Replacing an Indoor Mini Split Fan Motor on Fujitsu, Mitsubishi, and Daikin Wall Mounted Units!

[@erics9213]

Before this video, I knew practically nothing on the inner workings of a mini split. Thank you for an excellent video.

[@staffordvideoproductions5788]

Great video. 4 yr old installation. 8 screws were a struggle. Use PB Blaster and a good #2 Phillips. Cleaned the moldy roller fan with vinegar at the same time. Saved $200 labor. 😊

[@jshady4873]

I have never saved and liked a video so fast

[@maheradous9257]

Very good job

[@bb1490]

Thank you for uploading this excellent instructional video. This has helped me heaps in taking my indoor unit apart for deep cleaning. Thanks again.

[@Hemulator79]

Thank You. I just needed to clean the fan blade tube and that area. All clean now. Thank you. Excellent tutorial.

[@alexcarswell9484]

Beautiful video. Very well done and very helpful. Thank you.

[@murky2502]

I watched a lot of videos prior to repairing my noisy Panasonic fan motor. Once the motor is out, it easy to then replace the bearings. This was the 2nd noisy motor, so replacing the bearings is probably a better long term fix for mine than getting another OEM motor assembly. In my case I had the original so I was able to replace its bearings and do the swap like this.

[@robertdavenport9095]

Excellent job Brandon great poise and naturalness you filmed and explained as if the camera was not even there. You took your time too great video. I won’t to come down to Cape May to check you guys out. I’m in Essex County.

[@petercabral5612]

I agree with you 100 % Robert, best ever

[@potentialhvac6074]

Those are nice heads... I service a school that has multiple FTXS18LVJU Dakin heads and those blower wheels are a real pain to take out. Pretty much need to remove the coil or suspend the coil to the mounting bracket as you slip the plastic case off ... Great Demo 👍🏾

[@davidpotato6923]

Thank you! I've been fighting one for a bit now, that makes sense I'm like their is no way the pan drops on this

[@potentialhvac6074]

Yo I'm so glad this gave you some peace of mind, I freaking love youtube.... Aye FYI have you seen the bag that nucal makes to go over the coil for a mess free cleaing? It makes cleaning these sooo much easier and you really don't even have to take the blower out because it allows you to blast it with a hose and garden sprayer

[@USA-GreedyMenOfNoIntegrity]

Note to self. Never sell a Daikin!

[@lilymurphy6246]

I use this video to disassemble the dang thing let alone service it lol. 10/10 great instructional video!

[@danbenke5528]

Thanks Boss! very good video and attention to detail.

[@jean-francoisfortier8727]

Great explanation. Thank you!

[@douglasthompson2740]

I installed a couple of AirCon mini splits. One has been going 24/7 since 2019 and has had a squeaking noise from the blower since day one although it is still going fine, a bit louder, but still fine. The other AirCon has a slight noise since 2020 and its install, also 24/7. Is it more likely related to the rubber gasket or to a bearing on the fan? I tend to think a bearing would have gotten louder much quicker? I also have installed a Senville unit (they are all a ton and a half) in 2020 and have had zero problems with it. No noise from the fan which is very quiet. Where are parts available for these units? I have had very poor luck finding a supply house that has specific parts available for specific models. Tearing down the units and waiting three or four weeks (sometimes more) for parts is not a good option for a primary heating system here in Alaska so that parts can be matched! As always when dealing with plastic snap together parts the less they are disassembled and reassembled the better as the plastic gets brittle with age and can snap off with no way to replace those parts. I am happy to see you are getting more oriented to mini split units rather than traditional A/C as you had been in the past. Very handy.

[@Rhahdhdn]

It’s insane how hard they make access on these things.

[@eclipse369.]

Yulp

[@AllTattedUp13]

Try working on a ptac unit..makes these things look super easy. 😂

[@maness2112]

They are disposable junk.

[@sherryberry2394]

I removed entirely the set screw from motor shaft while trying to remove blower wheel. (I have a Mitsubishi mini split.) I can't get set screw to tighten firmly onto the motor shaft. (I don't see a flat side on the motor shaft.) I don't want to overtighten the setscrew. Suggestion?

[@confidentlocal8600]

My Mitsubishi Mr Slim blower motor makes a continuous whirring sound. I've lubed the blower bushing on the left side but haven't touched the motor. Before I take the unit apart: Can the motor be opened and lubricated? I can't find a matching replacement motor (RC0J30-CD) for sale anywhere.

