CHECK REPLACING FRONT WHEEL BEARING - FULL D.i.y STYLE Fourby4diesel Prado front wheel bearings HILUX front wheel bearings Toyota Land Cruiser Prado front wheel bearing replacement LC 120 with ABS.
Пікірлер: 64
@al3112723 жыл бұрын
That’s for taking the time to show this process and giving such an in-depth commentary.
@BrookBuchan-yb1tw3 ай бұрын
Here's a hint I found tonight... take the other two ABS cable clips off, flip the steering knuckle around and push the seal in, so much easier! I can't put a pic here though. Great vid, thanks!
@toddyedy95842 ай бұрын
1stly crocks Thanks so much for talking your time to show us everything
@dylanperret-db6ev3 ай бұрын
Appreciate this video alot I’m about to do mine at home tomorrow and I feel confident after watching a few videos but this is the best one I have seen
@murraypaterson2152 Жыл бұрын
I appreciate the long version! You get a much better sense of how hard to hit something (or not!).
@justinjohnson48932 жыл бұрын
Thanks for the full video. I like how you show how to do it at home however a quick snapshot of the actual tools you would use in the workshop would be really helpful too.
@crocutta6663 жыл бұрын
best video I found on this particular issue for the 120. Congrats!
@mrronaldbg79026 ай бұрын
Thanks from South Africa for this detailed Video. Really helps a lot
@siggi7573 жыл бұрын
Amazing content. Thanks to your videos I have successfully tackled most jobs that need to be done to keep my 120 in top condition. And also three other Prados that belong to friends and relatives.
@sarinsarin78982 жыл бұрын
excelent mate, i was wondering how to remove & replace the whole thing including the seal. I knew it wasn't brain surgery but cheers, best walkthrough yet.
@likemagic_kiwi2 жыл бұрын
putting back seal in two blocks of wood with treated rod through the centre pulls them in nice and easy
@petergoodall6258 Жыл бұрын
And a little bit of light tapping once the pressure is on, just to help it slip.
@JSLALCOY3 жыл бұрын
Excelent video. Thank you very much for your detailed instructions and advices. Your Chanel makes me love my LC 150.
@toddyedy95842 ай бұрын
Thanks for being real love it
@oscaratv3 жыл бұрын
Your videos are so great! Helped me so much and appreciate allot! “All right?” 😂👍🏻
@terrymosquito35552 жыл бұрын
Great video thanks for showing how to do a wheel bearing gotta abit an idea how to do it
@flincher9633 Жыл бұрын
Awsome video like the not to do parts shows were all human 😂can’t wait to do my own now
@thisarawelhena34429 ай бұрын
@52:48 yes you are correct it is 100Nm. But I doubt you can put a torque wrench in between the hub assembly and knuckle.
@iceoutdoors Жыл бұрын
This video did everything i needed, thanks!👌
@Fourby4Diesel Жыл бұрын
Glad it helped!
@xuancanhchu2108 Жыл бұрын
Thanks for your great video really helpful .
@daleandamandaferguson3873 жыл бұрын
Rockin those crocs Anthony! lol
@colfergusson42423 жыл бұрын
Another great video mate, is that normal tyre flex rubbing on the casting upper area of the hub mount I noticed, a mate of mine had this when I told him about it he reckoned tyre shop said going up in whatever size it was would be ok, as I said off course they want to sell ya a full set of treads
@GavinTaylor012 жыл бұрын
I have a landcruiser prado vzj95 4x4 petrol. 3.4lt. I am having whooshing sound at high speed. Starts at around 80kph and almost goes away at 105kph. Slight vibration as well. Another thing is the fro t drive shafts if I jack the car so load is on suspension the front t drive shaft between cv joints start to bounce up and down at that 80kph point. I would assume they should rotate and be stable and not bounce up and down. Looking forward to your reply. Changed all rubbers underneath vehicle front to back, even between body and chassis. Front and rear diffs are clean, bearings are fine tyres aligned and balanced. Shocks are good heavy duty. I'm at my wits end.
@Kreets2 жыл бұрын
Good info, thanks mate. I'm getting ready to do my front wheel hubs and bearings for the first time on my Hilux. Work on not saying "do you know what I mean?" at the end of your sentences. I knew someone who didn't realize how annoying it was.
@Fourby4Diesel2 жыл бұрын
I know what you mean 😁😂
@Kreets2 жыл бұрын
@@Fourby4Diesel Lol glad we had "the talk"
@Jer0tube3 жыл бұрын
Hey Anthony, great video, I have a 120 with 358k on the clock, I doubt very much the bearings have ever been replaced as I got it at 180k and haven't replaced them since I've had it. I notice the car has a vibration through the steering wheel at speed, that couldn't be the wheels out of balance as I've just gotten new wheels and tyres, balanced. Is this likely to be the bearings?
