Replacing a Power Steering Pump

Replacing a Power Steering Pump
• Check belts for cracks or oil contamination
• Check hoses for leaks or wear and consider replacing them if they are older than 5 years
• Inspect the power steering system and suspension
• Compare the new product to the old product
• Always install a new reservoir, if applicable
• Every part should be installed to factory torque specs
• Flush the system with recommended fluid type
• Vacuum bleed the system every time a line is open
Feel free to share this video: • Replacing a Power Stee...
Follow us on LinkedIn: lnkd.in/d2B4CyVn
Visit our website: www.pwrsteer.com/
LIKE and SUBSCRIBE for more PWR videos

[@kmadabushi]

Very good explanations of power steering Mechanism and maintenance which normally the Car Mechanics at show room try to avoid

[@user-vw9nk8fy9i]

Thank you mu friend

[@PrinceSteering-nh9mj]

Am steering engineer by profession I work and repair all kinds of steering pump and racks..

[@atueyiokey3704]

Does power steering pump require the engine to run before steering the wheels

[@antonioguerrero2720]

Excellent video.. thanks

[@kahair.kahair303]

😢😅😅😅😅😮😢ততথ😢

[@zakidz5595]

Thank youu Im from algeria in africa ❤❤

[@PWRSteer]

Thank you for watching!

[@timothycompton919]

911+QQQQQ+

[@jerrisonjoe6962]

After installing a new pump I noticed when I rotate my steering back and front on without moving the car it starts vibrating like the force is dropping and can be noticed on the speedometer

[@PWRSteer]

Hi, If you have not already vacuumed the system, please do so. To vacuum the system: 20 inches of vacuum for 15 minutes. If you are holding vacuum, then that is good. If you are not holding vacuum, you have a hole in the return portion of the power steering system and you are pulling in air. This will aerate the fluid making it erratic (and sometimes noisy). If this does not help, please reach back out to us. Thank you, PWR

[@rannydewah8549]

Wow thank u so much

[@PWRSteer]

Thank you!

[@abdulmajidbaraludin1073]

👍👍👍

[@PWRSteer]

👍👍👍

[@EssentialXL]

How do you "disable the engine from starting"?

[@PWRSteer]

Hi Aden, Depending on the vehicle there are a few ways to prevent the engine from starting: Older models you can disconnect the coil (if there is only one coil it’s easy). Newer models (multi coils) you can disconnect the fuel pump fuse/relay, or the inertia switch - on a Ford, or the ignition fuse/relay - if it is easier to access than the fuel pump fuse/relay. Thank you, PWR

[@EssentialXL]

@@PWRSteer Thank You.

[@brentsanada6589]

"Engineered in Memphis" (MADE IN FKN CHINA)