Replaceing oxygen sensor on 03-07 honda accord 3.0v6

How to replace a bad oxygen sensor on a 2003 to a 2007 honda accord 3.0v6. Like this video give it a thumbs up , have any questions leave them at bottom. Also consider subscribing stay tune for more ⚒

[@josephmcgrew8867]

Only one I found showing my vehicle other than the other v6. Thanks for the help

[@LIVEEVENTINNOVATIONS]

OMG How is that engine bay so clean and new looking at this time? LOL. That's insanity and amazing!

[@KnuckleHeadGarage27]

Lol customer keeps their vehicles cleaned up and after I do any service I completely clean it all so in future I can find leaks if they happen. I do it on all of my own as well

[@LIVEEVENTINNOVATIONS]

@@KnuckleHeadGarage27 Mine isn't nearly that clean or rust free in the North East (New Jersey). But, she's been rebuilt and heavily modified. HAHA. 330 HP, no turbos! 360view.me/files-2/mugen-j30a5.jpg

[@LIVEEVENTINNOVATIONS]

That's a ported and polished Intake Manifold and 79mm Throttle Body from a 3.7L Acura MDX. :P

[@LIVEEVENTINNOVATIONS]

@@KnuckleHeadGarage27 Nice work. If I was in North Carolina, I would come to you. Thanks for the video too. Clearly my race car still needs its o2 sensors. HAHA

[@KnuckleHeadGarage27]

@@LIVEEVENTINNOVATIONS no problem and yeah the vehicle actually had been sold the customer called me said transmission problems wouldn't go anywhere when hot like all 4 neutrals. Checked it out and the fluid was full but didn't smell good also trans was making a whining sound and it had over 200k and at this point the owner was done doing anymore so I helped sell the vehicle for like $800 and a guy got it to put another transmission in it and drive it . It had alot alot work done to it and pretty much I had done everything to it . If I had the time and money I would have bought the car and fixed it . Not alot people know but these cars and so many others actually has a transmission filter that needs to be changed and if not it will cause so many problems like transmission failure

[@cincoone4946]

Did your car not want to run when it was falling or just told you to change it

[@KnuckleHeadGarage27]

Bad gas mileage and had a check engine light on . After swapping a new sensor the light never came back on for a 02 sensor

[@aquialonsoniko573]

Did it work ?tia

[@michaelalemansr.8565]

Skips the whole install and uninstall process 😂😂😂

[@willpage79]

Is ur engine a non interference enigne?

[@KnuckleHeadGarage27]

Mmm can't remember but i believe it is but if u look it up on Google you should be able to find out . that's how I found out on alot of other vehicles I've repaired in the past

[@AlMai222]

It’s interference.

[@aquialonsoniko573]

Was this the bank 1 sensor 1 ?

[@KnuckleHeadGarage27]

No I can't actually remember . But u can Google it an should pull up a pic of what sensor is on this car . Or for each vehicle If I'm not mistaken I said what sensor it was but not sure

[@Jaydogg209]

Its the one on top of cat by the firewall. I first had a code p2195 so I replaced the sensor and the light stayed on even after reseting the battery terminals so I went back and the code this time was p2627 now I'm starting to think I have to go to the dealership for a pcm update. I read that even though its the top 02 the code could also be cause by the 02 under the cat causing the top one to read improperly. I don't know what I'm going to now. Shits pissing me off.

[@aquialonsoniko573]

@@Jaydogg209 seems like you need an experienced mecanic on this one,tomorrow one good one prehonda dealer mecanic it's going to check mine,crossed fingers.

[@Jaydogg209]

@@aquialonsoniko573 let me know what he says. I'm going to drive it for a few days and see if it goes away. 02 sensors are different than other codes you can just reset by 0bd2. The last time I got a code for my bank 2 sensor 1 (on the opposite side) I replaced the sensor when the code was intermediate and it stayed off. This one has stayed on.

[@aquialonsoniko573]

@@Jaydogg209 I'll let you know,mi case is p2195 and p0325 knock sensor,let's see.