Replacing A BMW E90 Blower Motor in 43 Seconds

Affiliate link to blower motor: amzn.to/3LCdteb
As an Amazon Associate I earn from qualifying purchases.
Does this video make this look easier than it is?
Kind of. It's a relatively simple and straightforward job but the motor assembly doesn't want to come out or go back in with much ease.
Valeo 715048 is the part number for the OEM replacement. This part includes the blower motor resistor. BMW part number is 64119227670.
The vehicle in this video is a 2008 BMW 328it that has had the blower motor wire harness recall addressed.
Perform all work at your own risk. I am not responsible for any injury or damage.
Tags: bmw, how to, blower, motor, replacement, e90, e91, e92, e93, e9x, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 328i, 335i, 328xi, 335xi, M3, fast, repair, squealing, squeaky, rumbling, wagon, coupe, convertible, sedan, removal, fix, new part, fan, interior, hvac, heater, air conditioning, resistor

[@A_S377]

Thank you for not spending the first 15 minutes talking about your life and long term goals and showing us you visiting your local parts store. This is what the world needs.

[@TheFlowPows]

Exactly this types of videos im looking for when i'm searching for stuff like this

[@Bastacat]

Same thing, no fucking about, just basic info how to replace it.

[@Mezhdunami]

Oh lord, never have I've seen a better tutorial, Thank you sir! ♥

[@kingtazk]

Wow, never in all the years i been on KZbin have I ever commented on a single video. This video is perfect. Thanks so so much. I am frustrated as it is 103°F outside, and I needed to change this blower quick.

[@mahranmalik446]

You absolute legend. You know what you done here with the way you made this vid, major respect

[@benspeeder]

Dude you could show a lotta folks how to make the ultra efficient DIY vid! WELL DONE

[@ultra1obscene]

did this today, turned out there was a bit of broken plastic stopping it spinning, removed and put back together and all working. I was having a nightmare trying to get it back in, removing the footwell ducting (literally pulls off a guide clip) makes it 10x easier. thanks for the vid.

[@CanucksCollector]

Best tutorial I’ve ever seen, thank you For everyone else doing this job, use a marker for the position it sits before you remove and transfer the mark to the replacement. Got the job done in 30 minutes

[@michaelpiantine8816]

This is how a DIY simple fix video should be. No bullshit stories half way through, no bullshit “hey did you check my other video”; Well done!

[@pokercurrency]

This was brilliant, enabled me to change my fan in the same time it took to watch the video! Thank you!

[@colorado.e9x]

Best tutorial out there. 5 years ago when I replaced the blower motor on my first E90, I was probably there for a good 20-30 minutes. This time it took me 10, taking my time. One tip: take the air ducting and yank it down, it moves somewhat freely and gives you the extra room you need to wiggle the motor in/out

[@chriswilson3196]

this is how every how to video should be

[@tyron41356]

Keep making these videos man 🔥🔥🔥

[@thorhacker1590]

Incredible dude, thank you so much! So succinct, so easy!

[@TAEDAONLYONE]

Just fixed mine, appreciate the upload. thought I needed a heater core before this!

[@boardinggrp1]

Dude. You just saved me a lot of work!

[@christianlkkakarlsen2293]

Best tutorial in a long time, thank you for making it easy

[@jamiepayne4601]

Best video out there 😅 exactly what you want, not a 45-minute dialogue of how you can and can't do it!

[@bmwfitness28]

slowed it down to see how it's done..thank you so much .I'm glad that is was to the point

[@grzesiekqwert5124]

Best tutorial ever! That’s what we need!👌💪

[@hamzahkhan8685]

Legendary tutorial

[@DemonChicken316]

Best DIY ever.

[@TheLegendaryphenom]

Mine stopped working. Had the recall a few years ago. Had no visible issues wrong. Took it out, sprayed contact cleaner all over motor, tested, reinstalled, works like a champ again.

[@markpodonnell]

I subscribed because he didn’t say please subscribe and got straight to it. You’re our hero. Ty

[@Zacharylewiis]

Dude you are the MAN ❤️

[@warnin6925]

This is the best Tutorial ever thank you

[@glennfernald1292]

Thank you!! Took more than 43 seconds but I did it thanks again

[@gr8502]

great quality, too many people breath heavy for 30 minutes before getting to the 30 seconds of content

[@gonecamping4007]

Good shit mate!

