Replacing Cone Bearings AGAIN | Art of Motorcycles

[@SpilTrez]

Roughly 1.5 years years back, I had to change my cone set from ArtOfMotorcycles. After a smooth 11,000 km covered within 6 months, I got them checked in AOM and they couldn’t identify any problems with it. Recently, I started to feel some resistance while steering Nora. I got SKF bearings fitted temporarily in a garage in Trivandrum. Even after replacement, I felt the bearings locking up and the handlebar was consistently stiff. Unhappy with this come set, I decided to head to ArtOfMotorcycles garage where Zoheb bhai replaces it with a new NTN cone set. Complete details are explained in this video.

[@suriyav5258]

Can you share shop address, My himalayan also Handles bar stiff, Royal Enfield showroom said neeed to change cone set.! I intrest to bhai shop.

[@prince1995moh]

i too got my brother Himalayan first chain for 36k km life.

[@prince1995moh]

and i have brought the same ntn conset this time.

[@SpilTrez]

@@suriyav5258 Art Of Motorcycles No. 51, 7, 1st Main Rd, Pukhraj Layout, Adugodi, Bengaluru, Karnataka 560030 goo.gl/maps/45oERkv4GmhvM7yn9

[@suriyav5258]

@@SpilTrez .Thank you brother:)✨🙏

[@somaiah88]

Nice to see a professional approach to service n maintenance. However I soo wish they used a bearing press / compressor to fit those cones and not a hammer.

[@misterarun1]

The particular issue which I'm facing currently in my Himalayan bro. It's just run around only 5300kms. But i felt this issue from 3500kms itself. Showrooms PPL are not good at this repair bro. Really fed-up with them. Now i can show this video with them🥰🥰

[@pranavkashyap7309]

Hi. I'm also facing the same cone set issue with my relatively newer bike (1500 km). Most RE service centres said it is not an issue and that it is naturally like that and one centre tried to fix it but the issue started again after a few days. Should try it with some other service centres now.

[@SpilTrez]

Yep, I did the same thing initially; I knew authorised service centres wouldn't do the job. As a result, I took it to Art of Motorcycles.

[@shivamsawant5420]

this is so cool!! would love to see more uploads like this..👏✌️

[@SpilTrez]

Coming at you soon :D

[@josephee6160]

Mechanic's English is on fire

[@ChethanSrinivas]

This is some surgical level of service at AOM. Worth. 1. Is there grease inlet for maintenance w/o dismantling the stem?

[@tamizhan1197]

Hey man ! I'm a new sub . Saw all your old videos . You're just great . Keep going . Happy and safe riding

[@SpilTrez]

Thanks a ton man :)

[@44musher]

I saw where a Himalayan owner installed a zerk fitting to the steering head to grease it regularly.

[@bhoopalreddyrv5207]

Good to see you after a long break❤❤

[@SpilTrez]

Good to be back as well.

[@omkarpatil7777]

Nice video man keep up the good work 😀😀

[@SpilTrez]

Thanks 😁

[@abhishekpatil24]

very informative broo, need some more like these....!!!!!!!

[@SpilTrez]

Coming at you soon :)

[@daddymiru]

Finally he is back

[@aashikdastu9890]

Doctor of himalayan❤️

[@sreethulip1859]

Best Service Team ❤️.

[@shivuanerabiker]

Spiltrez nice video as always 👍

[@kudipudiraghunadh]

Will visit the Art of motorcycles when I cross through banglore ✌🏼 Waiting for the next one to know about service charges as well 😉

[@SpilTrez]

Coming up soon :)

[@mrhaaxx]

Welcome back brother

[@russelladler1030]

Great fan of your content and especially your video quality 🔥 we need fan meet-up

[@SpilTrez]

Thanks, man. I had plans for a meet-up this month, but due to unfortunate issues, I have postponed it.

[@Himachal_ka_Yuva]

Plz get a video on adjusting the rear mono shock

[@greenhunter4745]

My bike 11500 km runed. sometimes feeling powerloss , showroom service is such a waste.

