Replacing light bulbs on Ring FloodLight - flickering floodlights fixed

Items needed:
1. Motion Sensor Security Light
www.amazon.com...
2. 1800 Lumens flood light
www.amazon.com...

[@Twillis600]

Great informative video. Thank you! Before I did the repair, I checked with RING, and apparently I had an extended warranty. They're shipping me a new unit..."For Free"! Make the call before you do the repair.

[@arl4945]

New or refurbished? I’m in the same boat waiting for mine.

[@BetterDayzMusic]

It worked but the diagram doesn’t have the white wires all coming together with the white house wire. However, someone graciously added this to the comments section and after doing this the lights come on now. Thanks so much!!!!

[@spec.g]

Thank you for this! Not only do my lights work again, but they're much brighter than before! (2 250W LED bulbs).

[@JoseFlores-jm1yw]

Your video was on point and the wiring sketch at the end save my day as I had it wrong the first video I had watched…Thank you.

[@firehawk6188]

This is exactly what mine is doing. I was getting ready to take it down to see what's wrong with it. Thanks for sharing the info.

[@firehawk6188]

Turns out the controller was fine on mine and it was actually failed LED assemblies.

[@mij12568]

Good video. The tools were great to watch. Scissors LOL. I am doing the same thing 40 buck for the new light to harvest for the ring setup.. I would never pay for a replacement. I would not even get a replacement.

[@jt3943]

hi J T

[@k.t.6497]

This was great! My uncle did this in 15 minutes..Thank you

[@arl4945]

Bringing mine back to costco for a new one but you did a great job and very informative. Thank you

[@icanbreathenow1]

Did Costco take it back?? I don't want to do this either

[@arl4945]

@@icanbreathenow1 just saw this sorry for the delay, I've done both now, brought back to costco and returned to ring, they replaced it. Both companies are in it for the long haul.

[@doitalltolive8418]

Thank you for this video. It saved me money👍🏾👍🏾👍🏾👍🏾👍🏾

[@celinesonvaux]

Thank you for this video! I did this yesterday. It was quick and easy!

[@blakkazz21]

Worked like a charm!!! Thanks!

[@sunnydays5527]

Very useful and good instructions.

[@Watts85af]

I did this and it was very easy. Thank you

[@ragtoy99]

How can you known if the red wire from the camera module can handle the current to light the two floodlights directly, wouldn't it be better if you used a relay circuit

[@lorenskiroque7435]

Great fix! I followed all instructions however, the lights stays on. Did someone have the same issue?

[@anthonymaroulis8877]

Yes. Same issue

[@atlasanyaandamazingplaces8597]

Wow that is awesome 👌

[@GhostreaperX85]

So I won't even need that DC convert when I have to replace my lights? Makes me wonder why they even felt the need to put that in this floodlight in the first place.

[@ragtoy99]

Tnisesm 2PCS Power Relay SPST(1 NO) AC120V Coil, 30A SPST 120 VAC from Amazon. I used a relay to protect the ring camera 22 gauge wire from being over loaded. You don't want to burn up the ring camera module circuitry. Working great with two night chaser bulbs from Amazon too

[@JayDg55]

Can you provide a link to this and the bulbs from Amazon? Also how to wire it in? Please and thank you in advance

[@rhatton59]

Excellent! I was looking for this wondering about the same thing and

[@BetterDayzMusic]

Hello, it’s working but i hear some static when watching the recorded or live videos. Can you think of any reason for this?

[@peterortiz4212]

Awesome hack!

[@Hunter450rRider]

Do the fixtures you use as the replacement have to be motion activated? I have some normal floodlights laying around in the shop and would like to know if I can just use them. Thanks

[@ragtoy99]

No tou just need the bulb sockets

[@surfaceworldoceanmaster2865]

Ring offers a after warranty disc. of 35 percent for those interested.

[@Jimicrackedcorn]

I have to make a call to talk to them. I heard they won't fix it or offer a replacement, but instead they offer a discount. Definitely not going to be happy if they offer that. What's the point of the warranty if they don't make it right?

[@mikegarza885]

Works Perfect Sir But!!! Lights stay on what did I do wrong. please reply.

[@joelvvega]

Me too

[@bigblue3568]

Did this today... works except no siren or anything sound related now. Otherwise it works.

[@sandyberg6761]

I bought the same flood light but I cannot get it to work

[@peterortiz4212]

The wiring diagram at the end of the video isn’t completely intuitive. The white sensor and two white floodlight lines all need to be tied into the white power line. When I did this everything worked as if it were a new unit out of the box.

[@Telmenni]

@@peterortiz4212 does the light stay on constantly?

[@peterortiz4212]

@@Telmenni No - it works the same as the ring integrated lights. It is motion activated and can toggle on/off via the app.

[@Telmenni]

@@peterortiz4212 i just connected everything now but my light is constantly on. How did you connect all the wiring?

[@peterortiz4212]

@@Telmenni I’m going off memory but the black wire from the sensor is spliced directly into the house black wire. The red sensor wire is spliced with the two black wires from the lights. The white sensor wire, two white wires from the lights and house white wire are all spliced together.

[@anthonymaroulis8877]

If after you attempted this and your lights stay on then you may have wired it incorrectly. The red wire from the camera is essentially the on/off switch. When the sensor is triggered then power is sent to the source to turn on. I am unable to upload a diagram but generally speaking connect the 2 black wires from the lights together and the red together. Do not connect the black wires to the black wire from the AC source.

[@anthonymaroulis8877]

kzbin.info/www/bejne/gqGkaoCua5p8bbs

[@mikegarza885]

Perfect

[@eduardolacayo6237]

Is there a way you can turn it off manually on my phone? Without using the light switch

[@yesenialara3803]

Do you have instructions for the Eufy version?

[@davidmedina6663]

I think I did something wrong! I connected them but the lights are always on

[@anthonymaroulis8877]

Did you figure it out?

[@ceelosvee]

ring will replaced it if you buy the extended warranty

[@omar7643]

No need for it to be motion activated. Two lightbulbs with 1/2” male connections will thread right in.

[@rickysingh616]

Didn't understand the wiring diagram

[@robertcampbell8834]

the issue is the capacitor in the led driver most of the time. just buy led driver