ! 20 years in industry and struggling every time with this bloody spring especially one on the tub... Pliers ordered!!! (on eBay slightly cheaper) . THANKS MATE!

[@How-to-repair]

You never stop learning mate I've done a whole playlist on these lgs I like the new machines, especially when they're putting the part numbers on the components. @danielmielnik9000 please remember to subscribe to our channel as that really helps us kzbin.infoe432SAb2g08 Thanks, Paul 👍

[@erichartke4331]

Wow what a life saver! Thank you! I still had to fight with it a bit but it was a good work around. I'll be ordering the tool for future repairs.

[@How-to-repair]

Thanks a lot for your comment mate. Hope you can fix it!

[@erichartke4331]

@@How-to-repair I replaced the pump but I still have black plastic debris draining out, so I'm thinking I have degrading hose perhaps.

[@techguy666]

Hi Paul, thank you for al the tips. I have a quick question, how do you level a washing machine after it's under kitchen worktop? there is no access to put a level on top.

[@How-to-repair]

You would make sure the floor is level first, if the floor is higher at the back than the front, you would adjust the machine befor you before you slide it in

[@Kabeljauwsje]

Such a helpful man you are. Thank you ❤

[@How-to-repair]

Thanks a. lot for your comment mate. Please remember to subscribe to our channel, as that really helps us 😇 Since we work very hard in our warehouse making free video guides for you all on appliances, we always appreciate a beer, offering a choice of single or round beer. www.how-to-repair.com/help/buy-paul-a-beer/

[@Kabeljauwsje]

@@How-to-repair Subscribed! And bought you a beer. A Stella Artois, because we lived in Belgium for over 20 years.😀😉

[@conred6635]

Thanks so much mate this was doing my head in finally got it done after 4 agonising attempts before once with this method. 👏

[@How-to-repair]

Glad it helped mate. It would be really helpful for me to get my video shared and help us fight appliance waste! Please remember to subscribe to our channel, as that really helps us 😇

[@siulan9455]

Thank you for the advice really helped with the rear spring for my Hotpoint Washing Machine. I had so many troubles with that inner spring!!!!

[@How-to-repair]

Hi thanks a lot for your comment and I'm glad it helped. It would be really helpful for me to get my video shared and help us fight appliance waste! Please remember to subscribe to our channel, as that really helps us 😇 Since we work very hard in our warehouse making free video guides for you all on appliances, we always appreciate a beer, offering a choice of single or round beer. www.how-to-repair.com/help/buy-paul-a-beer/ Thanks, Paul 👍

[@deveize]

Great trick! I used a 4th hand tool (park tool bt2 cable stretcher)for bicycle brakes to pull the zip tie tight enough

[@How-to-repair]

Great tip too mate! Since we work very hard in our warehouse making free video guides for you all on appliances, we always appreciate a beer, offering a choice of single or round beer. www.how-to-repair.com/help/buy-paul-a-beer/ Thanks, Paul 👍

[@maximilianhase6647]

Fantastic hack. I was on the verge of going crazy.

[@How-to-repair]

Hi thanks a lot for your comment and I'm glad it helped. It would be really helpful for me to get my video shared and help us fight appliance waste! Please remember to subscribe to our channel, as that really helps us 😇 Since we work very hard in our warehouse making free video guides for you all on appliances, we always appreciate a beer, offering a choice of single or round beer. www.how-to-repair.com/help/buy-paul-a-beer/ Thanks, Paul 👍

[@jagermeister902]

Tnx for the hack! It worked out for me!

[@How-to-repair]

Glad it was helpful to you mate. Please remember to subscribe to our channel, as that really helps us 😇 Since we work very hard in our warehouse making free video guides for you all on appliances, we always appreciate a beer, offering a choice of single or round beer. www.how-to-repair.com/help/buy-paul-a-beer/

[@noldushumlesnurr6169]

Great tip, thank you.

[@bennji_af]

My friend you are a genius. Thank you!

[@How-to-repair]

Hi mate, thanks a lot for your comment. It would be really helpful for me to either share the channel or at least post it to your friends. My videos might not be KZbin superstars, but they save Appliances from the scrapheap. Share and help us fight appliance waste! We also appreciate a beer after a hard day of creating free appliance repair guides in our warehouse, offering a choice of single or round beer. www.how-to-repair.com/help/buy-paul-a-beer/ Also don't forget to subscribe to our channel, as that really helps us. Thanks, Paul 👍

[@DeepakKumar-lv4te]

thanks Paul, great tip for the band, really helpful. thx

[@How-to-repair]

You're very welcome mate glad it was helpful! You can also support us by donating to our website www.how-to-repair.com/help/buy-paul-a-beer/ Thanks, Paul 👍

[@armidhaliwal8061]

Legend! Saved me time trying to figure it out myself. Would you have any clue as to why it would pop off while spinning? (It did not break)

[@marelharsveld4821]

What a great hack...thnx a mill...

