Replacing Polycarbonate windows on boat.

[@michaelbeuermann7657]

Thank you

[@sleepygumbo]

Thanks for this, very helpful!!

[@aquaholic3]

Thanks for letting me know!

[@fducedam]

about to undertake the same job, very grateful for your detailed video. Wish I could see you applying the caulking. Also wonder if it would be worth it to gently heat up the polycarbonate during the dryfit so it can take the curb of the roof.

[@aquaholic3]

Hi, yes you could try that, but I would leave out in the hot while you prep the surface. Once in place, put a towel over it and add weights at each end until dry.

[@DavidPrior-co7wg]

Thank you for a very helpful video. It appears to be impossible to purchase Dow 795 sealant in Atlantic Canada. Can you recommend a source for it?

[@aquaholic3]

Sure thing. I got mine on Amazon. Dow Corning 795 Silicone Building Sealant - White a.co/d/2I4C2df

[@bybeka1]

Brilliant!

[@aquaholic3]

Thanks 😊

[@fernandakamei3140]

what is the number or the VHB tape you used?

[@aquaholic3]

Hi, here is the Amazon link of the VHB tape I used. a.co/d/8UQ7AnU

[@timothywisner-4p1mo96]

Hi, where is the follow-up video?

[@aquaholic3]

Hello and thanks for reminding me to post a follow up video and images of the final look! Will do so later this week.

[@aquaholic3]

Hi, I took a couple of pics today, but can't figure out how to add them to this post!

[@timothywisner-4p1mo96]

@@aquaholic3 Hi, thank you. No worries, your video is very helpful as it is. How you did the template was great, and it showed everything I need to know to do my own windows.

[@aquaholic3]

@@timothywisner-4p1mo96 Good! It’s a lot easier that one would think. Surface prep is the most important part. Note, if I had to do it over again, I would use the same original darker tint polycarbonate. Knowing how easy it was to remove the window, I would remove them and is use them as template.

[@aquaholic3]

Hi Timothy, I finally added a follow-up video of the finished project. See link in the description of this video.