Replacing A Trane HEAT PUMP Package Unit | HVAC Installation

[@caldun5445]

Hey man just wanna say I love your videos. Keep up the good work, you’re killing it. Just wanna let you know I am pursuing a career in hvac. Your videos have me excited to start school and learn the job!

[@codyturner2590]

Did you have that dolly made if so could you post some of the dimensions or a link where you got it from

[@davidrothstein4029]

One of the best installers I have ever seen. Always pays attention to detail and more.

[@jakefavazza1239]

We need longer videos! Love the content and I watch them when I first see it but I need morrreee

[@robertl.fallin7062]

And with a 14 seer unit too!

[@JR-ch8rt]

Bro that Dolly! Great idea 💡

[@Comm0ut]

Slick dolly! I make stuff like that but heavier duty when I move machine tools. If anyone reading this does one you can buy foam riding mower front wheel assemblies that can't go flat. I use them on riding mowers and even blade strikes don't bother them. The only thing I'd add to that one if a little extra fab work doesn't matter is a long T-handle on the caster end with the T piece being about a foot wide for easy dragging over uneven ground. A couple pieces of round bar drilled for hitch pin clips (more convenient than cotter keys, not that it matters much make fine axles. Your local steel supplier can help you and most will bandsaw parts to length on the spot. If you don't weld they will know local welders but it's an easy job. BTW if you have a pickup used liftgates are easy to install (they sell the adapter brackets online) and they will save your back without requiring a trailer.

[@lowe_30]

I do duct envelope testing, it is required in city limits in Tennessee on new construction or duct replacement I live close to Nashville area need a duct pressure inspection just hollar 🤑

[@nhfdtb]

We but a door in the hood and have the air filter in the duct under the hood. That way you do not have to craw under the house to change the filter.

[@rottiev264]

Great job, quality work bud, keep that bar high!!

[@aceheatingcoolingcrossvill5230]

Where did you get the dolly?

[@davidclausen4271]

I worked mostly in Carrier, Goodman, some Trane

[@davytree8728]

What’s up zack love your videos Just got a pair of Marin boots Absolutely love them I’m also in the hvac in northern Cali

[@AIRMANHVAC]

Great work as usual. 🔥🔥🔥

[@shanegreen268]

I love watching your videos. Thanks

[@pelon542]

another outstanding job,keep it up bro 👍

[@mattflorence6060]

Did you make that rain shield or did you buy it? If you made it, could you go over how you do that. Thanks.

[@aleksandzubko3913]

where did you buy this dolly?

[@242topboss]

Awesome & clean as usual ✔️

[@neilvestervictor180]

quick precise and clean great job

[@danbrown5133]

What type of cart that is hauling the system?

[@HVACGUY]

Can you make one of those package unit dollys for me

[@ajinroy1]

can you do a video on the dolly pls or show where you got it or made it

[@TNHVACLIFE]

Wish we had those dollys at lee

[@DWAYNE2ism]

Hey great content. I must say love that trolley

[@mingo1142]

Hey zach, could we see the video where you build your dolly? Its very nice. I searched for video, but cant find it.

[@herbie3smith]

Where did you get the dolly or is it homemade?

[@nocommentarygaming7031]

wish your videos is longer. i know its a exact swap out but still want a longer video lol maybe even each step would be good

[@gunnervines196]

They make a bracket for the accu clean to fit in have to flange one side but fits perfect

[@joeyurban5169]

Trying to find the video that you made on your dolly build, but can't seem to find it. I need it in my life lol

[@jasonmelton-uy8ul]

Me to

[@mr.r9505]

Great custom work

[@Ageehvac]

What's the dimensions of that dolly?

[@jeffgrant6914]

Good video 👍 Zach

[@shifter8207]

Im surprised trane didnt have a built in filter rack already

[@arturopalacios653]

Hi there, do you remove the video were you fabricate the package unit dolly?

[@cleansebob1]

Are those square to round transitions galvanized steel or aluminum? What/where are you buying the round pipe you start with? Looks like they are riveted or spot welded together, as opposed to snapping together like furnace pipe.

[@prestonmire5509]

Where did you get the little dolly system at

[@Cougarscream]

He makes them. There’s a video of him making one.

[@prestonmire5509]

Sweet

[@aleksandzubko3913]

@@Cougarscream can you help me to find that video of him making the dolly pls?

[@salhernandez3426]

Very much enjoyed the 3 sec of squigying tape asmr 😂

[@donnierobertson3088]

Great job like all ways

[@jayaviles7268]

I’m 16 years old right and have no experience at all. Any tips on how to get ready for this career after high school?