[@LewisFoster]

Thank you so much! Did mine without snapping the locating lug. All fixed for £25!

[@ultra1obscene]

where did you get the blower from?

[@LewisFoster]

@@ultra1obscene eBay. Plenty about.

[@JerTaicho]

My dude, you have my thanks !!

[@ciscofromcali]

Had to like this video

[@sebastiansaxon]

Amazing thank you!!

[@Doctor9Raccoon]

this is how you do a tutorial ❤

[@tyron41356]

Now I LIKE THIS VIDEO 🙌🙌🙌🙌no “so here’s what we’re gonna do “5 minute intro “

[@BenFenner]

Greatest. DIY. Video. Ever. Instant subscription. I don't care. I'm in.

[@Xzizia92]

Fucking legend :D Love the "nailed it" at the end. I have once repaired it on my previous e90 and once repaired it on my current e90. Today it's time to replace this one as well :D

[@S42069]

Bravo, sir

[@nickname1392]

Hilarious and informative.

[@wtbyguy83]

Every tutorial video should be like this!!!!

[@slicedbread9003]

That's good. Compared to so many cars, that looks so easy. The worst is the Volvo 240. I hope you don't have to do it. I have drilled a squirted one of my 240's the other I did the full replacement over a weekend.

[@lancejohnson4203]

Thanks. It saved me a $500.

[@shwah5112]

holyyyy this was amazing i cant stand 5 minutes of rationale before replacing simple parts

[@brysonneff4083]

The clip holding mine is is broken off? How do k remove it now

[@thechannel8x]

Why don't we have more of these videos? FML if I have to listen to a random dude screaming at me "Whaaaaateeeease up youtube today guys....". Thanks for being to the point, here, upvote, have it

[@williamhuggett7577]

My ADD thanks you sir!

[@Liebe_und_freude]

Where does the tiny wire go that I took with me? Great video!!

[@jackhammer9867]

Litterally so fast I was in shock and joy it was that easy

[@AlexandruTudorMunteanu]

Thanks, today i change it , all good till the end , just when u try to rotate it in her spot take me 10 min, in rest very easy🎉🎉❤❤

[@castel32]

God so simple!! No BS Video. I would give you 1000 likes for not wasting my time. 43 seconds is shorter than the intros on other videos. Yeah!

[@castel32]

Job done ! I just took mine off, found a tissue caught in the middle of the blower and took the opportunity to grease the bearings in the blowing motor. Now runs flawless. 👍 Thanks

[@jasamasa9106]

This is how every diy video should be done 😂👍👍

[@Monocog007]

WAGON POWER.

[@tommyyoung9413]

I love you bro haha

[@flaatheaad7544]

that was epic. Best tutorial ever

[@jamesd8610]

Mine won’t go back in no matter what way i try to screw it on

[@aimized1460]

Amazing ❤ I managed to install my blower motor just by watching this no joke

[@greenbeginner3353]

How long did the job take in real time?

[@AHFixIt]

It took me a little over an hour.

[@paulkinsey2479]

love it lol

[@damon123jones]

awesmoe

[@ocasion3051]

My e90 throwing ac but on the dash passenger is throwing cold and hot on driver side

[@AHFixIt]

You are low on refrigerant

[@ocasion3051]

@@AHFixIt how much does it need? Because i just used a 12z can and still nothing. Wonder if has something to do with blower resistor

[@ridicule-topic1216]

10/10

[@FaderSkate]

Lmaooooo man you might as well make videos about how make videos 😂 these other KZbinrs miss the point

[@S.T.R.Y.K.E.R.]

😐 thank you.

[@6ixvamp]

(But mines better) 🤣 gotta say man, I’ve always wanted a wagon

[@confidential8371]

Mine had water in it .....

[@jamesaddison81]

I can confirm this job does not take 43 seconds.

[@6ixvamp]

Definitely not, 30 minutes minimum though

[@mikemaster9545]

lol yeah ok 43 seconds! lol

[@RB028]

I can't rotate that blower out for the love of even after ending up breaking the tab ..!!!