[@How-to-repair]

You're welcome mate! Please remember to subscribe to our channel, as that really helps us 😇 Since we work very hard in our warehouse making free video guides for you all on appliances, we always appreciate a beer, offering a choice of single or round beer. www.how-to-repair.com/help/buy-paul-a-beer/

[@seeker4430]

Thanks a lot for all the info you are sharing.... Could you please make a video on the connections to the main board for a bosch or siemens washing machine... There are so many connectors and its confusing

[@How-to-repair]

Glad you enjoyed the video, but with regards to the Bosch that would be an impossible one for me to do because I would need to do videos on every different type of circuit board and there are so many

[@seeker4430]

@@How-to-repair oh... I understand... But is there a pattern say most of the boards have ay the heater which is a two wire connector, the door lock would be a 3 wire connector etc? is there some hack to figure out which one is what in case we dont take a picture of it before disassembling?

[@nomadvehr827]

The clamp just came out on mine thanks for the tip.

[@How-to-repair]

Hi thanks a lot for your comment and I'm glad it helped. You can support us by donating to our website www.how-to-repair.com/help/buy-paul-a-beer/

[@Mcscoops14]

Legend, thanks for the tip.

[@How-to-repair]

No problem 👍 some of the simplest tips are the best

[@Null_Experis]

Simple as. Love it.

[@seedbob]

This works a treat.

[@Rosey7625]

Amazing I did it. Thank you . ❤Thank you Paul

[@How-to-repair]

I'm very glad to hear that it helped. All I'm trying to do is teach in the correct way that everyone understands. It would be really helpful for me to get my video shared and help us fight appliance waste! Please remember to subscribe to our channel, as that really helps us 😇 I will continue to invest the beer donations that I receive predominantly into the new video technology that I'm learning with tracking cameras and better audio to make it easier for everyone to understand. I'm also employing someone now to assist me in my workload. You can support us by donating to our website www.how-to-repair.com/help/buy-paul-a-beer/

[@eustudios2208]

Hi can you add a sponge filter before the impeler? Many thanks

[@janwim1]

Thank you so much!!

[@How-to-repair]

You're welcome and great to hear mate thanks a lot for your comment! Please remember to subscribe to our channel, as that really helps us 😇 Since we work very hard in our warehouse making free video guides for you all on appliances, we always appreciate a beer, offering a choice of single or round beer. www.how-to-repair.com/help/buy-paul-a-beer/

[@johnny787]

Brilliant!! Thank you.

[@How-to-repair]

Thanks mate. Please remember to subscribe to our channel, as that really helps us 😇 Since we work very hard in our warehouse making free video guides for you all on appliances, we always appreciate a beer, offering a choice of single or round beer. www.how-to-repair.com/help/buy-paul-a-beer/

[@garybaird2499]

Thank you after an epic battle with my machine.

[@How-to-repair]

Our pleasure mate! Please remember to subscribe to our channel, as that really helps us 😇 Since we work very hard in our warehouse making free video guides for you all on appliances, we always appreciate a beer, offering a choice of single or round beer. www.how-to-repair.com/help/buy-paul-a-beer/

[@someblokecalleddave1]

Top notch mate, thank you very much.

[@How-to-repair]

Glad it helped mate, thanks a lot for your watching. Since we work very hard in our warehouse making free video guides for you all on appliances, we always appreciate a beer, offering a choice of single or round beer. www.how-to-repair.com/help/buy-paul-a-beer/ Thanks 👍

[@koz4957]

Mate, you saved me. Amazing.

[@How-to-repair]

Glad I could help mate. Could you do me a favour and take part in a poll I've made about the lifespan of appliances? You just need to tick one of two boxes. It will only take about 10 seconds. This might help us improve how machines are made in the future😇 Here's the poll question: www.youtube.com/@How-to-repair/community Also sharing will get more people to participate and we will have a greater impact with the manufacturers thank you for helping.

[@tibitiby1921]

Saved my life Tysm.

[@How-to-repair]

I am happy to help you mate👍 Since we work very hard in our warehouse making free video guides, you can always donate us via www.how-to-repair.com/help/buy-paul-a-beer/ Could you also do me a favour and take part in a poll I've made about the lifespan of appliances? You just need to tick one of two boxes. It will only take about 10 seconds. This might help us improve how machines are made in the future😇 Here's the poll question: www.youtube.com/@How-to-repair/community Also sharing will get more people to participate and we will have a greater impact with the manufacturers thank you for helping.