[@gregbowman3598]

Nice job 👍

[@davidclausen4271]

I did installs back in the day we didn’t have those dolleys

[@MrDjJboy]

Where can i get this dolly

[@DragonflyAcres2022]

Nice 👍 job

[@exceltechheatairservicesll6381]

Great job men !! I love your dolly, please can you provide me the dimensions. Thanks.

[@jasonmelton-uy8ul]

I would like to see the dimensions or the video as well!

[@muniznick]

Would a French type drain help with drain run off, used to see them on wall packs in cell locations, (hole filled with pebbles/rocks)

[@evanperrault5234]

what is the tool bag you use?

[@Deltron6060]

On the residential side do you guys usually replace a unit if the compressor is bad?

[@lukehodgson5222]

Up to the homeowner

[@calebwhitaker2318]

Options! There are options, the homeowner makes that call.

[@realestateservicessaleshea99]

🍺🍺🍺🥃🥃 I guess I better not say much because I might get attacked! Lmmfao! 😆🤣😆😂😅😅🤣👍🥃🥃🍺🍺🍺 Good job ! Excellent ! Stay safe. Retired keyboard super tech. Wear your safety glasses.

[@FlyEaglesFly19111]

What happened to the 3" pump ups?? Guess they got scraped too. I still would have used that hinged door for easier coil access. Maybe this unit will get better maintenance. I will say not liking the filter in the crawl. Out of sight out of mind.

[@Poolmedic]

I believe he said 3/8" pump ups, which were installed

[@FlyEaglesFly19111]

@@Poolmedic listen to it again..your wrong.

[@Kilo5910420]

@@Poolmedic who the hell uses 3/8in. pump ups..its 3 or 6in.

[@Poolmedic]

@Dave K My bad, 3” pump ups. They were installed at 3:45

[@bradmironik6137]

He could have used an appropriate size pad and that would provide 2-3 inches of additional height. Most homes in tn have filter grilles in a common area and a decent merv 5 filter is fine for this situation.

[@smith-mundtnews1406]

So now you’ll be bringing the access door back to Trane for credit huh?

[@baronnucleus401]

In Florida, they will fail you if they don't see mastic on any duct connection.

[@christiand.6112]

Part 2?

[@Christer885]

👍

[@shanesmith1828]

How much to make me one of those dolly

[@victorespana8574]

Saludos desde ECUADOR porfavor pon subtitulo en ESPAÑOL

[@calebwhitaker2318]

I NEED that Dolly?

[@milanlipovic7349]

Where do you get that dolly

[@carson4223]

I believe he made it

[@theElderberryFarmer]

Yes, he did make it. He has a video showing how. It's a great design and a pretty straightforward build if you have a welder.

[@phillipdonohue5]

I didn't see no video

[@weswg]

Need to run hard pipe outside

[@noway9426]

Another super tech silly statement

[@Negative13Prod]

I guess package unit aren’t good for area’s with a lot of snow. I don’t see many in Ohio.

[@Ageehvac]

Would you send me the drawing of your cart, id like to make one.

[@andygalindo8978]

Not to be rude, but it seems you do a better job when you work alone. But who wants to work alone.

[@darrankelly4963]

I dunno, I might be hypercritical here but this video is kinda gutless... 30 seconds, in the beginning, is spent talking about the cool filter rack he's gonna install, then he spends another minute later on talking about how he can't install it and how he will install a rack in the crawl space instead (Like others said: Out of sight, out of mind. Not a great solution). 30 seconds spent on a paid in-video advertisement. Two minutes of a five-minute video absolutely wasted, 40% dedicated to what? If the video is just to show off an install then that's cool, it's a nice clean install. I just feel like it's under the guise of a technical walkthrough and an excuse for product placement. Just my two cents...

[@fawazali8069]

Hi sir your country please

[@fawazali8069]

Sir please you are company job vacancy I am a Indian please help

[@FieroGTXX]

First!¡

[@FieroGTXX]

Yeahhhhh!!! This stuff gets me pumped. Gearing to launch my own business this season.

[@AaronPowellvox]

I HATE mastic tape. Please stop using it. Do us all a favor. Just stop. I do like that dolly though. Might have to make one if I changed more package units. You know. Doing it right by using silver tape and mastic so the next guy doesn’t have to suffer.

[@WilliamMarshall-w6i]

Where did you get the dolly

[@JP-sd2cw]

do you anchor these units?