Replacing Balljoints on a JKUR (Death-wobble Remedy)

Second leading cause for the Death Wobble on a Jeep or a solid axle truck. First, we look at the Trackbar, then of course, the Balljoints.
If you have oversized tires and/or offroad your Jeep like I do, you will go through a couple of sets of balljoints in less than 50k miles.
I went with the older design Synergy and the lower ones did not hold well. Synergy reached out and sent me their very new HD designed ones with adjustable lower Balljoints. Thank you Synergy!
If you are looking to setup your JKUR with a new suspension, suspension components, bumpers, lights... or whatever you need, please reach out to me and I will get you taken care of. Ask for Kiffany.
Please check out our IG: @theoffroadalliance.com
FB page as well.
www.offroadalliance.com
888-466-8991

[@michaelanatra1293]

This is the best how to video I have seen. Thanks for calling out wrench and socket sizes.

[@michaellenheiser3157]

Great job explaining and calling out the time consuming steps. This really helps us in allowing the appropriate time required.

[@sdmarcos13]

I took out the hub assembly and axle shaft together in one piece. Works either way, just one less step on each side. Good vid.

[@WhiskeySix03]

Yep. Hub does not need to be removed. Just the three unit bearing bolts.

[@raymondchagnon]

Best video out there!!!.....currently doing the job!!

[@T-R3kz]

wow ! very detailed vid... definitely learned how to replace the ball joints . Thanks !

[@cdf8821]

Don't have a jeep, but enjoyed watching this...Great Video!!

[@dagnachewdesta3336]

Thanks it is very help full , you doing great it take you 10 hrs. I am on the 10th day now trying to replace my ball joint.

[@gilbertomartinez3087]

This video helped me a lot, thank you very much.

[@jiriza84641]

That's awesome tutorial, luckily I have the lifetime warranty!

[@adolfocolon4673]

Outstanding!

[@jkpanda7]

well done and thank you!

[@bufordmorris3682]

Great video and that is a sweet tatt

[@ryanwilly23]

This is one of the best videos on this! Where did you find the tapered cup to press in the top ball joint?

[@Ihavetopoop718]

Why does everyone take the hub off the axle shaft? Just pull the whole thing out together.

[@craigjonlyon]

Gr8 video

[@mrv4496]

Awesome job. I need to replace mine. How are the new synergy ball joints holding up? Wobble gone?

[@adriano6399]

Did they fix your death wobble after ?

[@dougjohnson9422]

I have a question. Do you have to have a tapered cup to install the ball joints. I ordered a ball joint service kit from ebay and I don't see a tapered cup in it.the kit says it is for 2wd and 4wd so I didn't know if it wi work or not.

[@jmb6420a]

Get the 4wd adapter set. It can be done without the tapered adapter but it's easier with it. The last thing you want is to Cock your new ball joint and ruin it.

[@choiceblade]

Ok, RE: lower balljoint...I did what you did! HOW DID YOU GET THE DANG PRESS KIT RING OFF YOUR OLD BALLJOINT?!?

[@brianbrake7736]

I just did the same thing this weekend and got the ring stuck and need to get it removed so am also wondering how to do it.