[@haxzie]

Bro, did the Autoengina crash-guard lose all it's coating/paint? it looks dull now.

[@udaykiran1857]

Art of motorcycle is the heaven place for bikes which are reform and refurnished into such way they are brought to life again. Kudos to zoheb bhai and crew . Crew are much best than Enfield service center. 💯💯💥❤️

[@ZakiUllah]

ONLY TRUE BIKE LOVERS WILL WATCH THIS VIDEO TILL END.... ❤‍🔥❤‍🔥

[@Mikhail269]

Only spiltrez lovers

[@ultilife31]

😂

[@rahmanabi9297]

Yes yes😊😊

[@IdlyVada]

I understand. I'm leaving early

[@m9jdamor]

Service wale bhai ka KZbin p kya name se channel h?

[@monkdiaries]

Nice explanation..... I have Apache but when it comes bike the problem are same... I have chain noice issues .... Soon i will be there 😁

[@SpilTrez]

Go on :)

[@neil9381]

This is the type of guy I always wanted to service my bike....a dream unless I move to KA

[@achukrishnu5115]

Please make a video about Himalaya timing chane issue...

[@ajith_4119]

Bro waiting for u r new videos and watch u r old videos again and again😄💥🔥🔥

[@SpilTrez]

Thank you so much 😀

[@Jeru_on_the_road]

I have a question? If you replaced the bearing with them last ? How come you have run into this problem? Because when the bearings have been installed and sealed , they should not give this trouble. How many kilometres after 11000? Did you notice the trouble and had to replace it ? I don't get it? How did the lubrication wear out ?

[@SachinKumar-cc1eu]

Hey bro What if we don't change the cone set ... what will be the problem

[@anzalmuhammed2448]

Bro first ntn bearing only lasted 11k km..how does it happening?? It is just showing that ntn bearing not as good as og. Give a insight on this

[@techagni7693]

sir inform me can i set those tnt cone set on r15 v3

[@chochonhaokip5741]

Is there a plan for a new bike?

[@Himachal_ka_Yuva]

Bro can you give some information about adjusting the rear mono shock

[@SpilTrez]

Next video :)

[@animeuniverse8560]

Hi Brother- Can you tell me from which area in Bangalore did you purchase your RE Himalayan from. Also good places to install engine leg guards and headlights for Himalayan

[@prince1995moh]

how often do we need lubricant conset.

[@defencesalute8439]

Bro can i ride with you in Bangalore i also have Himalayan 2022 model

[@ashoka004]

Bro bike ಗ್ಯಾರೇಜ್ nema

[@niharkalita9762]

which clutch setting is the best for gear shifting..half clutch or full clutch??

[@trxx4986]

Do you experience any vibrations with AOM handlebar?

[@SpilTrez]

Not really

[@trxx4986]

@@SpilTrez I’m referring to the vibrations post 3k rpm. Do you have that?

[@MrSABHIJITH]

Beautiful video .. how did u learn Kannada ?

[@tiasdas4466]

Use the default metal cone joint cap not the blue plastic one

[@SpilTrez]

Why do you say so?

[@tiasdas4466]

@@SpilTrez because of the gap it creates between the chassis and the cap ..the default one creates a oil seal type thing as it is more snug than the plastic one and with the grease it creates a better sealing than the plastic one...trust me I've tried it earlier

[@ashwin_wildlife]

Approx how much did it cost

[@pratik226]

Do they service Dominar 400

[@SpilTrez]

Yep, they do :)

[@parthpt7039]

Lots of love for Zoef Vi

[@SpilTrez]

Me too man, love 'Zoef Vi'

[@parthpt7039]

@@SpilTrez Means a lot sir ❤️ Love from West Bengal ❤️❤️ Waiting for next part ❤️❤️

[@defencesalute8439]

Bro your bike is super

[@dibakarbaruah9829]

Amazing video

[@wingsd2153]

This is the most annoying problem for Himalayan iam tired of going to change again & again to the service centre

[@aravindtpsarayu]

Very informative ❤️

[@loheshpawar]

Hey, is it possible to get a navigation tower for Himalayan. Ofcourse it needs to be road legal. I'm desperately thinking of getting one(which is not an option cos no one makes one for this bike) or make one even it takes me 6 months. Would like to know your thoughts on it.