@georgeharvey29137 ай бұрын
Does the final pressing of the New Bearing asse need professional Hydraulic final pressing to secure the New Bearings to eliminate play before dri
@georgeharvey29137 ай бұрын
If the actual wheel bearing circular dish is worn as well as the bearings is time for the Scrapyard???
@karmann17992 жыл бұрын
The 4 bolts holding the hub on. Do they need locktite on those? Or just elbow grease to tighten them??
@tom65493 жыл бұрын
Do you need to set the preload for this type of hub/bearing?
@rustys4x4andfish9010 ай бұрын
Just wondering if the Axel nut 35mm? I need to buy a socket
@MrZaib80 Жыл бұрын
Amazing, What are the OEM part number for this complete assembly?
@zacholloway48242 жыл бұрын
Hey Mate will this be similar on a 2002 prado?
@williamdryden6568 Жыл бұрын
Great video mate, how much does your wheel bearing hubs cost. I like your long version videos, cheers, Bill
@spazzo5726 Жыл бұрын
Thanks
@smreviews62593 жыл бұрын
Great video but living in the UK and hearing you say " you are wearing your thongs" is so so wrong! I know you mean flip flops but it did make me laugh.
@madlinkendall5809 Жыл бұрын
What size is the hub nut
@pauldean64193 жыл бұрын
How do I get a price for a right front on a 2008 Toyota hilux sr5 cheers
@sjc29652 жыл бұрын
Wriiiight!!!!
@boonjabby3 жыл бұрын
Is the Hub nut 35mm ? Assume the torque is 170foot.lbs?
@marjosephferrer26483 жыл бұрын
Did you find out the size of the hub nut? My biggest socket wrench available is 24mm only.
@boonjabby3 жыл бұрын
@@marjosephferrer2648 yeah, my 08 prado is 35mm. Local tool store (total tools) had a air gun socket for $22AUD. Hope that helps.
@dancav9183 Жыл бұрын
Yes 35mm. Only 2 years later😅
@justinrichards74912 жыл бұрын
Is a 200 series the same and is the whole hub assembly inclusive available
@LuvMyDatto2 ай бұрын
Did you find answers to this mate? I'm gearing up to do my 200 as well.
@dalemartin682811 ай бұрын
How do I purchase two of the front wheel bearings from you man? And can you send them with the rear seal?
@Fourby4Diesel11 ай бұрын
That’s how they come with everything you need you send me a text message right now Monday mornings 7:30 AM is the time if you want to purchase something from me to send a text message
@danielcamilleri20853 жыл бұрын
Hi. Trying to find where I order the hub assembly x 2 with optional seal? Cheers
@Fourby4Diesel3 жыл бұрын
0490261013
@danielcamilleri20853 жыл бұрын
@@Fourby4Diesel Hi Anth. Got a delay in the parts arriving [Aust Post Issue], so i jacked the front up to get my head around the job while I wait. There's a grinding type of noise and a small vibration through the wheel [assumed it was the bearings], but i'm not getting a loose wobble in the wheels when i shake them top and bottom. If the hub swap isnt enough, what do you think could be the next to look at? Street/AT tyres on it, not muddies.
@colfergusson42423 жыл бұрын
I had a similar issue changed strut mount/bearings whilst doing wheel bearing all good, these videos are just bloody magic
@dragankostovski2017 Жыл бұрын
Great video and thanks a lot because it's all that's needed for a DIY job. Although it took five hours here it's pretty satisfactory since the local mechanic cracked the oil seal with axle installation and pieces of the retaining spring confused the abs sensor. Crackhead said since you know that much, do it yourself. And we did, thanks to this video. Cheers :)
@raymondwatkins35711 ай бұрын
Hey Anthony. I’m new to this channel. I have subscribed but how do I contact you to buy parts?
@Fourby4Diesel11 ай бұрын
Just keep watching videos in particular check the playlists ones called how to buy my kits
@daleferguson64792 жыл бұрын
Crocs! :)
@danielwalker3317 ай бұрын
is the hub nut 36mm ??? thanks
@Fourby4Diesel7 ай бұрын
No
@danielwalker3317 ай бұрын
@@Fourby4Diesel thanks 35??
@maxpeedingrodslibby6873 жыл бұрын
Here, this is Libby from MaXpeedingRods~ We have newly developed an ECU suitable for Toyota Prado, and would like to pay to invite you to do a test for us... do you have interest?
@blaser338 Жыл бұрын
Believe me guys DO NOT FORGET to put your spacers on the back of the hub as failure to do this is very costly believe me I have found out the hard way.