[@arncj18]

can you not grease it, must it be replaced?

[@takeiteasymac3206]

My boss sent this to me. Great page.

[@trader8219]

Excellent video Brandon, very detailed with great instructions. I have a Fujitsu Mini Split that makes noise when the temp is on heat mode, it sounds like something is making a loud intermittent noise do you have any idea what maybe the cause? is that the reason you changed the motor on that unit? Every technician has given me a different reason, including dirt on the blower wheel plus leak in the system. I have cleaned the heat coil and the blower motor as well as adding gas to the system. It was only installed in 2018. Any help would be appreciated.

[@Jangkrikkkkberdasi]

Sir, how oil works in rottary compressor? is it go together with the freon? Thank you for your reply

[@jgm3796]

Awesome. Please do an LG next.

[@hasso0n]

Really well made guide. Thanks

[@sirraident]

Holy crap you make that look so easy 😅

[@harryschrysan3183]

Cause he is doing it in a training area. During actual service things are always more difficult.

[@rickreeder3190]

Outstanding video!

[@eulaliorodriguez5325]

Thank you for sharing this video.

[@gregoriocampo]

Thank you for sharing your Knowlage

[@300zxdriver]

Where do you buy the fan motor?

[@Jobney_]

Os brasileiros estao muito avançados em tecnologia inverter se tratando de análise de diagnósticos, se eu fosse brasileiro aproveitaria o que desenvolveram aqui no Brasil para aplicar nos Estados Unidos

[@pgdgus]

I was watching this to see how to remove drain pan. On the second system I couldn't see how the right side of drain pan was connected

[@Jamie-po9zk]

Craig looks different

[@borshardsd]

Now that you mention it haha

[@SuperComfee]

HVAC Tech here, Worked for a Residential company that made me service these things. Very difficult to disassemble in certain installation locations. Real pain in the ass they should of made these more servicable. keep it mind they aren't a;lways installed in the most ideal locations.

[@SuperComfee]

Youll be on a ten foot ladder breaking your back trying to remove the drain line from the drain pan to drop it out of the way.

[@SuperComfee]

not all fuji models are the same either. they each pose their own unique challenges.

[@keovongvilaykeo4799]

Great content thanks 🙏 you 😊

[@FunFactor2020]

Question Very Important for me= Please explain how to fix Split AC indoor unit DC blower motor connection with Universal PCB BOARD. AND Please Explain how to calculate or get common nutural wire in DC or AC blower motor.

[@lyndonlakhansingh]

I normally grease the blower bushing when I service an evaporator

[@nezarchannel4280]

hello, nice work. Would you happen to be looking for an AC technician?

[@jesusjaimevargas2928]

Excelente Thank you

[@supersussycat]

yuuuup, those things are EVIL, the other types of split systems seems more easy to service, but great video thanks 👍

[@HVAC_Tips_Tricks_Calcs]

Where's Craig?

[@USA-GreedyMenOfNoIntegrity]

Isn’t it great that they all use different specialty parts so that you can’t stock anything on your truck. Isn’t it great that it takes two hours to do a preventive maintenance on one instead of 20? I service my own Fujitsu or Gree installations, but I will never service anyone else’s anymore. Total junk and difficult to work on.

[@stoneyswolf]

replacing the motor didn't seem so that bad but the price of those motors is insane.

[@MichealDimma]

I have to do this today. I am not excited.

[@Kabul1Afghan2]

❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤

[@mikev.1034]

👍👍

[@maness2112]

The repair bill is more than the unit.

[@Rainmaker88]

@maness2112 Unless it’s warranty

[@timrob0420]

What the hell happened to Craig

[@Channel25555]

Brother, I'm Bangladesh country

[@UltraElite-ju8bb]

Take pictures 📸 123

[@ryanmoore2779]

Don’t say the F word. Mitsubishi and Daikin they cool

[@timrob0420]

Fushitsu

[@davidmaldonado3129]

That looks like a big pain

[@AlfredoGarcia-ov8sw]

Great video !!

[@rilok7363]

A Daykin lmao

[@tcphvacr9950]

“Die-kin”, not “Day-kin”.

[@Michael-pq4wd]

IMO, not worth it. Get a new head. Minisplit=disposable HVAC unit. haha