[@sinuslebastian6366]

Zana has a nav tower that sits behind the speedo. Check it out.

[@loheshpawar]

@@sinuslebastian6366 are you referring to the GPS mount?

[@sinuslebastian6366]

@@loheshpawar yes

[@loheshpawar]

@@sinuslebastian6366 i checked that already. It's not what I was referring to.

[@saikatdas9122]

How many kms you covered with your bike's previous NTN cone set bearings?

[@SpilTrez]

I think around 18-19k kilometres.

[@Raazzy07]

When is next?

[@SpilTrez]

Today evening/tomorrow :)

[@advaittalekar7310]

10:30 no no! no!!! Stop killing your bearing At least use a mallet or keep a wooden plank inbetween before striking with the hammer

[@ChethanSrinivas]

They should be using mounting tools to fit the bearings. In a clean room 😅. As per manufacturer's manual.

[@ozzyshrestha969]

zoheb bhai doing best

[@SpokeWheels2]

Art of motorcycle ♥️

[@SlipperrClutch]

Zoheb bhai knows the himalayan better than RE

[@musaifkhan719]

Bro where is this service center i also wanted to visit them ,,, i am impressed by there work 😌😀😀😀😀🔥🔥

[@SpilTrez]

Art Of Motorcycles No. 51, 7, 1st Main Rd, Pukhraj Layout, Adugodi, Bengaluru, Karnataka 560030 goo.gl/maps/45oERkv4GmhvM7yn9

[@sparkplugf]

After long time bro why wt happened

[@SpilTrez]

Nothing happened :)

[@sachin2842]

Namaskaraa Bengaluru 🙏

[@jaikarthikv739]

Ask him to talk less and do work simply blabbering all stuff they will not wash bike properly only if u have KZbin channel and subscriber they will do work, they services charge will be like BMW & Ducati bike charge simply waste of money self experienced. After serving i unfollowed they channel in all platforms.

[@debadattabhattacharjee3171]

How much do they charge for servicing?

[@SpilTrez]

Hi, I would like to mention that the main motive of Zoheb bhai is to ensure the best performance of the motorcycle at all times. The service provided by the team at AOM is curated in such a way that the motorcycle can be driven smoothly without any hassles for another 10,000km. Smaller service centres might provide cheaper service but only temporarily give a solution. Good, reliable service anywhere is always expensive. P.s. he wasn’t blabbering, he was trying to spread his knowledge to other riders and the rest of his team were working on other bikes.

[@jaikarthikv739]

@@debadattabhattacharjee3171 15,795 for servicing , fork service, hande bar

[@abhijeetshetty4u]

Bro you talk kannada too wow

[@SpilTrez]

I was born and brought up in Karnataka.

[@radven]

🙌🏻

[@arvindakshans852]

The actually stock one is better than this useless plastic mine came for around 28k kms

[@dineshsrinivasulup2099]

Over rated and arrogant staff !!!

[@shrivant]

Until and unless you own a KZbin channel with good no of subscribers

[@birimrachacheranmomin3540]

Really?

[@sagarmurmu2569]

Yes

[@sagarmurmu2569]

AOM handlebar is the worst; I changed in my D390 and duke vibrates because of smaller diameter of the handle as compared to the stock one, it’s really overrated and jugaad work. It’s a salesman thing, they try to convince you and make you feel you have a problem. And workers there don’t respect your knowledge; they be like main sab jaanta hoon. 😂

[@ajayns9970]

First comment😍

[@SpilTrez]

Thanks :)

[@anupamtheboss4536]

Don't Like Himalayan it's too Heavy n Slow with a sea of its Own problems , 18000kms crossed No coneset Problems with My Dominar400.

[@Vaisakhmay29]

Art of motorcycle broo,, i changed my highness bikes full chain sprockets in just 13k broo, what to do broo 🥹🥹