[@deebee3901]

Excellent!

[@How-to-repair]

Glad you liked it! The simplest hacks are usually the most beneficial @deebee3901 please remember to subscribe to our channel as that really helps us kzbin.infoe432SAb2g08 Thanks, Paul 👍

[@deebee3901]

@@How-to-repair already subscribed. We love you in Australia!

[@debbiethacker2775]

Worked for us thankyou

[@How-to-repair]

Hi thanks a lot for your comment and I'm glad it helped. Please remember to subscribe as that's what keeps this channel going. Thanks 👍

[@RoyBigBoy]

Zip ties not strong enough for mine , had to resort to another method.( The tyre lever method , but it worked in the end?

[@brianalcuaz]

Hi! We have a washer NA-S056FR1BP, the band went off but I'm not sure where the spring is located is it also in the bottom?

[@pasti67]

Love a good Hack!! 👌

[@How-to-repair]

I've been doing this for over 40 years, and I only learnt about it recently

[@paulschultz9145]

Holy crap. Thank you!

[@How-to-repair]

You're welcome mate! I'm really pleased the video was helpful to you. Could you do me a favour and take part in a poll I've made about the lifespan of appliances? You just need to tick one of two boxes. It will only take about 10 seconds. This might help us improve how machines are made in the future😇 Here's the poll question: www.youtube.com/@How-to-repair/community Also sharing will get more people to participate and we will have a greater impact with the manufacturers thank you for helping.

[@Gumkolvi]

Great tips. Thank you

[@How-to-repair]

Glad it was helpful! Since we work very hard in our warehouse making free video guides for you all on appliances, we always appreciate a beer, offering a choice of single or round beer. www.how-to-repair.com/help/buy-paul-a-beer/

[@southpark159753]

I think mines stretched out already or I have the wrong pliers. It barley stretches it at all. What happens if I don't out the spring in and try to do a load?

[@tahirmahmood3597]

Great job ❤

[@How-to-repair]

Thank you! 😄 What would really help me to get my video seen as I'm no IT expert is to either share the channel or at least post it to your friends my videos might not be KZbin superstars, but they save Appliances from the scrapheap. Share and help us fight appliance waste! @tahirmahmood3597 please remember to subscribe to our channel as that really helps us kzbin.infoe432SAb2g08 Thanks, Paul 👍

[@jimwilson6469]

What exactly does the wire band do? Mine broke a month ago and I've had no issues with it leaking.

[@davidcathro3510]

Thank you so much

[@How-to-repair]

You're most welcome mate. Please remember to subscribe to our channel, as that really helps us 😇 Since we work very hard in our warehouse making free video guides for you all on appliances, we always appreciate a beer, offering a choice of single or round beer. www.how-to-repair.com/help/buy-paul-a-beer/

[@sushmashrikanth2029]

What does that chain call?

[@maxmontes6552]

Thanks❤

[@How-to-repair]

You're welcome 😊 Since we work very hard in our warehouse making free video guides for you all on appliances, we always appreciate a beer, offering a choice of single or round beer. www.how-to-repair.com/help/buy-paul-a-beer/ Thanks 👍

[@sushmashrikanth2029]

That chain is broken and how to buy? Pls if you have it's link pls help me

[@How-to-repair]

I would need to have your full make and model number, including the PNC number. I will be happy to help. www.how-to-repair.com/contact-us/

[@jmerey]

Thank you

[@Pinkysek666]

Super 👍

[@How-to-repair]

Thank you 👍 Please remember to subscribe to our channel, as that really helps us 😇 Since we work very hard in our warehouse making free video guides for you all on appliances, we always appreciate a beer, offering a choice of single or round beer. www.how-to-repair.com/help/buy-paul-a-beer/ Thanks, Paul 👍

[@TheWangbolizhong]

👍👍👍👍👍

[@_mackenziie]

Now try doing it for the inside one

[@How-to-repair]

90% of the time that will not work on the inside one

[@kellylloyd3183]

Is your name Paul?

[@hoysala.s.7704]

Woow , I had to sit down for 30 minutes to put that ring , but ended up frustrated

[@Tristan-tx9mt]

Yeah? Do the other one further in the machine seal. Have to have the damn tool

[@aymannabil3044]

🫡

[@Sw-bs3wi]

I am going to find you and I am going to give you a massive hug. I was about to lose my actual mind 🫠

[@Sw-bs3wi]

Actually, I take it back. It doesn’t work either 🫠